设计并生产汽车，卡车，客车及跑车发动机水泵用的机械密封件。
Designs and manufactures of mechanical seals for water pumps applied in engines for cars, trucks, buses and sport cars.
文章论述一种汽车发动机水泵性能计算机测试系统中流量的控制方法。
A control method for flow is developed in a computer measuring system of automobile engine pump performance.
这种装置叫做“便携式通用轻型堵漏包”（其英文缩略语为PLUG，正好有塞子的意思）。 它是由聚酯纤维和聚氯乙烯制作的圆柱形气球，并安装了发动机带动的水泵。
The Portable Lightweight Ubiquitous Gasket (PLUG) is a sausage-shaped balloon made of polyester and PVC, and fitted with motorised pumps.
相反地，诱导式发动机可以自冷却，这样就省去了笨重的散热片、冷却风扇、水泵和与此相关的铅用品制造。
An induction motor, by contrast, can be cooled passively-and thereby dispense with the hefty radiator, cooling fan, water pump and associated plumbing.
这种扭曲将海水泵进一个发动机，就产生了电能。
The bending pumps hydraulic fluid through a motor, which generates electricity.
水泵就是一个简单的离心泵，用皮带连接发动机上的曲轴。发动机无论何时运转水泵都能循环起来。
The water pump is a simple centrifugal pump driven by a belt connected to the crankshaft of the engine. the pump circulates fluid whenever the engine is running.
介绍了汽车发动机冷却水泵密封性能试验台系统设计方法，实现汽车冷却水泵密封性能测试系统的自动化、智能化。
This paper introduced the system design methodology used for automobile water pump seal performance testing, and realized of automation, intelligent for testing it.
大容量水泵，水冷机油冷却器和双圆环型散热器风扇确保最佳发动机的冷却效率。
Large-capacity water pump, liquid-cooled oil cooler and twin ring-type radiator fans ensure optimal engine cooling efficiency.
该系统主要由发动机、节温器、散热器、水泵以及空气冷却系统组成。
Engine, thermostat, radiator, pump and the air passage are included in the model.
经过台架试验和整机装车试验，证明用GFRPPS制造的发动机冷却水泵部件能满足使用要求。
The platform test and test in which the whole machine was put in the vehicle proved that the property of engine's cooling water pump parts made of GFRPPS meets the demand for use.
水冷系统由发动机水套、节温器、水泵、散热器(水箱)、散热器盖、风扇、风扇驱动皮带和必要的软管组成。
A water-cooling system consists of the engine water jacket, thermostat, water pump, radiator, radiator cap, fan, fan drive belt and necessary hoses.
分级燃烧，避免了浪费燃料或氧气通常用于驱动发动机与传统的燃气发生器循环水泵。
Staged combustion avoids the usual waste of fuel or oxygen used to drive the pumps in an engine with the conventional gas-generator cycle.
适合排水水泵，灭火器泵，压缩机冷藏车和液压泵用于建筑设备驱动的发动机。
Suitable for drain pumps, fire extinguisher pumps, compressors for refrigerated vehicles and hydraulic pumps used in construction equipment driven by engines.
当酒吧的建设完工时，一台带发动机的水泵被安装进来。
When the construction of the pub was completed, a pump with an engine was put in.
介绍了用于发动机冷却水泵的试验装置。
A testing apparatus for the cooling pump used in an automobile engine is introduced in this paper.
发动机配件类：齿轮室、气门室罩盖、链轮室罩盖、预热器座、水泵泵盖、进气歧管、泵箱；
Engine fittings series:Gear chamber, Cavaera cover, Sprocket rooms cover, Preheaterbase, Water pump Cover, Intake manifold, Pump box.
应用CFD模拟分析软件FLUENT对498发动机冷却水套内的流场进行模拟计算，研究分析了水泵内流场对发动机内冷却水流动的影响。
The numerical simulation on fluid flow in cooling water jacket of 498 diesel engine is performed using computational fluid dynamics (CFD) software FLUENT.
水泵由发动机曲轴上的皮带驱动，使冷却液在散热器与发动机水套之间循环流动。
The water pump, driven by a belt from the engine crankshaft, circulates the cooling liquid between the radiator and engine water jackets.
开发和生产汽车行业发动机传统水泵及可调式水泵、油泵、冷却模块、变速箱油泵，以及工业工程领域应用的机械密封。
Development and production of conventional and adjustable water pumps and oil pumps, transmission oil pumps and modules for the automotive industry and mechanical seals for industrial engineering.
泵的入口靠近中心，因而能使从散热器回来的液体流到水泵的叶片。叶片将水甩出，进入发动机。
The inlet to the pump is located near the center so that fluid returning from the radiator hits the pump vanes.
发动机风扇通常安装在水泵轴上，由驱动水泵和发电机的同一条皮带驱动。
The engine fan is usually mounted on the water pump shaft and is driven by the same belt that drives the pump and the generator.
谷物联合收获机传统的冷却方式是由发动机曲轴以定传动比形式驱动冷却风扇和水泵运转的，这种冷却方式经常出现低速大负荷时冷却不足、高速小负荷时冷却过度等问题。
The driven force of fan and pump in the traditional way of the cooling system in cereal combining harvesters comes from crankshaft of the engine by decided transmission ratio.
三缸内燃式水泵是将发动机与柱塞式水泵的结构原理与技术融会一体形成的一种易于产业化的新型动力装置。
The internal combustion pump integrates the technologies of internal combustion engine and water plunger pump besides that as a new product, it can be industrialized easily.
海纳机械有限公司是从事汽车零部件生产的专业制造商，主要生产发动机冷却水泵，排气管。
Hana Industries Co. , Ltd. specializes in manufacturing auto parts including water pump and Exhaust Manifold esporting to USA and European market for more than 10 years.
水泵由发动机曲轴上的皮带驱动，使冷却液在散热器与发动机水套之间循环流动。
A cooling device, as in automotive engines, through which water or other fluids circulate as a coolant.
水冷却器的通风设备及循环水泵由液压发动机控制。
The ventilator for the water cooler and the circulating pump is driven hydraulically via a hydraulic motor.
水冷却器的通风设备及循环水泵由液压发动机控制。
The ventilator for the water cooler and the circulating pump is driven hydraulically via a hydraulic motor.
应用推荐