在二元试验燃烧室上,研究了四种掺混孔设计方案对燃烧室出口径向温度分布影响。
The exit radial temperature profiles formed by four configurations of dilution hole design have been studied experimentally on a two-dimensional experimental combustor.
有限元分析表明,开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。
The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.
采用有限元法对中压反应釜人孔凸缘结构进行了应力分析,揭示了其应力分布情况。
The stress-distribution about manhole structure of middle-pressure reactor is desicribed by using the methods of finite element analysis.
给出了一种利用有限元技术模拟周期性张力载荷作用下孔边角裂纹扩展过程的方法。
A method is proposed to simulate the fatigue crack growth by finite element technique for corner cracks under cyclic tension loading.
文章利用ANSYS有限元分析软件,对螺旋布孔射孔套管的承载能力进行了分析。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.
介绍了有限元法在深孔钻头扭转计算中的应用。
The application of finite element method in torsion calculating of deep hole drill is introduced.
对有限元和有限差分的数值计算提出了井孔奇点修正和以沟代井列的计算方法,从而提高了离散化网络的计算精度,并可简化取代三维问题为二维。
The method for correction of singular points of wells and the calculation method of well row replaced by a ditch in the numerical FEM and FDM computations were proposed in this paper.
用有限元法对共轭切深孔中轧件的变形进行了计算机模拟,模拟计算结果误差小于1%。
The deformation of rolled piece in conjugate deep cut pass is simulated by finite element method. The error of simulated result is less than 1%.
本文采用有限元法分析了管壁加强开孔椭球壳的应力状况,讨论了壳体温度对于壳体应力和材料强度的影响。
In this paper, the stress state of an ellipsoidal head with pipe reinforcement holes analysed by the finite element method is presented.
本文用边界元法对销钉接触角及销钉孔半径对三种电流输入方式下紧凑拉伸试样的电位函数影响进行了分析。
The boundary element method is used to analyze the influence of pin con - tact Angle and pin-hole radius on the potential function of compact tensile specimen under three current input types.
考虑了冻结孔的实际偏斜状况,提出了基于平面有限元模型的冻结温度场数值反演及模拟方法。
The model is capable of simulating the developing process of freezing temperature field with preferable precision, because it can simulate the.
另外,还采用接触单元对孔轴过盈配合联接组件进行了有限元分析,得到更为精确的强度分布。
Furthermore, the contact finite element was adopted to gain the accurate distribution of strength in the subassembly with the interference between the axle hole and the shaft.
采用有限元法分析了掺铒孔辅助导光光纤的模式特性;
The finite element method is applied for solving the modal field of the EDHALF.
针对方孔翻边问题进行了编程式参数化有限元法研究,其结果与现有文献试验结果基本吻合;
The programming PFEA approach is researched by square hole flanging, and the result accords with the experimental result from publications.
催化裂解催化剂是一个含改性五元环中孔沸石的固体酸催化剂,汽油一次产物在中孔沸石内进行二次裂化转化为轻烯烃。
DCC catalyst consists of a modified mesopore zeolite with pentasil structure for primary product of naphtha range to undergo secondary cracking for producing light olefins.
以工程实践和动力有限元程序分析沟槽深孔微差爆破问题。
The engineering practice and the numerical simulation have been conducted on the millisecond blasting for ditching deep bore hole.
通过增量理论弹塑性有限元计算,对比分析了带和不带加载孔ct试样J积分之间的差异。
The differences of J-integral between CT specimens with and without loading holes have been compared and analyzed by means of incremental theory elastic - plastic finite element calculations.
结合优化技术和边界元分析,针对正交各向异性孔板进行了材料参数的识别。
The present paper deals with the material parameter identification of orthotropic plate with a circular hole by the approach of integrating optimization and boundary element analysis.
采用有限元方法计算了点接式玻璃幕墙在风荷载作用下的应力场,并讨论了孔边应力特性。
The stress fields of bolted glass curtain wall under wind load were studied by means of finite element method and the features of the stress states round holes in bolted glass were discussed.
通道单 元包括位于面对着第一通孔的位置处的凹入部分以及从该凹入部分的内表面突出的突出部分。
The passage unit comprises a concave portion located at a position facing the first through hole, and a protruding portion which protrudes from an inner surface of the concave portion.
第一元件包括形成在该第一元件中的制动销孔。
The first member includes a brake pin aperture formed therein.
记者看到陶币为圆形方孔,灰土色,如现在的一元硬币大小,钱文小篆“五铢”字样清晰可见。
Reporters saw pottery, coins are round hole, lime-soil color, such as the present one dollar coin size, money, Xiao Zhuan "five baht words" clearly visible.
并在ANSYS中选择相适应的单元建立有限元计算模型,对含圆孔的复合材料板进行分析,得到了孔边应力场的数值解,给出孔边应力分布和板的变形。
Moreover, in ANSYS, built finite element model in which proper element types were selected, carried through analysis on composite material plate with round hole.
并在ANSYS中选择相适应的单元建立有限元计算模型,对含圆孔的复合材料板进行分析,得到了孔边应力场的数值解,给出孔边应力分布和板的变形。
Moreover, in ANSYS, built finite element model in which proper element types were selected, carried through analysis on composite material plate with round hole.
应用推荐