反力适中，吸能量较圆筒型护舷高。
Suitable reaction force, with higher energy absorption than cylindrical rubber fender.
圆袋式是指滤袋为圆筒型。
Round bag style means the filter bag is in cylindrical shape.
提出了一种圆筒型错片结构微型直线步进电机。
The paper puts forward a cylindrical staggered-sheet structure micro linear stepping motor.
圆筒型橡胶护舷反力低，面压适中，吸能量合理。
Cylindrical type rubber fender has low reaction force, little surface pressure, reasonable energy absorb.
圆筒型橡胶护舷适用于各种大小船舶和各类码头。
Cylindrical fender is applicable for ships with different sizes and different docks.
最后对一台圆筒型直线电动机进行了温升测试，效果良好。
In the end, the temperature rising of a cylindrical linear motor is tested, the results are good.
这项研究集中在药物从PLGA圆筒型微囊中释放的数学模型。
This study focuses on mathematical modeling of drug release from PLGA cylindrical millirods.
本文提出了预测圆筒型加热炉燃烧室内质量、动量及能量传递的二维数学模型。
A two-dimensional mathematical model has been developed to predict the transport of mass, momentum and energy in a cylindrical combustion chamber.
圆筒洗矿设备广泛用于各种难洗的大块矿石，该洗矿机分圆筒型和圆筒加筛条型两种。
Cylinder ore washing equipment widely used in all kinds of difficult to clean the bulk of ore, the ore washing machine points cylinder type and add the sieve cylinder type two kinds.
根据细胞双电层模型和电学原理，推出了圆筒型植物细胞膜上电荷产生的细胞内压力的计算公式。
A formula about cellular pressure produced by the electricity on the plant cell membrane was deduced by the double electrical layer model of cell membrane and electrical theory.
在上述控制策略的基础上，对圆筒型永磁直线伺服控制系统的硬件和软件分别进行了设计与实现。
Based on the above control strategy, the hardware and software of the tubular PMLSM servo control system are designed and realized respectively.
将圆筒型直线电机与井下泵组合成机电一体化产品的设想，使整个系统的结构变得简单而易于控制。
This electromechanical product imagination combined cylinder linear motor with well pump, which makes the whole system easily controlled and simplified.
简要概述了闪速炉气力输送系统收尘装置的改造和圆筒型布袋收尘装置在气力输送系统中使用的效果。
The paper introduces briefly the retrofit of the cleaning equipment and the operating results of the cylinder type bag filter in the fluidization systems for the copper smelting flash furnace.
本文以圆筒型永磁直线同步电机为研究对象，致力于电机的设计、电磁性能计算及电机温度场的研究。
In the paper, tubular PMLSM was the research object, the paper committed to motor design, electromagnetic properties calculation and temperature field research.
分析了圆筒型直线电机的性能及其作为井下泵动力系统的优势和应用前景，提出了直线电机结构改进方向。
The paper analyzes the characters of cylinder linear motor and the advantages and application future as the well pump drive system, and mentions the its structure modification direction.
大型水电站厂房的机墩结构要承受巨大的动力荷载，通常采用圆筒式机墩，非圆筒型机墩在国内尚无应用。
Unit foundation of powerhouse of large scale hydropower station need bear very heavy dynamic load, generally used cylinder form, the foundation with non cylinder form has not been applied in home.
圆筒型直线感应电机具有结构简单，成本低廉等优点，在短行程、小功率的直线运动场合具有广泛的应用前景。
Tubular linear induction motor (TLIM) is not only cheap but also simple in manufacture, can be widely used in small power drives of short distance.
研制了一种新型的带有一个多尖端旋转电极对一个同心圆筒型固定电极的甲烷放电制备碳二烃的等离子体反应器。
A novel plasma reactor with rotary multi tip electrode and a fixed concentric cylinder electrode has been developed in order to use in CH4 discharge and to produce unsaturated C2 hydrocarbons.
该公司还指出了“圆筒型”钻井船的内在优势，即，它不仅有较强的甲板载荷能力，并且，其在恶劣环境中的稳定性也更好。
The company is also touting the inherent advantages of the circular concept in terms of high deckload capacity and improved stability in harsh environments.
潜油直线抽油系统是一种新型结构抽油系统，圆筒型直线永磁同步电动机因其最优综合性能而成为该抽油系统的理想驱动电机。
Tubular linear permanent-magnet synchronous motor (TLPMSM), which is also new itself, has become the ideal driving motor because of its optimal performance.
本课题对数字化圆筒型永磁直线同步电机伺服控制系统的研究具有重要意义，对其他直线电机的数字化伺服控制系统的研究也有一定的参考价值。
The subject is of far reaching importance to research of digital tubular PMLSM servo control system, and it also has reference value to research of other linear digital servo control system.
采用圆筒爆破试验方法研究了易碎型钨合金的破片分布特征，并与93W合金的结果进行了对比。
The fragments distribution characteristics of fragile tungsten alloys were studied by means of exploding tungsten alloy cylinders. The experimental results were also compared with that of 93w alloy.
针对卫生型过程连接的特点，介绍利用圆筒式压力测试系统的解决方案。
The paper introduces the in-line pressure measurement as the best solution based on the specialty of the process connection.
根据试验结果，提出合理的振型、基频建议公式和加速度分布系数建议图形及大圆筒结构适用范围。
Proposals for formulas of mode of vibration and frequency, figures for distribution of acceleration coefficient and scope of application are rationally suggested.
普通型：变压器油箱均为圆筒密封式结构。
利用NYL-200D型压力实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了准静态和动态冲击压缩实验。
Quasi-static and dynamic compression experiments of carbon fiber reinforced epoxy resin matrix composite cylinder structures are implemented by NYL-200D testing machine and drop weight equipment.
用有限元法建立了圆筒谐振子的模型，通过MATLAB软件编程，计算出合理的谐振子参数，对其频率密度特性进行了分析，并给出了振子的振型分布。
FEM Model is made and programmed in MATLAB, reasonable size is worked out, relation between frequency and density is analyzed, and the vibratory mode shape is given.
如果不是每个圆筒都设置有其各自的驱动装置，则与驱动装置耦合的圆筒可以经由V型带等与其他圆筒连接。
The cylinder coupled with the driving mechanism can be connected with other cylinder by the V-shaped strip unless each cylinder is provided with its respective driving mechanism.
如果不是每个圆筒都设置有其各自的驱动装置，则与驱动装置耦合的圆筒可以经由V型带等与其他圆筒连接。
The cylinder coupled with the driving mechanism can be connected with other cylinder by the V-shaped strip unless each cylinder is provided with its respective driving mechanism.
应用推荐