稍作调整并进行实验，即使128MB的机器也可以成为令人满意的桌面计算机。
With a little tweaking and experimentation, even a 128mb machine can serve as a reasonably comfortable desktop computer.
本文在磁性流体密封理论的基础上计算了磁性流体密封的耐压能力，并进行了实验研究。
In this paper, computation and experimental study of the seal capacity for magnetic fluid seal were carried, on the basis of the theory of the magnetic fluid seals.
推导出了中等稳定顶板条件下计算支护系统所需阻力和可缩量的公式，并进行了相应的模拟实验研究。
The formula of calculation of support system resistance and yieldability under condition of medium stable roof is derived and proved through eguivalent model testing.
本文导出了榕树网络的互连矩阵，并进行了模拟计算，结果与实验吻合。
The interconnection matrix of the banyan network was obtained and simulation calculation was carried out, which accords with experimental results.
对模拟转子进行了不平衡响应的有限元计算，并进行了相应的实验研究。
The finite element calculation of imbalance response and responding experiment are carried out aiming at the simulation rotor.
实验室的工作会给你使用软件来进行计算，并进行逼真的模拟实践经验。
Lab work will give you the practical experience of using software to perform calculations and conduct realistic simulations.
本文提出量仪示值变差检定置信度的表征参数，导出计算公式，计算出参数的数值并进行了验证实验。
The characteristic parameters defining the confidence are presented in this paper, the formulae are derived, the numerical values are calculated, and all of these are further proved by experiments.
本文应用模糊逻辑理论，进行模糊推理计算，设计了一类温度控制器，并进行了大量实验，控温较为满意。
The paper has designed a temperature controller by applying fuzzy logical theory and doing fuzzy deductive calculation.
提出了数字电液比例系统的数学模型及控制规律，并进行了计算机仿真及实验验证。
Mathematical model and control law of the digital electro hydraulic proportion system are put forward. Furthermore, computing simulation and experimental verification are carried out.
通过计算表明，优化设计结果和正交实验结果的最优方案基本一致，并进行了误差分析。
The results of optimization design agree well with the optimization scheme of orthogonality design. And make an error analyse.
对现有的空气源热泵热水器系统部件提出了优化目标与方向，并进行相应计算和实验验证。
The system optimization of the air sourced heat pump water heater(ASHPWH) was presented including calculating and testing.
计算了西安脉冲堆堆芯热工参数，并进行了堆芯温度场测量实验。
The experiment to measure the temperature field distribution in XAPR core has been carried out.
并且通过上机实际编程并进行计算所得到的实验结果与理论分析的结论是一致的，从而验证了DM-分解算法的正确性与可行性。
And I verify the accuracy and validity of the DM - decomposition algorithm by the uniform results between experimental programming and computing and the theoretical conclusion.
研究了相干驱动场激励下的三能级系统激发谱并进行计算和分析，给出了激发谱的变化规律，得到了与实验一致的结果。
Theoretical excitation spectra in the three_level system is calculated and analyzed in detail and the results are identical with experiments.
对涡旋膨胀机真实气体理想(等熵)膨胀过程进行了理论分析，提出了涡旋膨胀机真实气体设计压比的概念和计算方法，并进行了实验研究。
The concept of design compression ratio of real gas in a vortex expander and computational method are put forth. The corresponding experimental study has been done.
通过水跃内部运动特征分析，提出了水跃剖面线理论计算方法，并进行实验验证。
Through analysis of internal activity of hydraulic jump. This paper has built up the counting method of hydraulic jump profiles, and proved it with experiment data.
用最小二乘法建立了与实验结果拟合良好的数学方程，获得了有益的操作参数并进行了模拟计算。
Mathematical equations gained by least-squares fit the experimental results well, and the favorable operation parameters were obtained and simulated.
我们着重分析了其系统中存在的固有的非线性，给出了光程差的计算公式，找出了使系统非线性最好的参数匹配，并进行了仿真实验，得到了理想的结果。
The inherent nonlinerity in the system are analyzed , and the equation of optical path difference(OPD) is given . We obtained the best parameters to decrease the system nonlinerity .
用MARC有限元软件对一种新型钢轨———波纹轨腰钢轨进行了轧制模拟计算，并进行轧制实验，掌握了波纹轨腰钢轨变形的特点和轧制过程中的关键技术。
The rolling process of a kind of new rail——corrugated rail waist Rail was simulated by MARC and the rolling experiments was made.
其次，详细分析脉冲涡流检测的阻抗模型，改进了脉冲涡流仿真计算方法，并进行了测厚、测距的仿真实验；
Second, analyzes the pulsed eddy current impedance model in detail, improves simulation of pulsed eddy current method of calculating, and carries out thickness, ranging simulation.
并进行了复合材料板拉伸试验，复合材料平板实验计算结果和应变电测法得到的结果进行了对比，实验表明两种测量方法得到的结果相吻合。
The method was also used to measure strain in the tensile test of a composite laminate plate. The results agree fairly well with those obtained by the conventional measurement.
提出了一种针对面向对象分析方法中多尺度分割的最优分割尺度计算模型，并进行了影像分割实验。
By researching the false maximum wavelet coefficient points, this paper proposes an advanced algorithm in the basis of optimum scale and a new peak-searching method.
实验室测试表明，该软件能实时显示输出图像并进行相应的处理，调制度计算结果准确，软件运行稳定。
Lab tests show that the software can display and process the output images in real-time. The calculated modulations are accurate and the software operates stably.
实验室测试表明，该软件能实时显示输出图像并进行相应的处理，调制度计算结果准确，软件运行稳定。
Lab tests show that the software can display and process the output images in real-time. The calculated modulations are accurate and the software operates stably.
应用推荐