接着分析了超声波电动机的工作原理和定子表面质点椭圆运动的形成机理。
Then how USM works and how the ellipse trace of particle on the surface of stator forms are analyzed.
本文在分析进口锯石机工作原理和工况条件的基础上,根据磨料磨损机理,提出了适于进口锯石机的新型石材锯切砂的选材依据;
This paper proposed the criteria to select qualified abrasives for imported granite—cutting machines on the bases of abrasive wear mechanisms and the working principle and conditions of the machines.
简要介绍了等离子点火机理和等离子发生器工作原理。
Briefly introduced the plasma ignition mechanism, the plasma generator principle of work.
对起爆器销钉的受力作用进行了分析,介绍了复合式缓冲器的设计原理、工作机理、加工工艺以及实际应用。
The force applied on blaster pin is analyzed and the design principle of composite buffer, its working mechanism, machining process and its application are introduced.
研究了产生超声波的机理及器件性能,分析了超声源驱动电路的组成和工作原理。
Studied the mechanism of how to produce ultrasonic and the functions of the machine, analyzed the ultrasonic driven circuit and its principle of working.
文章了阐述其工作原理、自吸机理及水力设计方法。
The paper expounds the working principle, self priming process and hydraulic design as well.
利用压电材料的压电效应机理,设计出一种压电主控作动杆件,分析其工作原理和设计方法。
Using the mechanism of the piezoelectric effect of piezoelectric materials to design a piezoelectric actuator bar master, and analyze its working principle and design method.
在阐述被动式加载系统工作原理的基础上,介绍了多余力的产生机理。
Based on the operating principle oft he passive loading system, the paper introduces the generating mechanism of the surplus torque.
文章以减速机工作原理为基础,研究了减速机振动信号产生的机理、减速机故障的形式,以及由于故障的不同引起的不同形式的振动,从减速机外部振动信号中获取故障特征信息,有效地实现了减速机的故障诊断。
Based on the work principle of the speed reducer, the paper studies the produced mechanism of the vibration signal, the fault forms and the different type of vibration caused by the faults.
论述了单孔复合锚固法的基本原理、工作机理和工程实践。
This paper describes the basic principles, working mechanism and practice of the single bore multiple anchor method.
介绍了砂过滤的工作原理和过滤机理,建立了一套砂过滤模拟实验装置。
The working principles and filtering mechanism of sand filtration are introduced. A set of experimental installation for sand filtration simulation was established.
就旋风分离器的结构、工作原理、磨损产生的机理与防磨措施问题展开讨论。
Discussions are conducted to the structure, working principle, causes for abrasion and the prevention measures.
概述了梳理机工作机理,分析讨论影响非织造布梳理机纤网质量的主要因素及原理。
This paper introduced the mechanism of the carding machine and discuss the main factors affecting the web quality.
介绍了该装置的结构原理,分析了其工作机理,并对主要参数进行了优化,给出了优化结果。
The paper introduces structural concept of the device, analyzes its operating principle, optimizes major parameters and provides optimum results.
介绍了电缆型温度探测器的工作原理,分析了损坏性的和漂移性的失效机理,并举例介绍了寿命试验。
The principle of cable-type temperature detector is introduced. The fault mechanism of the device is analysed. A bodily example of life testing is given also.
本文研究了四桥臂逆变器的工作原理,分析了它能抑制不平衡负载的机理。
The principles of four legs inverter about how to work and how to restrain the unbalanced load are studied in this dissertation.
介绍泵直接传动的锻造液压机工作原理,对其控制机理、数学模型、控制策略进行了研究,并成功地应用于生产实践中。
The principle of forging hydraulic press by pump direct drive is introduced in this paper, the math model, control method and strategy are also described.
在分析恒压防滴阀系统的工作方式和工作原理的基础上,研究了恒压防滴阀系统恒压的机理,并建立数学模型进行定量讨论和分析。
This paper analyzed the working manner and principle of unvarying pressure anti-dripping valve, studied unvarying pressure mechanism, established mathematic model for quantitative analysis.
本文介绍了ZGPY - 1型在线近红外辛烷值分析仪的分析机理、结构及工作原理。
This paper introduces the structure and principle of operation of ZGPY-1 on-line NIR octane rating analyzer.
本文分析了半导体激光器的工作原理、使用要求及损坏机理。
This paper described the operation principle of the semiconductor laser, instructions for use, and the damage mechanism.
简述布袋除尘器特点、过滤机理、工作原理、设计要求。
The characteristics of bag filter and its mechanism of filtration, principle of performance, rule of design are described.
第二章阐述电子回旋脉塞机理和CARM的工作原理,在此基础上论述同轴波导CARM放大器的工作机理及可实现性。
The second chapter expatiates the theory of electron cyclotron maser, the operational principle of CARM, and the practicable of coaxial-waveguide CARM amplifier.
分析了冲击模拟的技术机理和实现途径,最后还对工作原理进行了专门的说明。
The impact guideline is brought forward, and the way of implement is discussed. In the end, the principle is particularly expatiated.
根据预压桩托换法的工艺特点,通过桩—土相互作用的工作原理分析,得出预压桩托换中桩体回弹的工作机理。
According to the technical characteristics of preloading piles, by analyzing the mechanism of interaction of piles and soil, the mechanism of rebound of piles in the course of underpinning was gained.
根据预压桩托换法的工艺特点,通过桩—土相互作用的工作原理分析,得出预压桩托换中桩体回弹的工作机理。
According to the technical characteristics of preloading piles, by analyzing the mechanism of interaction of piles and soil, the mechanism of rebound of piles in the course of underpinning was gained.
应用推荐