对于这些模式，本文分析了它们的适用范围、解决方式、优势并给出流程图。
So as to these patterns, this paper makes analysis about their advantages, scope of application, solution and flow chart.
文中系统地介绍了轴承产品计算机设计的全过程，并给出了CAD系统工作流程图和程序框图。
In the paper, the whole process of bearing product CAD is systematically introduced, and the working flowchart and program chart of CAD system are given.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
文中叙述了该系统的硬件设计及软件流程图，并给出了实测结果。
This paper also describes the hardware design and the software flow chart and the on-the-spot survey result is given.
本文先对系统总体设计进行介绍，然后重点分析了其中几个模块，并给出了数据结构、函数接口、数据流程图等实现过程。
This dissertation introduces the system design first, and then focuses on an analysis of several modules, and given the data structures, function interfaces, data flows and the realization processes.
同时，分析了如何通过运营模拟，对布局方案的合理性进行比较用以指导规划，并给出了模拟流程图。
Meanwhile, how to compare the rationality of plans through operation simulation to guide planning is analyzed, and the simulation flow charts are given.
最后按照无线资源管理层rrc中的“SYSTEMINFORMATION”消息的层次结构，具体解析了各信息单元的含义，给出了解码流程图，并详细描述了其工作原理和过程。
Last, we analyze the information element's meaning and function in the "SYSTEM information" message of RRC layer, give the decoding flow chart, and describe the working principle and process.
并给出了电路原理框图及程序流程图。
And given the schematic circuit diagram and program flow chart.
最后，对软件系统进行设计，完成了功能模块划分并给出了主程序流程图。
Finally, the thesis designs software system, gives the partition of software functional modules and the flow chart of main program.
介绍了基于RS-485总线的单片机多机通信系统，重点介绍了MAX-487芯片和通信系统的组成，并给出了流程图。
The essay introduces multi-chip calculator communication system based on RS-485 bus, especially MAX-487 chip and the components of the communication system and gives the flow diagram.
开发了通用MS CAN模块驱动程序，阐述了驱动程序文件组成、主要数据结构和功能函数，并给出了主要函数程序流程图。
Developed MSCAN module driver, explained structure of the key data and main functions in detail. The procedure flow charts of main functions are provided.
并给出了优化流程图。
提出一种用于煤矿生产安全监测监控系统中数字传输差错控制的编码方法，并给出实用程序流程图。
The paper presents a coding method need for digital transmission fault control in coal mine production and safety monitoring system, and also gives a flow chart of practical program.
在介绍染色工艺特点的基础上，详细阐述了模糊pid控制推理系统设计的过程，并给出了软件设计流程图。
On the basis of introducing the technology characteristic of dyeing, the process of designing a fuzzy PID control logic system is related in detail and the flow chart of software is given.
然后对主控机使用的虚拟仪器进行需求分析，对其软件要求进行分析并给出软件流程图。
And then, analyzing the requirement of the virtual instrument on the master station, and the requirement of the software, and giving the flow chart of the software.
同时根据实时性的要求及模拟量输出板的功能特点，对其软件设计做了详细的讨论，并给出了程序流程图。
To satisfy real-time processing and features of AO board, we made a particular argumentation in software design, the flow chart of the program has been listed.
结合航星计程仪的原理图，文章分析了系统原理并给出了软件流程图。
The system principle is analysed from the log principle figure, the software flow chart is also plotted.
并给出了该控制系统的软件流程图。
给出了系统的硬件结构框图和程序设计流程图，并讨论了DSP软件设计和调试中的一些问题。
The hardware architecture and the software flow chart are offered, and then some problems of the designing and debugging DSP programs are discussed.
本文介绍了迈尔兹竖窑煤粉计量阀转速的控制原理，并给出了其程序流程图。
This paper introduces the revolution control principle of powdered coal metering valve for MAERZ vertical kiln and its program flow chart.
文中研究了一种基于DSP的永磁同步直线电机直接推力控制策略，并给出了该系统的硬件结构和程序流程图。
This paper applied direct torque control (DTC) tactics base on DSP to permanent magnet synchronous linear motor, gived the hardware structure and the software diagram of the system.
本文详细阐述了一汽汽车销售预测系统的系统分析、系统设计与系统实施过程，并给出了清晰的系统结构流程图。
This paper is mainly concerned about the system analysis, design and implementation process of automobile marketing prediction system in FAW. Plain flow chart of system architecture is also shown.
并介绍了其软、硬件设计的方法和给出了系统的硬件原理图、软件流程图。
And introduced its software and hardware design methods and the system is the principle of hardware, software flow chart.
然后根据工作流程图，对各个工作环节作了详细的描述，并给出了相应的操作程序。
Then the basis of the flow chart of the various aspects of the detailed description, and gives the corresponding procedures.
最后介绍了一种基于MSP430单片机的红外遥控器的设计方案，并给出了硬件电路和程序流程图。
At last, it presents a design of infrared controller based on MCU MSP430, and gives hardware circuits and program flow charts.
然后阐述了控制器软件系统设计方案，并给出关键模块子程序流程图或算法描述。
Then the thesis states design decision on controller software system and the flow chart or the calculating description on sub-process of key module.
文中还详细描述了硬件的具体方案选择，并给出了软件的流程图。
In addition, in this paper, the material selection of hardware scheme is described in detail, the flow charts of software are listed also.
针对目前船舶锅炉的现状，采用可编程序控制器(PLC)对船舶锅炉系统进行设计与改进，并给出了系统部分硬件组成和软件流程图。
Aimed at the present condition of the ships boiler, it designs and improves control system of shipping boiler by using PLC, and gives the structure of hardware and the program of the system.
介绍了基于AT 89C51和TMS320F206的馈线远方终端的基本结构，详细给出了采用IDT7130作为双处理器接口的具体电路以及F206与MAX125的接口电路，并给出了关键部分的流程图。
Introduces the architecture of FTU based on AT89C51 and TMS320F206, presents the interface circuit of IDT7130 and dual processor as well as that of F206 and MAX125, illustrates the key flow chart.
介绍了基于AT 89C51和TMS320F206的馈线远方终端的基本结构，详细给出了采用IDT7130作为双处理器接口的具体电路以及F206与MAX125的接口电路，并给出了关键部分的流程图。
Introduces the architecture of FTU based on AT89C51 and TMS320F206, presents the interface circuit of IDT7130 and dual processor as well as that of F206 and MAX125, illustrates the key flow chart.
应用推荐