检查锚机及绞车的各轴承间隙。
因为标高决定了各轴承的载荷分布，从而直接影响转子轴承油膜的稳定性。
Because the loading distribution of each bearing are decided by the height mark, which will affect the stability of the bearing.
用有限元法及考虑各轴承油膜力非线性，建立了大型汽轮发电机组轴系非线性方程组。
By the use of a finite element method and by taking account of the non-linearity of bearing oil film force established are the shafting nonlinear equation group of the said turbogenerator.
应根据负荷灵敏度矩阵通过综合调整各轴承处的标高达到负荷在各轴承间合理分布的目的。
The reasonable distribution of multi-support rotor bearing loads can be achieved by adjusting the elevation of all bearings based on the load sensitivity matrix.
应根据负荷灵敏度矩阵通过综合调整各轴承处的标高达到负荷在各轴承间合理分布的目的。
The reasonable distribution of multi-support rotor bearing loads can be achieved by adjusting the elevation of all bearings based on the load…
而目前，国内各轴承企业以及钢球厂在进行钢球表面缺陷的检测时主要采用人工手检的方式。
To resolve above problem, this paper designed mechanism body and related control parts of steel ball surface defects detector.
滚动轴承的振动与噪声已成为轴承的基本特性之一，各轴承工业发达国家均进行了大量深入系统地研究，现已达到相当高的程度。
The vibration and noise of the rolling bearing is one of the basic properties of rolling bearing. Some advanced countries in bearing industry have made deep and systematic study on it at higher level.
曲轴的各轴颈在很高的比压下作高速旋转运动，使轴颈和轴承受到强烈磨擦。
Because the shaft necks whirligig with high speed under high pressure, the shaft necks and bearings endure intense attrition.
本程序适用于一个装有多个传动部件，且各传动部件上受载点方位角又不相同的轴系上之轴承组合设计计算。
A program is suitable, for the calculation in designing bearing combinations of a shaft system with transmission components which are loaded in different directions.
针对加工轴承用多刀半动车床工装通用性差、制造困难等问题，对工装各更换件易损部分进行了改进。
To counter some problems about bad universal use and making difficultly belong to semi-automatic-cutter lathe for pressing bearing, wear position of renewals was improved.
本文通过为测量推力轴承各轴瓦的受力而研制的荷重传感器。
In this paper, the design of a load sensor for measuring the pads loaded in thrust bearing is described.
系统地研究了推力轴承各耦合动特性系数对转子横向振动状态的贡献。
The coupling oil film forces and moments of thrust bearing due to the lateral vibration of rotor can be described with a group of linear stiffness and damping coefficients.
对转台中环主轴施加轴向定位预紧力，通过脉冲激励法试验得到角接触球轴承的轴向刚度，试验结果与理论结果吻合较好，为转台研制中各轴系预紧量的控制提供了理论和实验依据。
The axial fixed position preload is applied to middle ring of the shaft, the axial rigidity of the angular contact ball bearing is obtained by the impulse excitation tests.
介绍了“北京交通大学-NTN牵引电机轴承试验站”试验台的功能、性能指标以及各主要组成部分的结构与原理。
The functions, performance index, configurations and principles of the main modules of the "BJTU-NTN test station of traction motor bearing" were introduced.
介绍了圆锥轴承套圈精密辗扩机的结构、控制原理及各主要组成部分的设计特点。
The structure, control principle and main part design features are introduced for precision rolling machine of the tapered bearing ring.
分析了各主要参数对静压轴承动态特性的影响，为合理设计液体静压轴承提供了方法。
The effects of various main parameters on their dynamic characteristics have been analysed, which provides a reasonable basis for design of the hydrostatic bearings.
各滚筒(15)的旋转轴(17)的轴承部形成于上述驱动齿轮(13)外周的齿部(22)的内侧。
Each of the rollers (15) has a bearing portion of a rotary shaft 17 formed inside the gear portion (22) at the outer circumference of the drive gear (13).
工作台主轴用长支承距上下两端各一套双列短圆住滚子轴承，保证在高处加工亦能在高精度下平稳的工作。
Supported by a long table spindle from the upper and lower ends of a double row of the short-lived circular roller bearings to ensure that height in the high-precision machining can under steady work.
向心关节轴承在承受载荷时，承载区各点的压应力是不等值的。
When absorbing load, various loaded points of plain radial bearing receive different compressive stresses.
其次，由轴向定位预紧轴承受径向载荷时各滚子的变形，推导出轴承的径向刚度计算公式；
Second, the calculation formula of radial rigidity is deduced according to the deformation of rollers under the radial load with axial position preload.
第一和第二角运动的组合使得各基片在没有齿轮和轴承的情况下绕它的纵向轴线运动。
The combination of the first and second rotational motions cause each of the substrates to move about its longitudinal axis without gears and bearings.
分析轴承阻尼、轴向雷诺数以及密封各参数在两种支承下对系统临界失稳角速度的影响。
The effects of bearing damping, axial Reynolds Numbers and seal parameters on the critical speed of instability are investigated and the results can be utilized for turbopump rotor-seal system design.
用有限元法导出了转子上各结点的不平衡响应对转子-轴承系统各参数灵敏度的计算公式。
The reason of failure is that traditional ways of design of rotor bearing system are not so reasonable.
压头在压紧轴承的时候，可以自动调整压头的位置，保证各压头压力均等。
When the squeeze heads compress the bearing, the position of the squeeze heads can be automatically adjusted to guarantee each squeeze head pressure is equal.
轴承径向和轴向的承载能力都比较大，各配件可替换性强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
示例性轴承包括：一 个或多个推力垫，其中各推力垫包括一部分锥形井；
An exemplary bearing for a turbocharger includes one or more thrust pads where each thrust pad includes a portion of a conical well;
对各典型状态滚动轴承在不同转速和载荷下的声发射信号进行了振动分析，研究了滚动轴承的损伤振动随转速和载荷的变化规律。
Based on the vibration analysis of AE signals under varying load and rotating speed, the patterns of damage vibration of rolling element bearings under varying load and rotating speed were researched.
对各典型状态滚动轴承在不同转速和载荷下的声发射信号进行了振动分析，研究了滚动轴承的损伤振动随转速和载荷的变化规律。
Based on the vibration analysis of AE signals under varying load and rotating speed, the patterns of damage vibration of rolling element bearings under varying load and rotating speed were researched.
应用推荐