根据仿真实验得到的控制规律和提出的双反馈控制原理进行了系统的软件设计，并对设计装置进行了实验室功能调试。
On the basis of introduction of the control rules, the paper makes the software design and makes the experiment function debugging.
对电源中的反馈控制回路的工作原理和技术特点进行了详细分析。
We analyze the working principle and technical characteristics of the feedback control loop in this power supply in detail.
介绍了特征声信号的提取方法及其用于激光焊接金刚石锯片的反馈控制系统构成和基本原理。
A method to obtain the diagnostic signal, the acoustic feedback control system and the principle of laser welding diamond saw are described in the paper.
简介几种常用电机调速方式。对应用较好的内反馈高频斩波调速技术的工作原理、功能与特点，以及在工业控制中的应用情况予以介绍。
The article mainly the speed governing technology with internal feedback high frequency chopper wave, including its working principle, function and feature, and application to Industry control.
将加工尺寸预测与工艺能力预测结合起来，提出对加工尺寸进行反馈补偿控制的原理和方法。
Combining the forecasting of machining dimension with that of process capability in a machining process, principle and method of feed-back compensative control is proposed in the paper.
首先提出了该主动阻尼悬架的实现模型，该模型是在传统的液力减振器的基础上，应用半主动控制的思想，结合力反馈的原理建立起来的内部液压反馈阻尼网络模型。
And physical embodiments of the concept are proposed, which are hydraulic damping network models established on the base of inner force feedback principle and combined with semi-active control scheme.
在此基础上，应用输出反馈原理和合理的性能指标函数设计出系统的最优控制律。
Accordingly, the principle of output feedback is used to design an optimal control law for the system in terms of a reasonable performance index.
结合分离原理和一种直接构造的方法，我们得到了显式的最优控制，它是状态滤波估计的线性反馈。
Combining the separation principle with a direct construction method, we get the optimal control which is the linear feedback of the state filtering estimation.
运用模糊控制原理，设计了横摆角速度反馈控制模糊控制器和质心侧偏角反馈控制模糊控制器。
Based on fuzzy control principle. The fuzzy controller of feedback control of yaw rate and the fuzzy controller of feedback control of side slip Angle were designed.
在分析了单相逆变器的连续时间和离散时间模型之后，详细介绍了逆变器的增广状态反馈控制的原理和设计方法。
The theory and design method of state-feedback integral control technique for inverter are introduced particularly after analyzing the continuous and discrete models of the single-phase inverter.
本文讨论了建立四反射镜环形反馈系统的有关问题，探讨了利用环形反馈系统控制图象对比度变化的原理。
This paper studies the establishment of four-mirror circle feedback system and the principle of controlling contrast changes of the image pattern by this system.
由于模型中存在参数的不确定性，利用定量反馈理论原理，设计了变速器输入轴速度鲁棒控制系统。
Owing to the existence of uncertainty in the model, a robust control system of transmission input speed is designed using quantitative feedback theory.
该文采用一种新的全极点逼近法，设计基于内模原理的PID反馈控制，只需调整一个参数。
This paper using a new method of approaching the all-pole approximation, designing based on IMC-PID control just need adjusting one parameter.
而基于免疫反馈原理的模糊免疫PI控制使系统具有一定的自适应能力和较强的鲁棒性，其控制性能优于常规的PI控制。
Fuzzy immune control based on the theory of immune feedback, can make the system having definite adaptive capability and robustness, also its performance will be superior to conventional PI control.
通过对包钢给水厂澄清水处理系统的自动控制原理分析，论述了以原水流量为前馈、以SCD为反馈的自动优化投药系统的可行性和优越性。
It discusses the feasibility and advantages of the automatic optimization dosing system, which regards the original water flow as the feedforward and the SCD as the feedback.
本文阐述了其反馈控制基本原理及系统静、动态性能的数学分析和试验研究结果。
The basic principle of feedback control and mathematical analysis of the static and dynamic property, as well as the experiment results...
基于微分方程不变性原理，我们提出了一个简单、系统、严格的自适应反馈控制器来非线性地稳定任何混沌系统。
Based on the invariance principle of differential equations a simple, systematic and rigorous adaptive-feedback controller is proposed to stabilize nonlinearly any chaotic systems.
同时在控制电路设计上引入流量补偿反馈的恒功率控制，并分析了系统的工作原理及输出特性。
At the same time, constant power control of flow compensating feedback is adopted in the design of control circuit. Work principle and output characteristics of the system are analyzed.
以维纳的控制论为指导，阐述负反馈教学法的基本原理，并建立模型。
According to Wiener's cybernetics, author deduces the fundamental principle of negative feedback teaching and builds model.
研究了电容反馈互导放大器（CTIA）型红外读出电路的数字控制部分的工作原理，并针对CTIA这一特殊结构的读出电路，提出了一种基于计数器的数字控制电路结构。
This paper studies on the digital controlling principles of CTIA readout circuit, then puts forward a novel structure of the digital circuit of CTIA readout circuit based on counter.
提出采用连续继电反馈实验辨识高精度的过程模型，基于内模原理设计PID控制器的方法。
The use of sequential rely feedback tests for system try to obtain a more accuracy process model, to design PID controller method based on the internal model control principle is presented.
该模型的反馈机制及自调反馈控制、前馈复合控制的原理与方法均详细论述。
The feedback function of the model and the principles and techniques of a self-feedback control and an advances - feedback complex control also have been detailed.
讨论了使用综合阻尼力矩求解线性最优励磁控制器的状态反馈系数的原理，它较经典的庞特里亚金法易懂。
The principle of using comprehensive damping torque to solve feedback gain of linear optimal excitation controller is presented.
文中讨论了条件反馈控制器的基本原理、结构以及设计方法。
The basic principle, the construction of conditional feedback controller, and the design procedure are discussed.
反馈——控制原理；
利用动态规划原理，给出了脉冲最优控制的反馈形式和值函数的显式表达式；
Via a dynamic programming, the optimal impulsive control is given in its feedback form, and the value function is given in its explicit form.
采用了双环控制结构，先构造内环状态反馈以改善对象动态特性，然后按照内模控制原理设计外环的控制器。
First, the state feedback is used to improve the process static and dynamic performance. Then, the controller is designed based on the internal model control principle.
从预测模型、反馈校正和优化控制三方面对预测函数控制基本原理进行了系统的阐述并针对一阶加纯滞后对象推导了单变量预测函数控制的基本算法。
The principle of PFC is introduced from three aspects: predictive model, error compensation and optimal algorithm. The basic PFC algorithm for first-order plus time delay system is developed.
阐述了系统变量脉冲反馈控制法的基本原理和新方法的算法过程，并从理论上对该方法的有效性进行了严格论证。
The principle of the method of pulse feedback of systematic variable is explicated. On this basis, algorithm procedure of the new method is demonstrated, and its validity is theoretically proved.
这是因为在相关实验中的控制器算法设计在基本原理上具有一致性。所应用的控制算法包括PID、模糊、DMC预测控制以及对象过程特性的继电反馈辨识。
In succession, the paper introduces the control algorithms used in experiment, which include PID control, fuzzy logic control, DMC predictive control and relay feedback identification.
应用推荐