流体流动过程,包括流体输送,过滤,固体流态化。
Fluid flow processes, including fluids transportation, filtration, solids fluidization.
选用三种颗料状物料,在四种不同倾斜度的斜管中测定了不同负压差和固体流率条件下的气体流率。
The experimental data of gas flow rate in the bed with four slant angles and three kinds of particle materials are obtained.
淤泥,粘土和土坯往往是固体流,而不是障碍,吸收水,因此考虑在沙子,覆盖或其他材料,以增强吸收低孔隙度地面。
Silt, clay and adobe often form solid barriers that shed water instead of absorbing, so consider adding sand, mulch or other absorption enhancing materials to low-porosity ground.
凝聚过滤器用于清除燃料流中的液体和固体颗粒,以满足燃料系统的性能要求。
The Filter Coalescer is used to remove liquid and solid particulates from the fuel stream for performance requirements of the fuel system.
为了研究固体燃料冲压发动机内部套管结构调节燃料流量的特性,对某模型发动机的湍流燃烧流场进行了数值分析。
In order to study the fuel mass flow rate regulation characteristics of tube-in-hole for solid fuel ramjet, the flow field of turbulent combustion was numerically analyzed.
良好的固体特性。低浓度固体会快速沉降,快速脱水;在峰流时不会出现二沉池冲刷问题。
Favorable Solids Characteristics. Low concentration of dense solids settle rapidly, dewater rapidly; no clarifier washout problem at peak flows.
而且,这一成果为整个固体火箭发动机领域流场的一体化计算打下了基础。
In addition, this achievement provides the basis of integrative performance calculation for all kinds of solid rocket motors.
通过测量固体火箭发动机水下工作过程中的推力和侧向力,研究了扰流片和摆喷管两种推力矢量方式的水下推力矢量特性。
By measuring the thrust and lateral forces of solid rocket motor during firing conditions, the thrust vector control performances of jet TAB TVC and movable nozzle TVC were studied.
用有限元素法数值模拟了固体火箭发动机喷管内缝隙的流场和热环境。
The flow field and thermal environment of gap in solid rocket nozzle were simulated by finite element method.
激光多普勒测速雷达技术利用激光多普勒效应测量固体目标的运动速度,或者流场速度分布。
Velocity of solid targets and velocity distribution of flowing fields can be measured by Laser Doppler Velocimeter (LDV) technology based on Doppler Effect.
对于固体火箭发动机羽焰温度的测量是困难的,了解其温度分布对于研究发动机内燃烧流场的特性有重要价值。
The temperature of a high temperature, high pressure plume solid propellant rocket engine is difficult to measure but is useful for determining the combustion status of the engine.
应用光一电检测方法测量气一固两相流中固体微粒浓度、速度,是一种十分有效和可行的方法。
The optical-electrical measurement is an effective and feasible way to measure solid particle concentration and velocity in gas-solid two phase flow.
文中提出了固体粒子稀相流垂直管内适用的压力损失计算式。
The applicable formulae of pressure drop in the dilute flow for solid particle through a vertical pipe are developed.
介绍了一种轻便恒流充电脉冲固体激光器电源。
The paper introduces a compact constant current charging power supply for pulse solid laser.
但是旋风除尘器中存在的短路流,上灰环,二次扬尘等现象,使得固体颗粒不能被完全有效分离,降低了除尘器的分离效率。
But such as short circuit flow, up ash loop, re-entrainment exists and so on phenomenon, made the solid particle couldn't be separated efficiently, so reduced separation efficiency of the cyclone.
采用了适当的处理方法对其计算模型进行了简化,以及对其来流面、出流面、固体壁面及计算区域内障碍物的边界条件进行确定。
The boundary conditions concerning inflow sect ion, outflow section, solid wall surface as well as obstacles within computation al region was dealed adopts appropriate approaches.
该文建立了固体工质电热化学炮(SPETCG)内弹道一维两相流模型。
The one dimensional two phase flow model of solid propellant electrothermal chemical gun (SPETCG) is established in the paper.
该方法可用于固体发动机方案选择、性能评定及流场计算。
The method can be used for the scheme selection, performance estimation and flow field computation of solid motor.
气力流槽是一种常用的固体粉料、粒料的输送设备。它适用范围广,结构简单,制造价格低廉。
Pneumatic chute is a kind of conveying equipments for solid powder and granule and has large scope of application, simple structure and low manufacturing expense.
介绍一种晶体管恒流全新触发连续固体激光器氪灯电源。
A power supply of continuous solid laser krypton lamp using a new touching off system and transistor constant current circuit is proposed.
旋风分离器内部进行的是两相流运动,是气相和固体颗粒相的分离过程,而固体颗粒的运动在很大程度上取决于分离器内湍流的运动。
Two-phase flow in the cyclone separator is a process of the solid particle separation from the gas phase, while the particle movement trace is decided by the turbulence to a large extent.
然后,利用某型号固体火箭发动机进行喷管分离流试验,测得了喷管壁面上沿轴向的压强分布数据。
Then, the experiment of flow separation in the nozzle was done with a solid rocket motor, and the inside pressure data along the axis of the nozzle was gotten.
固体相含率在轴向上符合散式流态化的规律,在不同的径向位置固含率是不同的。
And the solid loading accord with particulate fluidization in axial, in different radial, the solid distribution were also different.
理论分析了通过旋流分离压缩空气中水和固体污染物的机理,计算了可分离污染物的最小直径。
The mechanism of rotating flow to separate water, solid contaminants from compressed air are analyzed, the minimum size of contaminants that could be separated is calculated.
固体“类流态”是固体表面及其内部存在的一种类似于流体的状态,是一种除气、液、固、液晶之外的一种新的物质存在状态。
Solid quasi-fluid state, which is similar to liquid and exists in surface and interior of solid, is one new kind of state besides gas, liquid and solid state.
采用块结构网格与二阶精度流场分区求解技术,对固体火箭冲压发动机增程弹丸超声速进气道特性进行了深入研究。
By means of block structure grid and second-order zonal solver method, the research on supersonic inlet performance of solid rocket ramjet assisted range projectiles was carried out.
介绍了一种高频串联谐振充电的固体脉冲激光电源及其数字化控制恒流充电技术。
This paper introduces a high-frequency series resonant charing method of solid pulsed laser power source, basing on constant current charging of digital control technology.
本文提出一种能模拟流场中不同形状和性质的固体的新方法——空度的概念。
Porosity is presented as a concept and approach to simulate solid bodies with various geometry and character in flow fields.
水力旋流站能对吸收塔浆液里的悬浮固体进行分离和分配。
The hydro cyclone battery separates and distributes the absorber slurry suspended solids.
水力旋流站能对吸收塔浆液里的悬浮固体进行分离和分配。
The hydro cyclone battery separates and distributes the absorber slurry suspended solids.
应用推荐