设计的过程，就是对需求进行分析并提出解决方法的过程。
The process of design is the process of analyzing demands and providing solutions.
本文还阐述了由于振动导致的螺栓断裂问题，并提出解决方法，供大家参考。
This paper also expounds the bolt fracture caused by vibration problems, and propose solutions, for your reference.
本文针对我国零部件行业与国外行业比较，探讨我国行业问题并提出解决方法。
This article will discuss our country profession question and propose the solution, based on our country spare part profession and the overseas profession.
对家庭护理的概念、国内外开展家庭护理的现状和存在的问题进行了综述，并提出解决方法。
It introduced the concept of home care, the status quo and problems existing in home care both at home and in abroad. And it put forward some methods of solving.
通过检验案例介绍，分析了带保温压力容器产生外腐蚀的原因，并提出解决方法及预防措施。
Through a review of actual inspection cases the cause of external corrosion of thermal insulated pressure vessels is analyzed and some methods and measures for corrosion prevention are presented.
针对住宅给排水工程中水泵机组、水箱、排水管等产生的噪声问题进行了探讨，并提出解决方法。
The noises from the water pump and water tank and drainpipe of the whole water supply and sewerage works in dwelling house are discussed; the controlling measures are pointed out.
进行了直流无刷电动机控制系统的软、硬件调试，同时对调试过程中碰到的题目进行分析和阐述，并提出解决方法。
Carry out the debugging of a brushless DC motor control system hardware and software, meanwhile analyse and explain problems they encounter, at last putting up with solutions.
本文从以下几个方面对中国地产市场进行了相关分析，并提出了自己的结论和解决方法。
This paper analyses the real real market in China in the aspects as follows and bring forward the conclusion and settlement.
最后一个章节简单介绍了一下功能测试并列举了一些常见问题，并提出了解决方法。
The last chapter simply introduces function test, specializes some common problems and bring forward the resolvents.
DSP与PC机的通讯以RS-485为基础，分析了RS-485总线在组网过程中因地线的不正确连接引发的共模干扰和EMI问题，并提出了解决方法。
The problem in the communication between DSP and PC based on RS-485 is presented, and the solution of common-mode disturbance and EMI which are generated by incorrect ground connection is stated.
介绍了大直径滑轮坯的轧制工艺，分析了轧制过程中存在的问题，并提出了解决方法。
The rolling technics of the big diameter sheave are introduced, the problems in rolling are analyzed, the methods for solving the problems are put forward.
本文介绍了一次烧水晶釉墙地砖的一些常见缺陷，并提出相应的解决方法。
This paper introduces one-firing crystalline glaze wall or floor tile some common defects, and proposes solving methods accordingly.
简单介绍了大直径滑轮坯的轧制工艺，分析了轧制过程中存在的问题，并提出了解决方法。
The rolling technics of the big diameter sheave are introduced and the problems in rolling are analyzed, and the methods for solving the problems are put forward.
文章分析了造成部分用户供暖系统不热的原因，并提出了相应的解决方法。
This paper analyzes the reasons of the athermal phenomenon in some users' heating system, and puts forward some corresponding solving methods.
本文作者详细介绍了如何凭汽车尾气冒烟的颜色来判断汽车故障，并提出了解决方法。
The author introduces how to judge vehicle failure by the tail gas color and puts forward solving method.
本文详细分析了组合电路中延时错误产生的原因，并提出了三种解决方法。
This paper shows that why can delays appear and puts forward three kinds of methods to solve delay errors.
两个半世纪后，约翰罗尔斯也在担心同样的问题，并提出了完全不同的解决方法。
John Rawls, who worried about the same problem, prescribed a different cure two-and-a-half centuries later.
介绍了用手工及半浸机组生产镀锌管经常出现的质量问题及产生这些问题的原因，并提出了相应的解决方法。
The common quality problems of galvanized tube produced by hand and half-submersion sets and the cause concerned are introduced, and the related resolution method is put forward.
介绍了网络对现代图书馆管理的影响，阐述了图书馆工作面临的新情况，并提出了解决方法。
This paper introduces the influences of network on the library management, expounds the new situation faced by the library work, and advances some solving methods.
分析其产生的原因，并提出了解决方法。
对在使用鞋面革过程中经常遇到的涂饰问题进行了总结，分析其产生的原因，并提出了解决方法。
On the basis of summarizing on the finishing problems of using shoe upper, the cause was analyzed, the solution was put forward.
分析了漆膜起皱的原因并提出了解决方法。
Causes for shriveling of painting film and its solution were presented.
本文对检验设备在日常工作中的定标和质量控制发生错误或定标质控超出范围的原因进行了总结和分析，并提出了解决方法。
Summarizes and analyzes the causes of error inspection, the calibration beyond the scope and the uncontrollable quality for the lobora tory machine, and puts forward some solutions.
探讨了镀镍层常见缺陷的原因并提出了解决方法。
Causes for defective nickel deposits were discussed and solutions were presented.
对在实施松面革干填充过程中常遇到的问题进行了论述。分析其产生的原因，并提出了解决方法。
The question in process of loose upper leather dry filling were described. The cause was analyzed, and solutions were put forward.
本文论述了直剪试验的方法及在直剪试验中常见问题，并提出相应的解决方法。
This paper states straight shear test and common problems in test. It also puts forward relevant solving method.
对大模板施工中存在的接缝处混凝土质量问题进行了原因分析，并提出了解决方法。
The causes of quality problems existed in concrete of joint during big framework construction were analyzed and the methods of settlement were proposed.
基于工程实践和理论分析，研究了这些问题产生的原因并提出了相应的解决方法。
Based on engineering practice and theoretical analysis, the causes of these problems have been studied and the corresponding solutions have been introduced.
基于工程实践和理论分析，研究了这些问题产生的原因并提出了相应的解决方法。
Based on engineering practice and theoretical analysis, the causes of these problems have been studied and the corresponding solutions have been introduced.
应用推荐