本文简要介绍了双相不锈钢的铁素体和奥氏体两相的控制技术及它的耐腐蚀性能。
It simply introduced the content control technique for both ferrite and austenite phase in a duplex stainless steel and its corrosion resistance.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
重点介绍了按金相组织分类的贝氏体、马氏体类合金结构钢和铁素体、马氏体、奥氏体类不锈钢合金焊丝的生产工艺。
It mainly introduces the production processes of alloy structural steel welding wires of bainite and martensite and stainless steel welding wires of ferrite, martensite and austenite.
铁素体基体中氮含量超过0.08%以上(质量分数)或奥氏体基体中氮含量超过0.4%(质量分数)以上的钢称为高氮钢。
The steels contain more than 0.08 % (mass percent) nitrogen in a ferritic matrix or more than 0.4 % (mass percent) nitrogen with an austenitic matrix were defined as high nitrogen steels.
研究证实，双相不锈钢通过成分和热处理的控制，使得铁素体和奥氏体两相比约为1是可能的，同时它具有优良的耐点腐蚀性能、耐应力腐蚀性能和耐冲刷腐蚀能力；
The investigation has proved that the ratio of the ferrite to austenite being approximate to 1 in the steel is possible by controlling its chemical composition and heat treatment condition.
本文就铁素体-奥氏体双相不锈钢的焊接冶金特性和焊接性进行了研究。
The welding metallurgical characteristics and weldability of duplex ferritic-austenitic stainless steels were studied in this paper.
研究了铁素体和奥氏体含铜抗菌不锈钢的抗菌特性及相关机制。
The antibacterial properties and relevant mechanism of copper-containing ferritic and austenitic antibacterial stainless steels have been studied.
T CS铁素体不锈钢采用奥氏体型焊材，实芯焊丝、药芯焊丝和电焊条方法，焊接接头力学性能可以满足使用要求。
With austenitic welding material, solid wire, flux-cored wire and electrode, welded joint mechanical property of TCS ferritic stainless steel all can meet usability.
从组织稳定性角度研究了热处理对26 - 5型铁素体-奥氏体双相不锈钢组织和机械性能的影响。
The influence of various heat treatments on the microstructure and mechanical properties of 26-5 type ferritic-austenitic stainless steels has been studied from the structural stability viewpoint.
以T／P91钢为代表的新型细晶强韧型铁素体耐热钢及以TP347H为代表奥氏体不锈钢等超超临界机组锅炉用钢，已经不断被开发和应用。
As the representation of these kinds of steel, T/P91 of new grade boiler steel and TP347H of stainless steel have been developed and applied.
概述了作为钠冷快堆结构材料和包壳材料的国产奥氏体不锈钢以及作为蒸汽发生器管材的铁素体低合金钢与高温钠相容性研究的主要结果和现状。
Main results and situation of the compatibility investigation for austenic stainless steels and ferritic low alloy steels with high temperature sodium are summarized in this paper.
双相不锈钢具有奥氏体和铁素体不锈钢二者之优点，广泛用于石油化工，海水废水处理，造纸机械及承重桥梁等领域。
Duplex stainless steel with the advantages of both austenitic and ferritic stainless steels, widely used in petrochemical, water treatment, paper making machinery and the load-bearing areas of bridge.
高温高压法加速腐蚀。结果表明，C4镍基合金热影响区奥氏体晶粒长大，X60钢过热区为大块铁素体组织。
The results show that the coarse austenite grain in heat affect zone (HAZ) of Ni-base alloy is observed, mass ferrite appears in HAZ of X60 steel.
在合金钢中，如果铁素体中含有0.08%以上的氮元素或者奥氏体中含有0.4%以上的氮元素，则这种钢就称为高氮合金钢(HNS)。
The alloy steels are named High nitrogen steels (HNS) if the nitrogen element percent in the ferrites is above 0.08%or the nitrogen percent is more than 0.4%in the austenite.
研究了铁素体和奥氏体含铜抗菌不锈钢的抗菌特性及相关机制。
Precipitation behavior of antibacterial phase in copper-bearing ferrite antibacterial stainless steel;
平衡铁素体和奥氏体两相组织在焊缝金属和热影响区中的比例，保证焊接接头的性能，是双相不锈钢焊接的基本要求。
The basic requirement of welding the steel 2205 is that the weld metal and heat-affected zone obtain a favorable phase balance and retain the performance as the base metal after welding.
平衡铁素体和奥氏体两相组织在焊缝金属和热影响区中的比例，保证焊接接头的性能，是双相不锈钢焊接的基本要求。
The basic requirement of welding the steel 2205 is that the weld metal and heat-affected zone obtain a favorable phase balance and retain the performance as the base metal after welding.
应用推荐