以恒星结构与演化理论中常用的混合程理论为基础,将湍流作用表现出来的宏观应力引入恒星结构与演化模型中的流体静力学平衡方程。
Basee on the mixing-length theory of convection, macroscopical stress of the turbulence is used in hydrostatics equation of the stellar structural and evolutionary model.
本文将边界元法引入光弹性应力分析使主应力分离问题得到简化,从而使光弹性应力分析方法更简便可行。
In this paper we use boundary element method to separating main stress. It can simplify the problem and provide a practical method for separating main stress.
引入缺陷是定量环境应力筛选的关键参数之一。
Imported defect is one of key parameters in the quantified environment stress screening.
在模型中引入与木材含水率密切相关的干缩元件,解释各层的干缩差异是产生干燥应力的源动力。
Wood drying shrinkage element introduced in the model may explain the original force of producing drying stress of shrinkage differential of different layers.
在钢纤维混凝土单元开裂处理中,引入应力释放因子和剪力传递因子。
In dealing with the cracking of steel fiber concrete element, the stress release factor and shear transfer coefficient are introduced.
本文在定义对数损伤变量和相应的有效应力之后,引入了一种考虑材料内部空穴演变的裂尖损伤演变方程。
After defining a logarithm damage variable and effective stress, we introduce a damage evolution equation at crack tip bytaking into account the physical mechanism of the development ofcavities.
进一步针对轴对称问题,引入等效应变和等效应力。
The effective strain and effective stress are introduced under the condition of axial symmetry.
引入了半无限体的无穷边界条件,推导出半无限层表面的位移与应力关系式。
The relations between the displacements and the stresses on the surface of semi-infinite body are obtained by introducing the infinite boundary conditions.
引入两个势函数,在频域中得到了应力、位移和超孔隙水压力响应解答。
The analytical solutions of stresses, displacement and pore pressure amplitude are derived in frequency domain by introducing two scalar potential functions.
在风波相互作用中引入波诱导雷诺应力并用涡流粘度予以封闭。
The wave induced Reynolds stress is introduced into the wind wave interaction and closed by the eddy viscosity model.
氮化铝的热膨胀系数与硅的十分接近,因此不会引入大的热应力。
Since coefficients of thermal expansion between aluminum nitride and silicon are near, large thermal stress will not be introduced.
将ANAND粘塑性本构关系引入到焊后热处理消除残余应力的有限元计算中。
ANAND viscoplastic constitutive equation was introduced into the FE model for calculation of the reduction of welding residual stresses during the post weld heat treatment.
结果表明,冷扩张过程所引入的切向残余压应力能保持足够的强度,以对钢轨螺栓孔起到显著的防裂和止裂作用。
It is concluded that, the residual stress induced by cold expansion can maintain enough strength to prevent and retard fatigue crack initiation and growth in rail bolt hole.
引入夹芯弹性支撑作用对变形与应力的修正。
Revision of stress and deformations caused by the elastic supporting of the soft core.
基于这种裂纹单元,作者引入椭圆参数方程,推出一种计算裂纹前缘点应力强度因子的新方法。
Based on this kind of crack element, and by introducing parametric equation of ellipse, a new method for estimating stress intensity factor is proposed.
参照经典塑性力学的屈服面理论,引入了温度作用下应力空间中脆性岩石的损伤面模型,定性地讨论了荷载和温度影响下损伤面时的演化规律。
Giving an imitation of traditional plastic theory , a damage surface model on brittle rock about temperature in stress-space is introduced and the evolutionary law is discussed qualitatively.
由莫来石颗粒引入的基体拉应力使裂纹倾向于向晶内扩展。
The tensile stress in matrix introduced by mullite particles made the cracks incline to extend into the matrix.
通过基模的双折射引入有效表层应力,并制作出相应的测量装置。
Effective surface layer stress was introduced by birefringence of the fundamental mode, and corresponding apparatus of measurement was fabricated.
采用轴对称有限元法计算了油罐的整体应力,引入接触单元法模拟地基与底板的相互作用。
The axisymmetric finite element method was proposed to calculate the whole stress of tank. This method applied the contact element to simulate the interaction between foundation and tank bottom.
针对管路连接件等轴对称形式的构件,引入等效应力和等效应变。
Furthermore, effective strain and effective stress are introduced into the study of pipeline connection assemblies under the condition of axial symmetry.
预应力网格结构是一种新型空间结构,它将预应力技术引入空间结构,拓展了预应力技术的应用范围。
The prestressed grid structure is a new type of space structure, with which the prestress technique has been introduced into a space structure, thus widening the use scope of the prestress technique.
把平面问题的物理量和基本方程全部改写为复数形式,从平衡方程出发引入了复应力函数。
All of the physical quantities and basic equations of plane problem are expressed in terms of complex variable form. From the equilibrium equations, the complex stress functions are introduced.
考虑与实际生产相符的介质的双重特性和分形特征,并考虑介质的变形,引入双重分形介质渗透率模数,建立应力敏感地层双重分形介质系统的流动方程。
We establish a flow equation stress_sensitive to permeability for fractal and deformed double porous media and introduce permeability modulus of double porous media fractal reservoir.
通过引入应力复数和应变复数的概念,提出了平面应力分析和平面应变分析的复数方法。
Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.
将基于多孔介质的有效应力原理引入流固耦合渗流中,并根据平衡条件得出了应力场方程;
Principle of effective stress in porous media is introduced into fluid-structure coupling theory, then according to the equilibrium condition, the stress equation is established.
扩散所引入的应力分析。
以带气膜冷却孔的航空燃气涡轮发动机涡轮叶片为研究背景,引入了等效概念对密布小孔结构进行了详细的应力-应变分析。
An equivalent no-perforated plate concept is introduced in the stress-strain analysis for densely-distributed film cooling holes on turbine blades of gas turbine engines.
首先在多孔介质的有效应力原理中引入瓦斯吸附的膨胀应力,推导出了适用于含瓦斯煤岩的有效应力计算公式。
An effective stress calculation formula for coal containing gas is proposed coupling with the swelling stress of gas adsorption in the effective stress principle for porous media.
TIG熔修处理工艺在焊趾区引入了残余拉应力,而超声冲击在焊趾区形成了较大数值的压缩应力。
Residual extend stress is produced at weld toe by TIG dressing, while compressing stress of high values by ultrasonic peening.
TIG熔修处理工艺在焊趾区引入了残余拉应力,而超声冲击在焊趾区形成了较大数值的压缩应力。
Residual extend stress is produced at weld toe by TIG dressing, while compressing stress of high values by ultrasonic peening.
应用推荐