本位置伺服系统它采用STD总线模块式的多cpu结构，主要面向经济型数控机床。
The position servo system it USES STD bus module type more CPU structure, mainly for economical nc machine tools.
CAN总线是多主对等系统，支持竞争。
CAN bus was multiple masters equity system, sustained competition.
它在多总线的系统研究，以及软件平台化的和实时性的研究中都有较强的实际意义。
This one can actually contribute to the research for the multi-bus system, and the real-time, platform software.
提出了应用概率距离测量对多传感器信息进行一致性检验的方法，并将此方法引入到基于多惯性测量组合的总线式导弹制导控制系统中。
The method for consistency check of multisensor data by using the probability distance measuring is presented, and it used in CAN bus missile guidance and control system based on multi-IMU.
在传统的套色系统多采用RS- 485,CAN等现场总线作为主要的通信方式来实现分布式控制。
Field buses as CAN or RS-485 used to be the main communication way in the traditional distributed control intaglio printing system.
国内顶板离层计算机测控系统多采用RS- 485总线，传输效率低，可靠性不高。
Most of the monitoring systems for roof bed separation are designed based on RS-485 BUS, which is low in both signal transmission efficiency and reliability.
多播技术是控制CAN总线系统中节点同步工作的有效方法。
Multicast is an effective way to control nodes working synchronously in CAN bus system.
其次，为了控制多传感器视觉测量系统而构建了CAN总线控制系统。
Secondly, the CAN bus control system for controlling multi-sensor visual measuring system is carefully structured.
并将现场总线标准中的CAN用于矿井监测系统中，实现一种既能多主网络运行，又经济实用的矿井监测系统的设计思想。
This paper puts forward CAN(Controller Area Network) field bus in the mine monitoring system to realize the design thought that mine monitoring system is economical, which can run at multi-master.
本文以安捷伦公司的E8491A为例介绍采用1394总线组建的一个多主机箱的VXI测控系统，并对1394总线的基本性能、特点加以介绍。
The paper takes HPE8491A for example to introduce 1394 bus to build a multi-mainframe VXI measurement and control system, and to describe the performance of 1394 bus.
高性能串行接口总线IEEE1394目前已用在多主机箱VXI测试系统中。
The serial interface bus IEEE1394 with high performance has been used in multi-mainframe VXI test system.
为了控制多视觉传感器的大型视觉测量系统，本文提出了一种基于CAN总线的分布式控制系统。
To control large visual measuring systems with multiple visual sensors, a distributing control system based on CAN bus is developed.
基于VME和PCI两种计算机总线的高速多通道信号采集处理系统的硬件电路设计是本论文的主要部分。
Hardware circuit design of the high speed multi-channel signal acquisition processing system based on VME and the PCI two kind of computers bus is the main part of this thesis.
首先针对网络控制系统分布式的特点，特别是类似于CAN总线的多主系统，由于没有单一的时钟提供同步机制，影响调度管理的同步。
First, aiming at the distribution of NCS, specially the multi-master system such as CAN, there is no unified network clock, so the scheduling and management are affected.
该系统采用CPLD实现了DSP与多通道adc的逻辑和时序控制，通过DSP的HPI与PCI总线接口设计实现了采集数据的高速传输。
The system utilizes CPLD to realize logical and timing control between DSP and multi-channel ADC. The interface between DSP's HPI and PCI bus is employed to achieve high-speed data transmission.
文中提出了基于软总线技术的多模式电力市场技术支持系统。
To satisfy this requirement, this paper proposes a soft bus based technique supporting system.
介绍了基于RS-485总线的单片机多机通信系统，重点介绍了MAX-487芯片和通信系统的组成，并给出了流程图。
The essay introduces multi-chip calculator communication system based on RS-485 bus, especially MAX-487 chip and the components of the communication system and gives the flow diagram.
介绍一个通过USB总线来控制多通道电调谐滤光器件的系统方案。
This paper introduces a project of how to control the multi-channel electrical tunable filters via USB interface.
介绍超声扫描成像技术在罐壁测厚中的应用。测厚系统采用多通道探头、PCI总线超声波界面卡和网络数据传输技术。
The wall thickness measurement system by ultrasonic scan imaging technology was described, in which multi-channel probe, pulser-receiver PCI card and network were applied successfully.
提出了一种实时图像信息处理系统模块化可扩展的多总线结构，详细论述了其系统总线结构、DSP芯片选型及系统复位流程等系统实现中的关键问题。
Some Key points in system realization, such as the system bus structure, the selection of DSP chips and the process of system reset, were discussed in detail.
该文提出了一个新的多处理机互逆网结构，称之谓层次型多总线多处理机系统结构。
This paper presents a new architecture for multiprocessor systems, called hierarchical multiple bus multiprocessor, which is applied for the medium and large size of multiprocessor systems.
现场总线是用于现场设备和中央控制室控制设备间的一种全数字、多变量、双向、多站的通信系统。
The Field Bus is a full digital, multiple variable, and bi-directional communication system with multiple stations.
介绍了硫化过程微机集散控制系统中PC总线工业控制计算机与多台MCS-51单片机为核心的硫化控制仪之间的多机通信的方法与实现。
The method of data communication between PC bus industrial computer and MCS-51single chip computers in rubber vulcanization distributed control system is introduced.
利用CAN总线数据帧的标识码设置传输报文的优先级，通过设计优先级晋升算法来改善多轴嵌入式数控系统报文数据通信的实时性和有效性。
The key design techniques of CAN interface were discussed. The priority of the transmitting message was set in terms of the identification code of CAN frames.
最后，本文对课题进行了回顾和总结，并对现场总线实验室中多现场总线测控系统的进一步研究的思路做了探索性分析。
In the end, we have a review and summarization of this article, and raise a new hypothesis of the Test and Control System based on the multiplicate Fieldbus.
借助于差分传输的RS 4 85总线，以微控制器为核心的数据采集系统可方便地构成多机系统，可同时并行进行数据采集。
The data gather system made by micro controller may make up of a multi computer system expediently with the RS 485 bus, which can gather data synchronously in parallel.
它为多总线主设备系统以及远程方式下的8089IOP提供总线仲裁，它还具有双极型的缓冲与驱动能力。
The 8289 provides system bus arbitration for systems with multiple bus masters, Such a, an 8086 CPU with 8089 IOP in its REMOTE mode, while providing bipolar buffering and drive capability.
通过CAN总线，监控主机和电机驱动节点可直接进行通信，形成分布式网络，简化了系统结构，实现多电机的分散安装和集中控制功能。
Via CAN-BUS, the monitor host computer and these nodes of driving motor can communicate with each other directly, like a distributed network. The system structure is more concise.
文章介绍的CAN总线控制系统实现了多视觉传感器的分布式网络化控制，尤其适合对实时性、可靠性和精度等要求较高的大型多传感器视觉测量系统的实时控制。
Based on CAN bus control system, distributed network control of multiple visual sensor was realized. It specially suitable to realtime control of large scale multiple sensor visual...
文章介绍的CAN总线控制系统实现了多视觉传感器的分布式网络化控制，尤其适合对实时性、可靠性和精度等要求较高的大型多传感器视觉测量系统的实时控制。
Based on CAN bus control system, distributed network control of multiple visual sensor was realized. It specially suitable to realtime control of large scale multiple sensor visual...
应用推荐