定时阀是实现高容积效率的一个主要因素。
Valve timing is a major factor in achieving good volumetric efficiency.
用容积法计算油气储量时，影响储量计算精度的因素之一是储层有效厚度。
When calculating oil and gas reserves by volumetric method, one factor affecting the computing accuracy is reservoir effective thickness.
结果表明：影响海泡石吸湿性能的主要因素是其比表面积、孔容积和孔径分布。
The results show that the surface area, pore volume and pore distribution are the main factors for water vapor adsorption properties of sepiolite.
论文综合了还原罐的容积，产生镁的反应速率和生成镁的量等因素，计算了镁和钠的结晶位置。
Paper combined such factors as the volume of retort, the reaction rate and the mass of produced magnesium, and calculated the crystal location of magnesium and sodium.
系统地分析了容重器的容积测量结果标准不确定度的影响因素，并进行了较详细的评定。
The influential factors of the standard uncertainty are analysized systematically and evaluated in detail to the volume of the volume-weight instrument.
膨胀容积是影响膨胀石墨产品质量的重要因素。
Expanded volume was one of the important factors influencing expanded graphite product quantity.
用容积法计算石油储量时影响储量计算精度的因素之一是储层有效厚度。
Net pay thickness is one of the factors affecting the Precision of volumetric method.
目的探讨缺碘地区学龄儿童甲状腺容积的影响因素。
Objective to study the influence factors influencing thyroid volume in school children in iodine-deficient region.
井口受煤仓的有效容积影响因素很多，计算复杂。
There are many factors influenced to the effective volume of the coal feeding bunker. The calculation is complicated.
首先针对影响吸入容积效率的主要因素，研制了一种高浓度黏稠物料吸入容积效率测试装置。
First according to the main factors affected to the inhaled volume efficiency, an inhaled volume efficiency measurement and test device of high density sticky material was developed.
对于无飞边闭式模锻，由于各种因素的影响，很难使坯料体积与闭式模膛的容积恰好相等。
It's very difficult to make the volume of blank material and bulk of closed cavity equal because of all kinds of influence of factors for no-draft closed-forging.
试验研究了PH值、容积负荷等不同因素对厌氧工艺运行的影响，并得出最佳工艺条件。
Some experiments on varying factors on anaerobic reactor such as PH, COD volume loading and we get the most suitable conditions.
介绍了容积式流量计的特点，探讨了选型的主要因素和应用的注意事项。
The characteristics of positive displacement flow meter are introduced, and the main factors for lectotype and the matters needing attention in the application are discussed.
用传统容积法计算储量时，由于对储层参数采用的是平均值而忽略了储层的非均质因素，影响了储量计算的准确性。
When we calculate reserves with traditional cubature, parameters of reservoir bed we use are average values. This ignores anisotropic factors of reservoirs, so that affects accuracy of calculate.
对直接接触式二元冰蓄冷系统制冰罐内的传热特性进行了研究，对影响制冰罐内容积换热系数的各种影响因素进行了分析，最后对容积换热系数对制冰速率的影响进行了讨论。
Heat transfer characteristic of ice storage tank of direct contact ice slurry system was studied, the influence factor of volumetric heat transfer coefficient in the ice slurry tank was analyzed.
结果表明，空气弹簧气囊外形及材料特性、附加气室容积和节流孔直径是影响空气弹簧性能的主要因素。
The results show that shape of the air cell, properties of the material, volume of the appended gas chamber and diameter of the throttle hole are main factors affecting the dynamics of air springs.
当土壤容积含水量为15 ~ 45%时，校正曲线近似为一直线，其他因素只改变直线的截距或斜率。
When the soil bulk density water content is between 15% to 45%, the calibration curve is approximately a straight line, and the intercept and slope are only influenced by the above factors.
最后在考虑实际因素的基础上，依次设计了时钟产生电路、前置滤波器、带隙基准源、开关电容积分器、锁存比较器和DAC等子模块电路并做了仿真。
The factors which will be encountered are descried and modules include anti-aliasing filter, clock circuit, band gap voltage reference, sc integrator, latched comparator and DAC are designed.
根据测试的流量、压力数据，分析了液压变压器总效率和容积效率的变化规律，并讨论了影响总效率和容积效率的因素。
The total efficiency and volumetric efficiency are analyzed based on the flow rate and pressure measured, and their impact factors are discussed.
主要考察了水力停留时间、温度、COD容积负荷等因素对处理效果的影响，并推荐了运行参数。
Hydraulic remaining time temperature and COD organic loading rate which affect efficiency of the process, were investigated, and parameters are propose4 here.
分析了影响外啮合直齿轮机油泵容积效率的主要因素 ，对油泵齿谷产生空穴和间隙漏损的机理进行了探讨。
Calculation of the geometric size of the modified gear, analysis of the flow characteristics of the outer-engaged gear pump, leakage and gap, radial force are discussed in this paper.
分析了影响外啮合直齿轮机油泵容积效率的主要因素 ，对油泵齿谷产生空穴和间隙漏损的机理进行了探讨。
Calculation of the geometric size of the modified gear, analysis of the flow characteristics of the outer-engaged gear pump, leakage and gap, radial force are discussed in this paper.
应用推荐