这部分都是塑性流动。
现在你能很清楚看到,塑性流动的部分。
塑性流动模型与网格实验结果在趋势上得到较好的吻合。
There's a good agreement between the plastic flow modelling of FEM and the experimental grid distortion patterns.
如果在撤去应力后变形仍保留,则称此材料呈现塑性流动。
If, when the stress is removed, the deformation remains, the material is said to exhibit plastic flow.
类似于塑性流动分析方法,定义了增量弹性应力应变关系。
The incremental elastic stress-strain relation is derived. The process is similar to the analysis in plastic flow.
塑性流动失稳破坏是由孔隙水压力的累积作用起主导作用;
Plastic flow failure is mainly induced by building up of excess-static pore pressure.
根据金属塑性流动理论和设计方法,提出新的热挤压工艺。
According to metal plasticity flow theory and design methods, a new hot extrusion process was proposed.
注入模具的是金属粉末和塑性流动剂构成的均匀混合喂料。
The feedstock injected into a mold is the mixture of metallic powder and plastic binder.
结果表明:该方法的物理实质是所述的塑性流动定理的离散。
It is shown that essentials of the method is the discretion of plastic flow rule and that the method is modified in general meaning.
本文讨论了塑性流动理论中的理想刚塑性材料的动力学问题。
We discuss the dynamics problems of ideal rigid-plastic material in the flow theory of plasticity in this paper.
残余塑性流动代表在外向水流返回时动能变为压力波的一种结果。
The afterflow represents a production of kinetic energy which becomes converted into a pressure wave when the outward flow of water is reversed.
如果将模具用透明材料制造,则可就地观察到塑性流动的整个过程。
If the die material is transparent, the process of the plastic flow can be observed easily.
硅橡胶绝缘化合物性质柔软圆滑可抵抗具有许多绝缘系统的塑性流动。
Silicone rubber insulation compounds are inherently soft and pliable and resists the plastic flow that characterizes many insulation systems.
盐层的塑性流动对井筒完整性是巨大的威胁,会对水泥环、套管造成破坏。
One unique threat to well integrity from salt zones is plastic flow.
将三维塑性流动问题转化为简单二维问题,求解了异型挤压塑性速度场函数。
Hence, three-dimension plastic flow problems are translated into two-dimension problems, and the plastic velocity field function is given in special-shaped extruding.
因盐体塑性流动形成的构造圈闭类型主要有盐脊背斜、盐丘背斜、盐边向斜等。
The salt flow resulted in several kinds of structural traps mainly including salt ridge anticline, salt dome and salt edge syncline.
利用土体的塑性流动理论,提出了用于描述饱和砂土动力反应性质的弹塑性本构模型。
Based on the plastic flow theory of soils, an elastoplastic constitutive model for describing the dynamic behavior of the saturated sands is developed.
通过工件工作区的应力分布云图考察金属材料的塑性流动情况,分析冷辗成形的机理。
According to stress distribution pattern in working region of the workpiece, the plastic flow condition is inspected, the mechanism of cold rolling forming is analyzed.
本文采用莫尔-库仑屈服准则和非关联塑性流动法则分析了轴对称软岩巷道的变形规律。
In this paper, the deformation of the axisymmetrical tunnel in soft rocks is studied by using the Mohr-Coulomb yield criterion and non-associative plastic flow rule.
强大的应力使材料发生塑性变形,产生塑性流动,为界面生成键合强度提供良好的条件;
The powerful stress is big enough to cause plastic strain and plastic flow on the interface which can provide good conditions for bonding.
塑性流动的特殊情况是冷变形,发生在硫化橡胶长时间连续承受低应力时以及金属蠕变时。
Special instances of plastic flow are cold flow, which occurs in vulcanized rubber after low stress has been continuously applied for a long time, and creep of metals.
其次,从位错动力学角度建议了一个塑性松弛函数以便描述高温、高压下塑性流动的特性。
Secondly, a plastic relaxation function describing the behaviour of plastic flow under high temperature and high pressure is suggested from the viewpoint of dislocation dynamics.
研究表明,随着金刚石磨粒粒度的减小,塑性流动变形在加工过程中起着越来越重要的作用。
The results showed that the plastic deformation played a more important role in the polishing of granite with the decrease of the grain size of the diamond bonded in the disc.
在齿轮热滚挤加工中,轮齿上的金属在强制挤压力的作用下沿齿面产生塑性流动,使齿形发生变化。
During ausform finishing process of hardened gears, there is plastic displacement of metal on the tooth surface and the distortion of tooth profile.
板材厚度较小时,形成良好焊缝的规范参数范围较宽,焊接过程中接头内部发生了剧烈的塑性流动。
If the sheet is relatively thin, the range of welding parameters obtained that can get better weld quality is wider. Heavily plastic flow of the weld metal occurs inside the weld during the process.
锻件成形过程中,非稳态、不均匀的温度场对金属的塑性流动有很大的影响,尤其是高温成形过程。
During forging forming process, temperature affects the pattern of metal deformation considerably, especially in the forming process at high temperature.
改进的反向模拟法采用了一种基于塑性流动理论的本构方程,可以充分考虑应变历史对塑性变形的影响。
The constitutive equation in the present method is based on flow theory of plasticity to consider the loading history, while deformation theory of plasticity in the classical inverse analysis method.
模具几何形状是影响金属塑性流动的主要因素之一,通过改变模具的几何形状可以改变金属的塑性流动。
The mold shape is one major factor which affects metal deformation rules, but metal plastic deformation process can be controlled through the change of the mold shape.
采用塑化松香作为岩石圈延性下层的相似材料,进行了板内塑性流动网络及多层构造变形的物理模拟实验。
The use of plasticized rosin as an analog material of the ductile lower lithosphere provides an effective approach to modelling intraplate plastic flow network and multi layer tectonic deformation.
采用塑化松香作为岩石圈延性下层的相似材料,进行了板内塑性流动网络及多层构造变形的物理模拟实验。
The use of plasticized rosin as an analog material of the ductile lower lithosphere provides an effective approach to modelling intraplate plastic flow network and multi layer tectonic deformation.
应用推荐