设计：足底压力测量系统设计及病例对照研究。
Design: Design of measuring system for plantar pressure and a case controlled trial.
本课题的主要任务是完成一个高精度的温度、湿度及压力测量系统。
The chief task of the subject is to build a high precision temperature, humidity and pressure measuring system.
选用一个压力测量系统作为实验例证，验证了本文所述方法的实用性和可行性。
Through the experiments in a pressure measurement system, the feasibility of this method is proved.
本文提出一种新的控制测量方案，采用压力变化速率控制系统和压力测量系统。
This paper presents a new plan for control and measurement, the control system of which is a rate of change of pressure control system and the measurement system is a pressure measurement one.
本文采用了压电传感器和NI公司的测试技术等新方法，来设计足底压力测量系统。
This system is designed using a series of piezoelectricity transducers and the measurement technology of NI Company.
本文以大量试验为依据，提出质量流动的新观点以解决内燃机气缸压力测量系统的通道效应。
According to a lot of experiments, this paper advances a new viewpoint of Mass Flow to solve the passage effect of engine cylinder pressure measuring system.
介绍了一种新型的直接数字测量法智能化电容式压力测量系统的测量原理、系统构成和特点。
The measuring principle, the system formation and the features of a new type intelligent pressure measuring system on the basis of the direct digital measurement are introduced.
谭先生带领队员研制暑热压力测量系统，于短短数月时间内，为2008奥运马术比赛气象观测做好准备。
Mr. TAM led a team to develop the Heat Stress Measurement System within several months, setting the ground for weather observations for the 2008 Olympic Equestrian Events.
电机的安装和调整，以允许自由垂直运动，连接到会议厅的压力测量系统发了言，和石油的缓冲系统填补。
The motor was installed and adjusted to allow free vertical movement, connections to the chamber pressure measuring system were made, and the oil buffer system was filled.
光学压力测量与电子压力扫描结果的对比表明所建立的光学压力测量系统可用于内流场测量，其精度达到了工程应用水平。
The contrast of both results from PSP and ESP have revealed the feasible capability of PSP application in internal flow fields and indicated that for the usage in practical industrial engineering.
摘要介绍了鞋垫式足底压力分布测量系统中压电陶瓷力传感器的设计过程。
The design process of the piezoelectric force sensor in the insole plantar pressure distribution measurement system was introduced.
本系统能够完成发动机的转速、转矩的高精度控制与测试，以及发动机温度、压力、油耗等指标参数的测量。
This system can complete the engine rotational speed and torque high accuracy control and the test, also engine temperature, pressure, oil consumption parameters survey.
冲击过程中的接触载荷由压力传感器及数字信号处理系统实时测量。
The contact force during impact process was measured by force sensor and data signal processing system in real time.
有些系统还需预留测量水温、水位、压力的开口。
Some systems also need to be reserved for measuring water temperature, water level, pressure openings.
用于标准系统双值和单值压力测量仪器，是为了满足带有压缩空气式制动器车辆压力测量，而专门研发的。
The double and single pressure measuring instruments in the standard systems were developed specially for the measurement of pressure in vehicles with a compressed air brake.
足部压力分布测量系统的研究。
介绍了鞋垫式足底压力分布测量系统中压电陶瓷力传感器的设计过程。
The design process of the piezoelectric force sensor in the insole plantar pressure distribution measurement system was introduced.
分析了流体动态特性实验台架本身的自循环特性对海水管路系统中脉动压力测量的影响。
This paper analyzes the influence of the test device cycling characteristic for fluid dynamic characteristic on the pulsation pressure measurement in seawater pipeline system.
该系统以菜单形式实现地质探头的系数标定、土层压力的测量。
This system implemented factor demarcation of geological sensor, data measurement of earth pressure in the menu form.
本文描述了一种测量压力传感器系统频响用的正弦液压发生装置。
A sinusoidal fluid pressure generator for measuring the frequency response of pressure transducer system is presented.
系统主要包括超声波发射接收部分、压力测量部分、数据采集部分、单片机及上位pc机控制部分。
The system consists of the transmitting and receiving ultrasonic, measuring pressure, collecting data, and controlling of Single Chip Micyoco and PC mainly.
结论：足底压力分布测量系统稳定、灵敏度和分辨率高、结果可靠、操作简便。
CONCLUSION: The measuring system for plantar pressure distribution has high stabilization, sensitivity and differentiability, and can be operated reliably and simply.
采用电荷耦合、提高放大倍数、降低量程等误差修正技术，提高了系统抗干扰能力和温度、压力测量数据的精度；
The robustness of system, the precise of temperature and pressure are observably improved as charge coupled, increase the amplification constant, decrease measure scope, etc.
对主蒸汽压力控制系统、床温测量系统、床温校正系统和主燃料跳闸的动作条件进行了详细的分析。
The main steam pressure control system, bed temperature measure system, bed temperature adjust system and action condition of main fuel trip (MFT) are analyzed.
本论文基于虚拟仪器概念，组建和开发了压力脉冲固态发酵反应器的测量和控制系统。
This thesis deals with the development of novel SSF bioreactor with air pressure pulsation. Measurement and control software was developed under virtual instrument concept.
本论文基于虚拟仪器概念，组建和开发了压力脉冲固态发酵反应器的测量和控制系统。
This thesis deals with the development of novel SSF bioreactor with air pressure pulsation. Measurement and control software was developed under virtual instrument concept.
应用推荐