研究设计:预后因素多变量分析的随机对照试验。
Study Design. A randomized controlled trial with multivariable analyses of prognostic factors.
本文讨论了存在未知扰动情况下如何设计双线性多变量系统的观测器问题。
The problem of designing an observer for bilinear multivariable systems in the presence of unknown disturbances is considered.
如果将被动式电液力控制系统看作多变量系统,可以设计解耦调节器抑制系统中多余力。
Taking it as a multivariable control system, the additional operating force can be constrained by a decoupling regulator.
所设计的多变量内模控制器能使系统稳定解耦,所得到的闭环系统根据开环系统时滞来描述。
All the stabilizing IMC controllers and the resulted closed-loop systems were characterized in terms of the open-loop system's time delays.
实际的生产运行证明,该系统设计合理,运行稳定可靠,基本实现了干法脱硫过程中的多变量连续过程控制要求。
The practical running results show that this system is designed reasonably and satisfies the requirement of the multi-variables continuous process control in the CFB-FGD.
设计:随机对照实验,多变量分析。
DESIGN: a randomized and controlled experiment, multiple variable analysis.
文章针对单元机组负荷控制的特点,采用最优预见控制(OPC)策略设计了基于多变量预见控制原理的单元机组负荷最优预见控制系统,并讨论了预见步数对控制品质的影响。
This paper designed a multivariable load Optical Preview Control (OPC) system for a thermal power unit, and discussed the effect of preview step number on control performance of the load OPC system.
该方法具有简便、实用等特点,特别适用于大型复杂结构(多变量)优化设计。
The results show that this method is easy and practical, and can be applied in optimum design of large and complicated structure especially with many variables.
算例表明,本文所述方法简便、实用,尤其适用于大型复杂结构的多变量优化设计。
The resultS show that the present method is simple, reliable and can be applied to the multi-variable optimization design of large structures.
针对多变量强耦合的被控系统,提出了一种简化的内模解耦控制设计方法。
In view of strong coupling system, a kind of simple internal model decoupling control designing method is presented.
降维图可作为化简多变量逻辑函数、设计逻辑电路的一种方法。
The Reduced-Dimension Map can be used as a means to simplify the multiple variable logical function and to design logic circuit.
在系统设计中,窑炉烧成系统作为一个多变量耦合的非线性系统,是控制的难点。
In system design, firing system of kiln is a multi-variant coupling non-linear system, which is the difficulty of system control.
本文讨论了一种新的具有指定极点的多变量自校正控制器的设计方法。
This paper discusses a new design method of multi variable self -tuning controller with given poles.
本文讨论了用逆奈氏阵列法对一类非方阵多变量系统进行解耦设计。
In this Paper, decoupling design for non-square multivariable systems using inverse Nyquist array (INA) method is discussed.
本文讨论了多变量系统的解耦问题,给出了一种简便的解耦补偿矩阵的设计方法。
This paper deals with the decoupling of multivariable control systems and presents a simple method to design dynamic compensator matrix.
具有不可测输入的多变量线性系统状态观测器的设计方法有判定法和建模法。
It is well known, the design methods of an observer for linear multivariable systems are decision method and modeling method.
本文介绍了一种简化方法,供设计多变量控制系统时计算补偿传递矩阵及补偿网络之用。
This paper presents a simplified approach to evaluation of compensation transfer matrix and compensation network for designing multivariable control system.
为保证闭环控制系统的鲁棒性,设计了基于交流电机的矢量变换模型的多变量解耦控制器。
To ensure the system robustness, a multi-variable decoupling controller was designed based on the vector transform model of AC motor.
在概率描述框架下,针对含有参数摄动的线性多变量系统,提出一种新的鲁棒LQ优化设计方法。
A new approach to robust LQ optimization design for linear multivariable systems with parametric uncertainties is presented within probabilistic framework.
本文的主要工作是模型仿真、系统的耦合性分析、多变量pid解耦控制器设计及多变量预测控制器设计。
The main focuses of this thesis are model simulation, coupling analyses, decoupling PID controller design and multivariable predictive controller design based on wastewater treatment Benchmark.
最后,设计了以多变量内模控制器作为局部模型控制器的模糊多模型协调控制系统。
At last, the fuzzy multi-model coordinated control system which USES multi-variable inner model controller as the local controller has been designed.
最后,针对工业过程中常见的多变量多时滞输入输出系统,提出了一种双内模解耦控制器矩阵的设计方法。
At last, a decoupling dual internal model controller matrix design method is proposed for multi-variable time-delay input-output system in industrial processes.
在工艺设计和工艺调整时不能孤立片面地考虑某个因素,而应采取多变量分析方法,力图使整个系统优化,从而减轻内裂现象的出现。
So we shall take every factor into consideration and take multi-variable analytical methodology to optimize the whole system in order to prevent the internal crack.
为了解决起重机箱形主梁优化设计中的多变量、多约束问题,提出了一种新的基于混沌序列的粒子群优化算法。
To solve the problems of the multi-variables and multi-constraints in crane main girder optimization design, the paper proposes a new particle swarm optimization algorithm based on chaos series.
基于多变量控制系统理论,本文提出了火电厂中间储仓式制粉系统的一种解耦控制设计方法。
Based on the general theory of multivariable process control systems, this paper proposed a new design technique of decoupling control for storage pulverized-coal systems in the power plant.
此系统利用了回归正交设计方法,可进行多变量变化的各种模拟试验;
This system utilizes the regression-orthogonal method, so it can be used for the multivariable simulation test.
针对多变量饱和线性系统的时变参考输入跟踪问题,研究了一种组合非线性输出反馈控制器的设计方法。
A new composite nonlinear output feedback controller is proposed to track the time-varying reference inputs for multivariable linear systems with input saturation.
在传统涡街流量计的基础上,设计出带有HART通讯协议的多变量涡街流量计。
On the basis of traditional vortex flowmeter, a multi-variable vortex flowmeter based on HART communication protocol is designed.
在传统涡街流量计的基础上,设计出带有HART通讯协议的多变量涡街流量计。
On the basis of traditional vortex flowmeter, a multi-variable vortex flowmeter based on HART communication protocol is designed.
应用推荐