且微粉化过程无结合溶剂损失及晶型转化发生。
No loss of combined solvent or crystal form transformation were observed during micronization.
接合部组织由晶界铁素体及晶内上贝氏体组成。
Themicrostructure of bonded zone consist of upper bainite and grain boundary ferrite.
本文研究了搅拌速度及晶种粒度对晶体附聚的影响。
The influence of agitation and crystal size on the agglomeration have been investigated.
在晶体加工中，特殊晶向及晶体棱镜的切割一直是困扰加工者的一大难题。
It is always a great difficult around fabricators to cut the special orientation and prism of crystal in the cutting process.
但与淬态试样相比，玻璃转变温度、晶化温度及晶化峰值温度存在一定的变化。
But compared to as-quenched samples, the glass transition temperature, crystallization temperature and crystallization peak temperature have same changes.
用高分辨电子显微镜对铬酸镧的晶体结构及晶界、位错等晶体缺陷进行了观察与分析。
The crystal structure and some defects such as tilt boundary and dislocation of lanthanum chromates were investigated by high resolution microscopy (HERM).
HAZ组织中IAF相对数量及晶界铁素体的形态是影响HAZ强韧性的决定性因素。
The relative amount of IAF and the morphology of grain boundary ferrite in HAZ were the decisive factors affecting the strength and toughness of HAZ.
晶粒粗大及晶间网状铁素体强烈降低材料的裂纹扩展阻力，并极易导致裂纹的失稳扩展。
Coarsening grain and intercrystalline network ferrite depress crack growth resistance of the materials strongly and result in unstable propagation of crack very easily.
用SEM、XRD分析了钛酸锶粉体的形貌及晶相；并进行了化学分析和ICP测试。
Strontium titanate powder prepared is characterized by scanning electron micrograph (SEM) and X-ray diffraction (XRD) and is analyzed by chemical analysis, ICP and IR.
主要储集空间类型为宏观裂缝、溶洞、溶孔及晶间孔缝，宏观孔缝是连接储集空间的通道；
The main reservoir space style are macroscopic cracking, solution cavity, corroded hollow and inter-crystalline suture. The macroscopic suture is the passage of reservoir space.
利用X射线衍射仪和示差扫描量热计（DSC），研究该非晶薄带的非晶特性及晶化过程；
The amorphous ribbons and their crystallization processes were identified by differential scanning calorimeter (DSC) and X-ray diffraction (XRD).
用TEM、XRD等方法研究了蒸发法制备的纳米铜粒子真空烧结后粒子尺寸及晶相的变化。
TEM, XRD were used to study the changes on particle size and crystal phase of nanometer copper after sintering in vacuum.
无论是淬火或淬回火态的试样其热疲劳裂纹主要沿着碳化物与基体脱开处及晶界裂纹桥接而扩展。
The thermal fatigue crack propagated mainly through the break-age of the interface of carbide and grain boundaries for either quenched or quenched and tempered steel.
通过测量样品的起始磁化曲线、小回线及回复曲线，分析了样品中的磁化行为及晶间交换耦合作用。
The magnetization behavior and inter-grain exchange coupling of the ribbons were studied in terms of the initial magnetization curves, the minor hysteresis loops and the recoil loops.
所述结构可具有较不复杂的聚焦、减小的串扰、较紧密的像素组装密度、提高的量子效率及晶 片级封装。
The structure may have less complex focusing, reduced crosstalk, tighter pixel packing density, increased quantum efficiency, and wafer-level packaging.
探讨了反应温度、空气流量、搅拌速度、碱比、初始混合状态等因素对晶种制备过程中氧化速率及晶种形态的影响。
The effect of temperature, air flow rate, stirring speed, initial mixing condition on the reaction rate and the speed form have been studied systematically.
国内产品在纯度、晶体粒度及晶型等方面与国外同类产品存在较大的差距，因而在国际市场竞争中处于不利的地位。
Because of visible qualitative shortages in purity, crystal size and morphology, domestic GMP products are at a disadvantage in international market competition.
通过三个体系的比较，PLMN -PZT四元系材料适中的四方度、晶粒尺寸及晶界处锰的析出是它具有良好压电、介电性能的结构基础。
Their piezoelectric and dielectric properties relate to the structure characters such as suitable tetragonality, moderate grain-size and Mn ions distributed on the grain boundary.
作为世界第一，晶能光电发明并为南昌市的八一大道，两条马路及10条小巷提供高效LED照明解决方案。
As a world first, Lattice Lighting developed and provided a qualified LED lighting solution to BaiYi Boulevard, two way ten lane in Nanchang city.
具有纳米晶、过饱和固溶体等亚稳态结构的材料具有独特的物理、化学及机械性能，因而在诸多领域获得了广泛的应用。
The materials with metastable structures, e. G., nanostructure and supersaturated solid solutions, have unique physic, chemical and mechanical properties, and get extensive application in many fields.
本研究对以钙云母为主相的可切削微晶玻璃的制备工艺、结构特点、增强增韧机理及力学性能等进行了初步的研究。
The study on preparation process, microstructure, strengthening and toughening mechanisms of MGC mainly containing Ca-mica were investigated, together with mechanical properties and machinability.
我弘扬流晶光之火焰，带来摩诃若多射线之真理、喜悦、爱及怜悯…以在大千无尽世界之楼宇中疗愈万物。
I carry forth this Flame of Liquid Light, bringing forth the Truth, Joy, Love and Compassion of the Maharata Ray... for the Healing of the Worlds, in the House of Many Mansions.
利用光学显微镜对中碳钢退火孪晶的形态及形成机制进行了研究。
Morphology and forming mechanism of annealing twin in medium carbon steels have been studied with optical microscope.
铁及锌的掺杂会降低锐钛晶向金红石的转变温度。
Iron and zinc doping can lower the transformation temperature of anatase to rutile.
现时只有一些大型公司及无晶圆设计公司内设有集成电路设计小组，但为数不多。
At present, only a small number of IC design teams can be found in certain big companies and in fabless design houses.
影响猪油干法分提参数有：结晶温度、冷却速率、养晶时间、搅拌速率及分离方式。
Parameters effecting on dry fractionation of lard are crystallization temperature, cooling rate, crystal growing time, agitation rate, separating manner.
而粗大的晶粒及连续的晶界容易产生应力集中，因此合金经固溶时效后具有较低的塑性和冲击值。
However, large grain size and continuous grain boundaries combine to produce stress concentrations, thus lowering the plasticity and impact value of alloy after solution and aging treatment.
而试样中的含量对于该玻璃的分相机制及析晶种类有很大的影响。
But the content of has significant effect on the mechanism of phase seperatin and the types of crystalline .
但纯锡电镀中存在着许多问题，如锡晶须、镀层变色及镀液混浊等。
However, it suffers from some problems such as tin whisker, surface color changes and bath mudding.
但纯锡电镀中存在着许多问题，如锡晶须、镀层变色及镀液混浊等。
However, it suffers from some problems such as tin whisker, surface color changes and bath mudding.
应用推荐