适用于各种扬声器及元件单点打胶。
It is applicable for single gluing of various loud-speakers and components.
使用元件必须配备调压变压器或可控硅调压器及电压、电流表和温度自动控制仪表等。
To use the elements you should prepare the adjustable transformer or silicon controlled transformer voltage meter current meter and autocontrol temperature meter etc.
太阳能热水系统主要元件包括收集器、储存装置及循环管路三部分。
Solar hot water system mainly components including collector, storage device and the circulation line three parts.
高灵敏度的氟里昂气体传感器是检测氟里昂泄漏的关键元件,本文叙述了氟里昂气敏器件的制作工艺、敏感原理、测试方法及测试结果。
Freon sensor with high sensitivity is key device for detecting freon leak. The manufacture technology, sensitivity mechanism, measure method and parameter of samples have beendiscribed in this paper.
用途:适用要求较高的微波器件,传感器,滤波器及航天,导弹上应用的元件气密性带压力保护的封焊。
Usage: suitable for air tight seal welding with pressure protection of microwave device, sensor, filter and components that used on spaceflight and guided missile that have high requirement.
本文主要介绍由磁性元件组成的高炉程序控制器及旋转布料器控制系统。
This paper describes the program controller and the control system of distributing gear of a blast furnace with the application of magnetic logic elements.
有关电子元件包括霍尔元件传感器、电动机控制电路及全桥式输出。
This includes the Hall element sensor, the motor control circuitry, and the full output bridge.
介绍了在电视接收机、显示器行扫描电路中的磁饱和电抗元件(行线性校正线圈)的原理及对铁氧体磁芯材料性能和工艺的要求。
This article describes the principium of line scan revise winding used in the line scan circuit of TV receiver and display, and the requirement for the characteristics of the ferrite core.
介绍了用集成锁相环路解码器LM567作为超声波检测元件,以89C51单片机作为主控元件的超声波液位测量的原理、电路及测控程序。
The theory, the circuit, and the program were introduced using LM567 as the component to detect the ultrasonic and using the MCU 89C51 as the main control component.
而电容式分压器属于容性元件,可能与系统中的感性元件形成谐振,出现过电压,危及设备及系统的正常运行。
Also the capacitance divider has the possibility of resonance with inductance component in the system, which can make a heavy over-voltage and endanger the running of equipments and power system.
该泵密封油室内设置有高精度抗干扰漏水检测传感器,及定子绕组内预埋了热敏元件,对水泵电机绝对保护。
The pump seal oil leakage indoor settings are high-precision interference detection sensors, and embedded within the stator windings of the thermal components, absolute protection of the pump motor.
通讯及宽带网络用宽带脉冲变压器也担当起“重任”,成为宽带网络产品的核心元件之一。
Especially, the transformers that are used in telecom and wideband networks act as an important part and become a pith of parts.
深圳市捷福欣实业有限公司是一家专业从事各种连接器、接插件元件及各种线束的研制开发与生产的企业。
Is a professional engaged in various connectors, wiring harness connector components and a variety of research and development and production of enterprises.
先进的技术使用可使贴标机达到较高的速度、精确度及可靠性,包括步进电机、室内微处理器以及极可靠的电子元件。
Speed, accuracy and reliability are achieved through the use of advanced technology incorporating stepping motors, in house microprocessor development and ultra-reliable electronic components.
该模块提供了接触器控制原理图及电子控制电路原理图、印刷电路板图及元件清单。
This module can show the contactor control schematic diagram and the electronic control circuit schematic diagram, printed circuit board drawing and element list.
本文结合新型压力控制元件—数字式压力控制器的测试试验,阐述了压力控制器微机辅助测试系统的原理及软硬件结构。
This paper describes the operation principle of CAT system of pressure controller and the structure of the hardware and software by a new (digital) pressure controller test.
本文给出了选择探测器关键参数的准则及选择、计算各元件参数的可靠判据。
This paper gives the strict principles for selecting key component parameters and the reliable criterion for selecting and calculating the component parameters.
各向异性导电连接器,探针元件,和晶片检测仪器及晶片检测方法。
Anisotropically conductive connector, probe material member, wafer inspection apparatus, and wafer inspection method.
实验表明,采用组合式均匀叉指换能器及变形多条耦合器元件可有效提高对陷阱频率的抑制。
The experiments show that suppress at trap frequency can be effectively improved by using composed uniform IDT and modified MSC.
各向异性导电连接器,导电浆料成分,探针元件,和晶片检测仪器及晶片检测方法。
Anisotropic conductive connector, conductive paste composition, probe member, wafer inspection device and wafer inspection method.
介绍了波导全息指纹图像传感器中的波导全息元件、成像系统及计算机接口部分设计制作原理。
The design principles and fabrication of the micro optic components used in the sensor are also described.
升力检测系统包括基于压阻式升力传感器的检测元件和基于PAC的数据采集及记录的控制系统。
The lift measurement system includes lift sensor and data collecting and analyzing control system based on PAC (PC based PLC).
介绍麦秸螺旋器主要参数的计算及关键元件的设计。
The article introduced the calculation of main parameter of screw-feeder for straw and design of the machines key parts.
器件包括常用的传感器、功率器件、微控制器及电子元件。
The devices are composed of frequently used sensors, power device, micro-controller and electric components.
通过I/O数据采集卡收集外部霍尔元件、光电传感器及编码器提供的信息。
The system used the I/O data collection card to collect the signal of Hole component, photoelectric sensor and coder.
以地铁车辆用DC750V牵引变频器为例,采用IGBT作为主要开关元件设计了逆变器主电路及控制系统,并利用MATLAB/SIMULINK进行了仿真。
It is designed that the main circuit and control system using the IGBT as its switch element based on the DC750V traction transducer of metro vehicles. The system is also simulated by MATLAB/SIMULINK.
本发明的目的在于提供一种没有导通不良的电可靠性高的热电变 换组件及热电变换元件用连接器。
Intended is to provide a thermoelectric conversion module and a connector for a thermoelectric conversion element, which have no faulty conduction but high electric reliabilities.
电器方面采用了PLC可编程序控制器及进口电器元件,如:abb、施耐德等。
Electrical equipment USES PLC programmable controller and imported electrical components, such as: ABB, Schneider, etc.
电器方面采用了PLC可编程序控制器及进口电器元件,如:abb、施耐德等。
Electrical equipment USES PLC programmable controller and imported electrical components, such as: ABB, Schneider, etc.
应用推荐