在论述单周期控制技术的基础上,重点讨论了单周期控制半桥DC/DC变换器的设计与实现,并给出了仿真与试验结果。
The design and realization of one-cycle controlled half-bridge DC/DC converter are mainly discussed on the basis of presenting one-cycle control technical.
颇受欢迎的绿信比、周期和相位差优化技术(SCOOT)现在已得到广泛使用,负责对交通进行控制。
The widely used Split, Cycle and Offset Optimisation Technique (SCOOT) is popular with those responsible for traffic control.
在审计术语中,控制没有技术上的标准,而只是一些过程,通过它们可以访问标准,并在一定周期的基础上进行审阅。
In auditing lingo, controls are not technological measures, but are the processes by which technological measures are assessed and reviewed on a periodic basis.
对服务生命周期的关注允许移动网络运营商为其控制和传输网络选择最好的技术。
This focus on the service life cycle enables mobile network operators to select their best options for control and transport networks.
仅次于组织方面障碍的是似乎看起来并不存在的技术障碍,但对于任务、数据版本控制、并发性(锁定)和生命周期管理而言,这决不简单。
Next to the organizational hurdles, the technical ones almost seem scant, but when it comes to the task, data versioning, concurrency (locking), and life cycle management are never simple.
软件周期中的强制性业务和技术的控制。
Mandating both business and technology controls over the software lifecycle.
目前,传感器管理技术的研究主要集中在传感器对跟踪目标的分配上,而对传感器采样周期的控制研究很少。
To date, most sensor management techniques are focused on the sensor selection algorithms, hut how to control the sampling period in multisensor surveillance is seldom studied.
FMS的复杂性决定了其控制系统的研究开发是一项技术复杂、周期长、成本高的活动。
The development of the control system of FMS is project with a complex technology, long periodic and high cost because of its complexity.
文中将目前逆变器输出波形控制技术分为基于周期的控制和瞬时值反馈控制。
The waveform control technology of inverter is classified into periodic control and instantaneous control in this paper.
加工精度的控制和保证,装配技术的改进,从而大大缩短了模具装配时间和制造周期。
The control and guarantee of the processing precision and the improvement in the assembly technology greatly shortened the assembly time and manufacturing cycle of the die.
该技术在某小卫星中应用,能有效满足系统控制周期的限制和系统可靠性要求。
This technique is applied in small satellite, and satisfies the limitation of control cycle and reliability requirement of system.
对于条件周期轨道(如晕轨道)必须在控制过程中考虑高次项,控制条件复杂,技术上实现相对困难。
For conditional periodic orbits (such as Halo orbits), high-order terms should be taken into consideration in the control process, and, technically speaking, this is complicated to achieve.
弥补了原子光刻技术中利用激光驻波场控制原子堆积只能制作单一量子点、线等周期性图形的不足。
It can make up the shortage that only the periodic dots or lines can be made when using laser standing wave field to control the atoms to stack on wafer in atom lithography.
介绍了数控飞锯柔性控制原理,分析了数控飞锯一个锯切周期各运动段的柔性控制技术。
This paper introduces flexible control principle of digital control flying saw, analyses its flexible control technique in all move section of one saw period.
为了克服逆变电源因带整流性负载而引起的输出电压波形周期性畸变,本文选取重复控制技术为研究对象。
Most research is concentrated on repetitive control technique in this paper for the sake of overcoming the repetitive distortion when inverter induced by rectifier-type nonlinear loads.
提出了振动周期控制采用模糊控制的技术路线,设计了参数因子在线自整定的模糊控制器。
The technical route of using fuzzy control for control of vibration cycle is put forward, and a fuzzy controller whose parameters can be optimized on line is designed.
在此基础上,采用控制周期总体间隙状况和局部短路的伺服控制策略,建立了基于模糊控制技术的回转式电火花展成加工伺服进给控制系统。
And adopting the method in which including periodical detecting and local detecting of gap discharge state, the servo feed control-system based on fuzzy control technology was designed.
这种技术利用单周期控制的积分性质和动态反应快的特点,对交错运行变换器的各单元电感电流进行控制,实现交错单元间电流的平均分配。
It makes use of the integrating character and the fast response of one cycle control to realize the current sharing of the interleaving converters.
针对上述原因,从技术上和管理上提出了预防措施,通过控制水质、材质升级、加强污垢清洗等措施,确保了板式空冷器设备的长周期运行。
To solve this problem, preventive measures have been taken in respect of technology and management such as control of water quality, upgrading materials and strengthening of fouling cleaning etc.
在面向能源的设计技术是在产品的整个生命周期中需对能源消耗进行控制和优化。
The energy oriented Design Technology try to controls and optimizes energy consumption in the whole lifecycle of a product.
加工精度的控制和保证,装配技术的改进,从而大大缩短了模具装配时间和制造周期。
The control and guarantee of the processing precision and the improvement in the assembly technology greatly shortened the assembly time and manufacturing c…
解决PD M中对长周期设计事务的高度并发控制、保证设计数据的正确性和一致性是PD M中的关键技术。
The design transaction model and high concurrency control mechanism which guarantee correctness and consistency is the key in PDM.
提出了一种逆变器双环控制技术,该方案内环为单周期控制,外环采用K系数法设计的补偿器。
This paper presents a double-loop control of inverters. The inner-loop of this scheme is One-cycle Control and the outer-loop is the compensator designed by the K factor.
实测结果表明重复控制技术在对周期性重复运动的控制上确实优于PID控制技术。
The test results show that the Repetitive Controller is better than the Enhanced PID Controller.
实测结果表明重复控制技术在对周期性重复运动的控制上确实优于PID控制技术。
The test results show that the Repetitive Controller is better than the Enhanced PID Controller.
应用推荐