针对这种情况，本文研究了基于开放式数控系统的数字化采集技术。
Therefore the digitizing collection technology based on open CNC system is studied in this paper.
本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。
This thesis presents the research and design of the software system of the open CNC based Camshaft grinding machine.
提出了基于开放式数控系统上的软plc系统，并对本系统中的控制方案、开发系统和运行系统做了较为详尽的介绍。
Henceforth, a Soft-PLC system for the Realtime-Linux based on CNC system is presented, and its control scheme, development system and running system are explained in detail.
论文阐述了在基于运动控制卡的开放式数控系统中如何利用MA TLAB引擎接口技术来加入模糊控制的方法。
A method of how to use MATLAB Engine interface technology to add Fuzzy control in the Open CNC system based on the motion controller is introduced in this paper.
并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。
The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.
实验结果证明，基于软件重用技术开发数控系统软件的方法是可行的，可以从一定程度上实现开放式数控系统的重用性，互换性。
The result of experiment proves that the thought is available, and it can make the reusability and interchangeability of CNC software by some degree.
介绍了基于PC的开放式数控系统，以及一些集中体现了现代运动控制技术的产品。其中着重介绍了PMAC多轴运动控制器。
It also introduces the open NC system based on PC and some products, especially introduces the PMAC motion controller.
针对开放式数控系统体系模块化设计问题，介绍了一种基于DSP和CPLD的运动控制器的硬件设计和分析方法。
According to modularization designs for open NC system, one kind of hardware design and analysis method is introduced, which bases on DSP and CPLD to develop the motion controller.
介绍研究基于开放式运动控制器的数控系统的硬件设计，提出一套完整数控系统的机械以及电气解决方案。
Study the hardware design of the CNC system based on the open motion controller. Provide a whole solution of mechanism and electric design.
阐述了软件芯片的特点、功能划分和接口，并以所开发的镗铣床数控系统为例，对基于软件芯片的开放式数控系统的重构过程给予了详细阐述。
Apply the theory of software reuse to the development of nc system, draw the definition of software IC conception, give an expatiation on the functions and interfaces of software ICs.
以自动数控玻璃雕刻机为例，开发一种基于PMAC的开放式数控系统，该控制系统包括硬件设计和软件设计两大模块。
With the automatic NC glass engraver machine, develop an open architecture NC system based on PMAC, which includes two modules of hardware design and software design.
论文以数控车床控制系统为对象，对开放式数控系统的体系结构进行了研究，以基于PLC的开放式数控车系统为切入点，对开放式数控车系统的辅助功能实现进行了深入研究。
Taking nc lathe system as an object, the thesis focus on the structure of Open architecture nc system and researches the achievement of auxiliary function of nc lathe system based on PLC.
为适应开放式数控系统及现代制造技术的发展趋势，开发研制了基于PC机的数控原理实验教学系统。
To adapt to the trend in development of open CNC system and modem manufacture technique, a CNC principle experimental instructional system based on PC is developed.
分析了基于STEP-NC的CNC控制器的三种结构模式，指出开放式数控系统结构。
Three structure model of CNC are analyzed. Furthermore, authors point out the open NC system structure.
基于PC的CNC系统的研究重点是软件方面，本文主要对开放式数控系统的软件进行研究。
The software is the key of PC-based CNC system, and the research emphases of the paper are the software of open architecture CNC system.
介绍了基于PMAC的开放式数控系统在栽剪机中的应用，论述了数控系统的硬件构成和工作原理。
This paper introduces the application of PMAC numerical control system in clothes cutter machine. Hie hardware structure and working principal of the numerical control system is described.
在分析现有多种开放式数控系统规范的基础上，提出了基于CORBA技术的软件化开放式体系结构的数控系统，对数控系统的各个功能模块进行了分析和设计。
The architecture of open CNC system is presented based on the RTCORBA technology according to the functions of the traditional CNC. The function modules of CNC are analysed and designed.
本文详细论述了基于嵌入式的数控系统软硬件的设计和基于PC的开放式控制系统硬件平台的设计。
The designs of the hardware platform are detailedly discussed that are based on MCU's embedded CNC system and PC's on-limits CNC system in the paper.
基于此开放式数控平台，进行了复杂曲面加工的研究。
Research of complex curved surface machined on the platform has been done.
提出一种基于STEP-NC的开放式数控系统，确定了开放式数控系统的总体结构，并着重介绍了STEP-NC数控系统各组成模块的功能。
The open CNC system on STEP-NC was brought forward. The gross structure of the open CNC system was put forward, and the function of each compositive module of…
提出一种基于STEP-NC的开放式数控系统，确定了开放式数控系统的总体结构，并着重介绍了STEP-NC数控系统各组成模块的功能。
The open CNC system on STEP-NC was brought forward. The gross structure of the open CNC system was put forward, and the function of each compositive module of…
应用推荐