并对聚合物的结构及聚合反应的类型进行了探讨。
The structure and polymerization reaction type of the polymer were also discussed.
本文合成了三种席夫碱聚合物，并对聚合物进行了相应的表征。
In this paper, we report preparation and characterization of three kinds of Schiff base polymers.
同时制备了丙烯酸高碳醇酯的聚合物，并对聚合物的降凝性能进行了探讨。
In addition, the higher alcohol acrylate polymer was prepared, the pour point depression performance of the polymer was investigated.
对超高分子聚合物理化性能的准确评价有利于对不同聚合物进一步优选并指导其注入参数的优化。
Accurate evaluation on physicochemical property of high molecular weigh polymer is favorable for further optimization of different polymers and for guidance of injection parameters.
亦讨论了其他反应参数的影响，并研究了此聚合物的吸水率，对牛血清白蛋白的粘附及血液相容悱。
The influences of other reaction parameters were discussed. Water absorption, adhesion of bovine serum albumin and blood compatibility of of the polymer was studied.
本文详细介绍了主链上含有2,4 -喹啉单元的芳烃聚合物的合成方法，并对其溶解性进行了研究。
In this paper, the synthesis and solution properties of aromatic polymers containing 2, 4-quinoline units in the main chain have been studied.
简单介绍了机敏材料的基本概念和主要用途，并对各种聚合物凝胶进行了系统的评述。
The concept and the main USES of smart materials are introduced, and all kinds of polymer gel are systematically described.
介绍了聚合物水泥防水涂料的成膜机理和防水机理，并对其具有不同延伸性能的两大类产品作了简要说明。
The film-forming and waterproofing mechanism of Polymer cement waterproof coating is described. Two sorts of products of its kind with different elongation property are also described.
简单介绍了消光机理、消光剂的定义及分类，并对无机消光剂和聚合物消光剂进行了比较。
Flatting mechanism, definition and classification of flatting agent were introduced briefly. The paper made an comparison between inorganic and polymeric flatting agent.
文章综述了测量非线性光学(nlo)聚合物薄膜材料光波导传输损耗的三种新方法及原理，分别给出了典型的实验装置结构图，并对它们的特点进行了比较。
The principles of the common methods to measurement the propagation loss of the NLO polymer film optical waveguide are summarized, and the typical experimental arrangements are presented.
本文介绍的是一种以高分子聚合物为主体材料的新型湿敏电阻元件，并对其工作原理、特点、技术参数、应用电路及制作方法作了具体阐述。
A new type humidity sensitive resistor of which main material is high-polymer film is presented in details by its principle of operation, performance, applied circuit and manufacture process.
并对其结构进行了表征。采用DSC和偏光显微镜方法研究了聚合物的液晶行为。
The liquid crystalline behavior of the polymers was studied by DSC and polarized optical microscopy.
目的构建以乳铁蛋白作为靶向功能基、可生物降解聚合物泡囊为载体的脑靶向递药系统，并对其脑部递药特性作出药效学评价。
OBJECTIVE to prepare a novel brain targeting system, lactoferrin conjugated self-assembled polymer vesicles (Lf-PVs), which the brain delivery property had been evaluated in vivo.
本文简要介绍了用作沥青改性的聚合物的种类，并对典型改性高聚物sbs、APP和APAO的改性机理及改性防水卷材的特性进行了简要分析。
Kinds of polymers for modifying asphalt are introduced in this paper, mechanism of typical superpolymers SBS, APP, APAO and performance of the waterproof coiled material are analyzed also.
对多孔聚合物微球的制备方法和成孔机理进行了分析，并对孔结构的影响因素进行了说明。
This paper deals with the methods of preparing multihollow polymer particles and the mechanism of porous formation with explanations made to the factors that influence the porous structure.
并对该聚合物的结构进行了表征。
对各类聚合物列举了合成实例，并简要介绍了聚合物的介电常数和热性能。
The examples of synthesis were enumerated of all kinds of polymer, the dielectric constant and thermal property of product is introduced.
本文合成了三种耐温抗盐性质良好的聚丙烯酰胺类聚合物，并对其水溶液的性质进行了评价。
In this paper, through molecular design, synthesis of three polyacrylamide polymers which have good temperature and salt resistance properties, and the property of its solution have been evaluated.
综述了聚合物固体电解质基体的设计原理、分类和研究进展，并对今后在聚合物基体设计方面的研究前景作了展望。
The design principle, the categories and the development of the solid polymer electrolyte matrix are reviewed here. And the study trends of the design polymer matrix are also prospected.
评述了分子印迹原理、分子印迹聚合物微球的制备技术以及一些制备新方法，并对其应用领域作了较为详细地介绍。
The article review molecular imprinting theory, preparation technique of molecular imprinting polymers, and its new preparative ways and introduces its applications in detail.
目的：制备新型高延展性聚合物水分散体，用于延展性缓释包衣，并对其理化性质和缓释包衣性能进行研究。
Aim: To prepare novel aqueous polymer dispersions with high flexibility for sustained-release coating and investigate their properties.
为了调查聚合物在冲击波作用下的结构变化，对HDPE受冲击样品进行回收，并分析了其晶体结构和熔融过程。
In this paper, shock pressed HDPE samples was retrieved and investigated to reveal the effect of shock wave on its crystalline structure and melting process.
本文总结了不同类型的表面活性剂和聚合物之间相互作用的不同研究方法，并对其测定机理进行了论述。
The method of the interaction of some typical kinds of surfactant-polymer have been summarized. And the determine mechanism has also been discussed.
综述了锂离子电池聚合物电解质的导电模型，并介绍了近年来对聚合物导电机理的研究。
The ion conducting models for polymer electrolytes are illustrated. Additionally, the recent research progresses in polymer electrolytes for lithium ion batteries are introduced.
并研究了溶剂与聚合物的相容性，以及溶剂的挥发性对蜂窝状孔结构形成的影响。
Moreover, the influence of the compatibility between PPO and Solvents, as well as the volatility of solvents on the pattern regularity was also investigated.
介绍一些聚合物等作为微反应器在有机合成中的应用，并对其特征进行了评述。
Several kinds of microreactors resulted from polymers and their applications in organic reactions were reviewed.
对所需的单体、聚合物等进行了合成，并对合成聚合物的基本物化性能及其用于光敏成像体系的成像性能进行较系统的研究。
Monomers and polymers in need were synthesized, and chemical and physical properties of these polymers and imaging performance of the photo-sensitive imaging system were investigated.
通过1H NMR和IR对单体和聚合物的结构进行了表征，并证实了聚合物的硅氢化程度近于完全。
The chemical structure of the monomer and the polymer was confirmed by 1H-NMR and IR measurements and the full hydrosilation reaction of the polymer was confirmed.
通过1H NMR和IR对单体和聚合物的结构进行了表征，并证实了聚合物的硅氢化程度近于完全。
The chemical structure of the monomer and the polymer was confirmed by 1H-NMR and IR measurements and the full hydrosilation reaction of the polymer was confirmed.
应用推荐