本文介绍了油气储运系统的特点,并根据其特点提出了一些地震对策。
This paper gives an account of the characteristics of the systems and on the basis of such characteristics, some countermeasures against earthquakes are put forward.
为了提高配送效率,研究了供应链节点间配送线路的特点,并根据其特点建立数学模型。
In order to improve distributing efficiency, the feature of distribution routing for supply chain depot was studied.
并根据其特点讨论了近义词连用形式在语言表达上有完整语义、强调词义、协调语句等功能。
According to these characteristics, the chapter discusses functions of the synonym combination in language useage, which include completing semantemes, emphasizing meanings and harmonizing sentences.
本文对国内外关于教育成本的相关理论进行了归纳总结和分析,在此基础上对我国教育成本进行概括,并根据其特点进行分类。
The paper summarizes and analyses the related domestic and foreign theories of education cost, then summarizes the characters and species of education cost in our country.
讨论了应用其D-S合成规则进行预报的一般过程,并根据地震综合预报的特点,提出了加权的D-S规则。
Then the general procedure of prediction with the D-S combination rule is discussed, and in accordance with the earthquake synthesizing prediction need, the weighted D-S rule is produced.
首先,根据移动式起重机的结构特点,对其运动进行了分析,并给出了移动式起重机的关键参数的计算。
Firstly, according to the general structural characteristics of mobile crane, we analyze its movement and compute the key parameters for mobile crane.
然后根据神经计算部件与传统数字处理部件在系统中的地位与相互关系的不同,将NNC系统划分成三类结构,并简述其特点。
The NNC systems are classified into three structures according to what the Neural Computing Units and traditional Digital Processign Unit act in them, their features are also briefly discussed.
其中车辆调度监控管理系统是根据其特点和需求来开发的,并设计出与之相适应的车辆调度监控管理系统软件。
The development for the system of coordinating, monitoring and administrating vehicles is based on its characteristics and requirements, and the software that is suitable for it is also developed out.
通过对弯曲件弯曲变形的观察分析,并根据其变形的特点,将被弯曲板料分为变形区、过渡区和非变形区三个区域。
Through bending analysis of bending parts, according to bending characteristic, the bending parts were classified into deforming area, transition area and un-deforming area.
并根据偏心误差模型的特点,对其进行简化,得到易于数学计算的偏心误差修正模型。
Then the model was simplified considering its characteristics, and a modified error correction model was obtained which was less complex in calculation.
针对厚板精冲过程中的各种问题,根据其工艺特点,建立了精冲计算力学模型,并分析了厚板精冲过程的力学状态。
Aimed at the problems of thick plate fine blanking process, a computational mechanics model based on its characteristic was established to analyze the mechanical state of the process.
同时根据实时性的要求及模拟量输出板的功能特点,对其软件设计做了详细的讨论,并给出了程序流程图。
To satisfy real-time processing and features of AO board, we made a particular argumentation in software design, the flow chart of the program has been listed.
并根据其互动性、定制化、完整性、实时性等特点对手机视频业务进行了分类。
This paper also gives classification method of mobile video service based on interaction, customization, integrality and real time traits.
本文根据稀土元素的原子结构特点,探讨其在陶瓷颜料中的成色机理。并指出研究稀土陶瓷颜料组成结构和发色机理的重要性。
The colouring mechanism of re in ceramic pigments was discussed on the basis of their atomic structures. The importance of studying the composition and chromatic mechanism was showed.
根据机载布撒器的工作特点,设计了一种满足其作战要求的具有末端角度约束的制导律,并分析了工程实用性。
According to the performance of airborne dispenser, a guidance law with angle constraint which meets the requirements of it is designed, and its project feasibility is analyzed.
本文对福建省沿海第四系分层进一步厘定,并根据其分布特点,拟定评价两地第四纪差异活动的标准。
This paper have subdivided the Quaternary sequences in coastal Fujian once again and based on it's distribution proposed a standard model for determination of Quaternary fault.
本文根据当前信息技术课堂的特点,分析了游戏式CAI所应具有的属性,归纳其主要特征并对其进行了详细描述。
According to the characteristic of current information technology class, this paper analyzes several attributes of game CAI, generalizes its main characteristic and describes them in detail.
根据近年来瓦斯气柜多次发生泄漏事故,分析其腐蚀特点并采取有效措施加以防护。
The corrosion characteristics of gas holder were analyzed based upon a number of leakage emergencies in recent years and effective protection measures have been taken.
最后我们还根据非多重边LDPC码性能曲线,分析其特点以及影响译码性能的参数,并通过仿真进行验证。
Finally we investigate different construnction parameters which influence the performance of the non-multi-edge LDPC codes and a simulation is given to validate.
根据其信号特点,对其测试的关键部分进行了探讨,并给出了测试结果。
According its signal peculiarity, the most important part of its test system is discussed and the result of test is given.
根据引黄涵闸工程的特点,提出其老化的概念,并建立了评价指标体系。
According to the characteristics of culverts and sluice gates in the Yellow River, the paper puts forward concept of ageing and sets up a system of evaluation indexes.
根据光栅透镜的线宽和间距微小渐变的特点,建立了光栅透镜的物理模型,并利用严格模式理论对其衍射特性进行分析。
Rigorous modal theory is used for analyzing their diffractive properties in sequence, and finally total diffractive efficiency of grating lenses can be easily obtained.
最后,根据WICS系统的特点、仿真情况等提出了其对应的硬件实现方案,并对其关键单元及整个系统的工作流程加以描述。
Last, we introduce the hardware solution of WICS according to its features, functions and simulation results, and explain the key function units and the process of signal processing in the system.
根据ICAI中知识的特点,通过分析知识点之间的关系,本文提出了知识结构与或图的知识表示框架,并引入知识组件来降低结构的复杂度并对其进行形式化研究。
According to the characteristics of the ICAI knowledge, the concept of knowledge structure AND/OR graph is presented by researching the two main relationships among knowledge points.
根据PAN基碳纤维生产的特点,设计了一种新型流态化预氧化炉,并对其关键部件的特点与作用以及流态化粒子的选择作了系统描述。
A new type of fluidized preoxidation furnace was designed in this paper based on characteristics of PAN base carbon fiber production process.
根据其特点并结合试验,对其流动性、流动性维持能力等性能及其注浆堵水机理进行了研究。
According to its properties and experiments made, this paper has done an intensive study on its flowability, its maintaining ability of flowability and its mechanism of water blocking as well.
本文主要针对其运动控制部分的结构特点,分析了影响运动性能的主要原因,并根据要求设计出调速方案。
The paper analyses the main reasons influencing motion qualities, while according to the features of the movement system this paper designs the plan of the motors shift gears and…
本文以高度城市化地区的公路网络为主要研究对象,讨论其布局方法,并根据高度城市化地区特点,结合城市道路系统规划方法,提出了新的公路网络布局方法。
Based on the characteristics of high urbanization area, and combine the method of system layout in city road, a new method of highway network layout is put forward.
本文以高度城市化地区的公路网络为主要研究对象,讨论其布局方法,并根据高度城市化地区特点,结合城市道路系统规划方法,提出了新的公路网络布局方法。
Based on the characteristics of high urbanization area, and combine the method of system layout in city road, a new method of highway network layout is put forward.
应用推荐