介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。
The method of using technic analysis software to solve the technic problems of the assembly line was introduced, it develops a new application field for technic analysis software.
基于对引信设计的可生产性考虑，开发了工艺与成本分析软件。
The process and cost analysis software is designed for producibility of fuzes .
本文通过对啤酒生产糖化过程的工艺及关键问题的分析，从硬件、软件两个方面对啤酒生产过程中啤酒糖化自动控制系统进行设计。
This paper designs the Beer Saccharification Processing Autocontrol System in hardware and software through analyzing the technics and crucial problem in the Beer Saccharification Process.
基于对引信设计的可生产性考虑 ，开发了工艺与成本分析软件 。
The process and cost analysis software is designed for producibility of fuzes.
本文是利用有限元软件- ANSYS对大庆石化公司化肥厂合成氨工艺中液氨储罐进行应力分析。
This text is to make use of a software - ANSYS to the fertilizer factory to make stress analysis of technique of liquid ammonia tank.
分析了棒村连轧生产中易出现的问题，开发了核材连轧轧制模拟软件系统，为实际生产中的工艺控制提供了依据。
The often happened problems during continuous rolling for bar are analyzed. A software system of computer simulation is developed. It has provided the scientific basis for production.
在所研究理论模型及工艺流程分析的基础上，开发了动力压井工艺参数设计软件，并进行了实例验证。
Based on the research and analysis of the theoretical model and construction process, it developed dynamic kill software, and the example is verified.
本文采用三维刚粘塑性软件TFORM3对12V240曲轴RR法限制成形工艺及模具结构进行了设计分析。
The RR process of the 12V240 crankshaft and die structure are designed and studied using the TFORM3 software of 3D rigid plastic FEM.
应用该软件分析了高温合金(GH4169)螺栓镦挤工艺的动态再结晶过程和再结晶的晶粒度分布。
The dynamic recrystallization and recrystallized grain sizes of heading for high-temperature alloy (GH4169) bolt are simulated with this software.
采用有限元软件方法，分析了常用的电除尘器振打锤的结构型式、材质工艺、弹性模量等对其振打加速度大小及分布规律的影响。
Analyze the influence of acceleration of EP and the distribution of acceleration, generating by common vibrating strike hammer's types, qualities and material's elastic modulus, by using the FEM.
在分析了国内第一套水煤浆加压气化制氨工艺对DCS要求的基础上，提出DCS硬件与软件的配置原则。
Based on analyzing the demands to DCS of the first unit for producing ammonia by coal slurry gasification inland, the principles for disposing hardware and software of DCS were put forward.
利用DEFORM软件，对工作缸收孔工艺进行了数值模拟，并对模拟结果进行了分析。
Using software DEFORM, the hole - shrinking process of cylinder was simulated, the simulation results was analyzed.
通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。
An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.
本设计对肥皂盒进行的注塑模设计，利用Mcam软件对塑件进行了实体造型，对塑件结构进行了工艺分析。
The design of injection mould for soap box Mcam software design, use of plastic parts of the entity model, plastic process analysis.
本文分析了钢包炉外精炼喂丝工艺的控制要求，介绍了一个喂丝机计算机控制系统及其硬、软件配置。
The article analyzes the control requirements of wire feed "process for ladle refining, introduces a computer control system of wire feed apparatus and its hardware and software."
本文是在分析热处理车间设备—渗碳炉与工艺现状的基础上，提出了对渗碳工艺实现自动控制的硬件系统与软件系统的总框架。
This paper put forward a total frame of software and hardware of auto-control that is applied in heat-treatment technology of carbon potential furnace.
采用DEFORM软件对摩托车带爪齿轮坯进行了温精锻成形工艺数值模拟分析。
In this paper, the precise warm forging for finger gear blank of motorbike is numerically simulated using software DEFORM.
软件在集输管网、站内流程工艺计算的基础上，可对集输系统的用能状况进行评价，并给出不同技改方案的技术比较及敏感性分析。
With it the energy utilization level of the gathering system can be evaluated on the basis of calculation of the gathering pipe network and flow technology in station.
介绍了上述研究成果在大锻件工艺设计中的应用以及编制的数值分析软件。
Application of the research results above to the design of heavy forging processes, and softwares developed by the authors were also introduced.
首先分析了系统的生产工艺，指出了控制系统的主要设备和功能，并着重叙述了硬件、软件的设计。
The technology of the system is analyzed. The main equipment and function of the system are pointed out . The hardware and software design is finally emphatically described.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
为了解气流的实际运动情况，借助基于有限元分析的计算机软件对纺粘法非织造布生产中的工艺性气流进行探讨。
In order to understand the actual movement state, the process airflow in spunbond is studied by dint of computer software based on finite element analysis.
CAE技术近年来在塑料注射成型工艺方面得到广泛应用，目前广泛采用的注塑成型分析软件是MOLDFLOW公司开发的MPI系列软件。
MPI software developed by MOLDFLOW Company is a kind of plastic injection molding analysis CAE software. It is widely used around the world currently.
依据现场施工油井的效果分析评价及反馈信息，又可对双管采油工艺技术的理论机理及优化决策软件进行优化与完善。
Meanwhile, the analysis and evaluation of effects and feedback from oil Wells of practical construction, can also optimize and improve the theory mechanism and optimization software.
根据计算机控制磁流变抛光的去除机理，分析了抛光工艺软件的去除算法核心问题即求解驻留时间函数和加工路径设计。
Based on the mechanism of magnetorheological finishing by computer control for optical surface, the core issues of process software are calculating dwell function and designing of machining path.
利用三维弹塑性有限元软件L S- DY NA对一种典型偏心轴类零件楔横轧成形进行了数值模拟，分析了其成形过程、应力应变场分布及工艺特点。
The cross wedge rolling deformation process of shaft parts with eccentric section was simulated with three-dimension finite element soft LS-DYNA by using elastic-plastic finite element method.
论述了汽车前轴辊锻模膛三维造型的方法及采用UG软件形成数控加工程序的方法，并对前轴辊锻模膛的加工工艺进行了分析。
The 3d styling method of die impression of automotive front axle and the method for generating numerically controlled machining program with UG are discussed.
论述了汽车前轴辊锻模膛三维造型的方法及采用UG软件形成数控加工程序的方法，并对前轴辊锻模膛的加工工艺进行了分析。
The 3d styling method of die impression of automotive front axle and the method for generating numerically controlled machining program with UG are discussed.
应用推荐