通过对常用支撑结构的力学分析与性能对比，选用简支梁作为压力传感器敏感变形机构。
After analyzing and comparing the performance of normal bracing structures in mechanics, we use a freely supported beam for sensing deforming structure.
如果我们信任夸张变形的手法的话，机构的估值并不会因为时候采用债务或股份来评估而发生改变。
If we are to believe Modigliani and Miller, firm valuation is not determined by whether the firm is capitalized by debt or equity.
通过算例，分析了机构的弹性变形和各随机参数对机构运动功能可靠性的影响。
Through an example, the influence of the elastic deformation and each random parameter on the mechanism reliability of motion function is analyzed.
高膛压闭气机构的设计原则是避免构件发生塑性变形。
Design principle of Obturation mechanism in high pressure is to avoid structural component from plastic deformation.
为了保证空间可展结构可靠运行，在展开过程分析中需同时考虑机构运动和弹性变形。
In order to ensure structural reliability of deployable structures in orbit, the hybrid analysis of its mechanism motion and flexible deformation is required.
电池内部具有保护机构和保护电路可以避免发生危险。不合适的拆装将会损坏保护功能，将会造成电池发热、冒烟、变形或燃烧。
The internal protection devices and circuit inside batteries can avoid possible dangers. Improper disassembly will damage the protection function and causes heating, smoking or burning.
分析中可考虑体系的弹性变形、内部机构和刚体运动。
The elastic deformation, the inner mechanism and the rigid motion of systems can be properly considered.
起重机构的门架不得有变形或脱缝脱焊现象。
The gate of a crane should not have deformation, seam slippage or wielding off.
船舶在波浪中航行时，船体总弯曲变形会使沿船体纵向布置齿轮机构的轴承支座中心距产生缩减。
When sailing in waves, ship hull total bending deformation will reduce the center distance of gear backing radially arranged in ship hull.
配气凸轮传统的设计方法是把配气机构看成绝对刚体，不考虑它在运动时的弹性变形，这种设计也称为静态设计。
Valve gear is regarded as stiffness in the traditional design and its elastic deformation in motion is neglected. This method is called static design.
在水面舰艇机械的传统设计中一般不考虑机架伸缩变形对机构运行的影响。
The influence of engine frame distortion on crank rocker operation is not taken into account in traditional surface vessel design.
作者将超声振动引入薄壁镜筒零件车削中以减少零件变形，并开发出了适用于振动切削系统的刀尖高度调节机构，最后给出了超声切削和普通切削的对比数据。
The author apply ultrasonic vibration to the turning of thin-wall pieces to reduce the deformation, and an tools-tip height adjustment mechanism adapted to the vibration cutting system was developed.
当强调的是适用于任何坚实的机构，该机构的变形将导致。
When stress is applied to any solid body, deformation of that body will result.
在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
性质与材料结构之关系及变形与失效机构。
Relationship of mechanical behavior to material structure and mechanisms of deformation and failure.
移动导杆机构是平面四杆机构的一种变形形式。
Moving leader mechanism is a special style of the planar four-bar mechanism.
柔性机构中柔性构件变形的动态响应为高度非线性。
Deformation dynamic response of flexible mechanism is a nonlinear process.
分析了离心自毁机构套座锥面和击发体表面的变形对自毁性能的影响。
This paper analyzes the effect of the deformation of the conical surface of the sleeve and surface of the percussion body in a centrifugal self destroying device upon self destroying performance.
针对某行星变速机构复合排行星齿轮和滚针轴承进行了受力变形分析和损伤率计算。
The paper analyzed the deflection of a compound planetary gear set and calculated the damage percentage of its roller bearing.
采用连杆机构垂直提拔，方便迅速，模板不变形。
Operation is conveniently and quickly, and die cutting plate will not deform.
以柔性机构的变形边界与目标边界间的最小平方差(LSE)为优化目标。
The objective for the optimization is to minimize the least square error (LSE) between the deformed boundary and the target boundary.
本文提出了一种新型的变形体镗头方案，在该方案中，压电陶瓷驱动柔性铰链机构实现镗刀的径向进给。
This thesis puts forward a new solution of deformed boring-head, in which piezoelectric drives flexible hinge mechanism to realize radical feed.
并结合实例，运用变形梯形加速度运动规律，通过微机计算，得出了该凸轮机构从动件的分度误差曲线。
With an example given, index error curve is obtained by applying acceleration law of deformed trapeze on a computer.
介绍了一种实用的内侧槽抽芯机构，可利用螺旋形弹簧钢板的顶出变形实现内侧抽芯，并阐述了抽芯机构的工作过程和关键技术。
A practical mechanism for the core-pulling of inside groove was presented. The core-pulling was achieved by applying the deformation of helical spring steel sheet during the ejecting process.
考虑到索穹顶结构属于动不定结构体系，文中还对动不定体系的求解过程进行了详细的推导，同时采用建立在大变形基础上的变形协调方程来求解结构体系的有限机构位移。
As the cable dome is a kinematically indeterminate system, its solving process is also derived in detail and the equations, which are based on large distortion, are adopted to solve the problem.
最后对大变形柔顺机构的驱动特性进行了初步分析。
Finally, the actuation characteristic of large-deflection compliant mechanisms is analyzed as a primary study.
高压开关在合闸时，触头碰撞会产生很大的冲击力，不仅对操动机构造成很大震动、使触头及杆件弯曲变形，而且会造成碰撞后，触头产生弹跳。
It not only makes the operating mechanism shocked hardly and the contactor and poles distorted, but also cause the bounce of contactor after the impact.
空气弹簧是利用其内部压缩空气所产生的反力、随其变形而引起的有效受压面积增加所产生的反力、或两者合力抵御外力的一种弹性机构。
Air spring is a elastic mechanism that using the reactive force of compressing air, reactive force of raising effective area for the deformation and the resultant of above two forces.
空气弹簧是利用其内部压缩空气所产生的反力、随其变形而引起的有效受压面积增加所产生的反力、或两者合力抵御外力的一种弹性机构。
Air spring is a elastic mechanism that using the reactive force of compressing air, reactive force of raising effective area for the deformation and the resultant of above two forces.
应用推荐