压碎、研磨塑料或固体涂料成粉末形式的设备。
Device used to crush or pulverise plastic or solid coating to powder form.
粉末涂料为固体涂料(没有溶剂),有利于环保,而且节约涂料,涂膜质量好。
The powder paint is solid paint (no solvent), so be propitious to environment, and saving paint, and painting good quality.
玩具用涂料:玩具用涂料是涂覆在玩具表面能形成涂膜的液体或固体涂料的总称。
Coatings for toys: any liquid or solid paint can be applied on the surface layer of toys to form a coating.
对固体的和冷却的挤出粉末涂料粗破碎的机械。
The machine that makes kibble (chip) from solid and cooled extruded powder coating.
在涂料、颜料、填充塑料的生产过程中,固体颗粒在介质中的分散性能直接影响产品质量。
In the production of coating, colorant, and filled plastics, the dispersion of solid particles in the agent directly determines the product quality.
由HAR和六次甲基二异氰酸酯反应制备了性能优异的高固体分双组分丙烯酸聚氨酯涂料。
A double component coating, acrylic polyurethane with high solid and good performance, was prepared by the reaction of HAR and HDI.
根据涂层的要求,选择了锌黄环氧底漆和双组分高固体丙烯酸聚氨酯漆作为厢体的涂料。
According to the requirement of coatings, yellow zine epoxy primer and two - pack high solid acrylate polyurethane coating are chosen to be containers paints.
在粉末涂料配方中,构成涂膜的主要成分,它用以连接颜料和助剂,在基材上形成固体涂膜。
The portion of the powder formulation that forms the primary strength of the film. It binds pigments and additives into a solid film and to the substrate.
介绍了高固体分丙烯酸汽车涂料的制备和性能。
Preparation and performance of high solid acrylic polyurethane automotive coating are introduced.
采用低分子量聚酯齐聚物作为丙烯酸树脂的增塑剂,配制高固体分丙烯酸聚氨酯涂料,不仅提高涂料的施工固体分,涂膜的性能也优异。
A high solids acrylic polyurethane coatings by use of a polyester oligomer as plasticizer has been prepared, which can lead to a higher application solids and excellent film performance.
综述了高固体分、水性、粉末汽车涂料的研究现状及进展。
The research situation and progress in automobile coatings in terms of high-solid, waterborne and powder paints are reviewed.
所述涂料可以是双组分体系或两部分体系,并且可具有高的固体含量。
The coating can be a two-component or two-part system, and can have a high solids level.
电渗是要讨论的最后一个过程,当涂料固体份在阴极上沉积之后,此涂膜为半渗透性。
Electroendosmosis is the final process to be discussed. As paint solids are drawn to the cathode and precipitated, the film becomes semi-permeable.
最大的空气和流体喷嘴的选择,模型的2100年所有传统喷涂涂料,包括高固体。
Largest selection of air and fluid nozzles in the industry behind it, the Model 2100 will spray all conventional coatings, including high solids.
有机溶剂(VOC)含量低,低表面能有机硅防污涂料一般固体含量都超过70%。
Organic solvents (VOC) content is low, Generally low surface energy silicone antifouling coatings this more than 70%.
列举了高固体分丙烯酸聚氨酯涂料配方及其性能检测结果。
The formulation of acrylic polyurethane coatings and test results were listed.
详细阐述高固体分醇酸树脂涂料、环氧树脂涂料、聚酯树脂涂料、丙烯酸树脂涂料以及聚氨酯涂料的特点和应用。
The characteristics and applications of high-solid alkyd coatings, epoxy coatings, polyester coatings, acrylate coatings and polyurethane coatings are specifically discussed.
涂膜的干燥往往需要一定的时间,才能保证最终形成固体涂膜的质量,因而干燥时间的测定是涂料常规性物理检验的一个重要方面。
In order to ensure that the film will be in a solid film in quality, the determination of drying time is very important in inspect of the mechanical and physical performance of the paints.
羟值(固体):20;柔韧、光泽、耐深冲、卷材涂料、制罐涂料。
OH Value (Solids) : 20; Good flexibility, high gloss, Deep drawing, Can coating, coil coating.
羟值(固体):25;柔韧,光泽,耐深冲及耐蒸煮,卷材涂料。
OH Value (Solids) : 25; Good flexibility, high gloss, Deep drawing and steam sterilization resistance, Can coating, coil coating.
建筑内墙固体粉末涂料,现场用水调兑即可使用。
Preparation of powder coatings and safety management of application;
在干漆厚度与涂料大量的固体物之间确有直接的关系。
There is a direct relationship between the dry film thickness and the solids by volume of the paint.
分别从汽车涂料使用的底漆、中涂漆、面漆三方面综述了水性涂料、粉末涂料、高固体分涂料在汽车涂装体系中的应用。
The article has reviewed the application of waterborne coatings, powder coatings and high solid coatings for finishing of automobiles, in terms of three aspects of primer, inter-coat and topcoat.
分别从汽车涂料使用的底漆、中涂漆、面漆三方面综述了水性涂料、粉末涂料、高固体分涂料在汽车涂装体系中的应用。
The article has reviewed the application of waterborne coatings, powder coatings and high solid coatings for finishing of automobiles, in terms of three aspects of primer, inter-coat and topcoat.
应用推荐