针对当前单片机实验设备的现状，研制了一套便携式单片机diy实验板。
Aimed at the problems existing in lab devices for single chip microcomputer module, a portable DIY lab device with single chip microcomputer is developed.
分析了TSC51单片机实验仪的工作原理，阐述了KeilC51编译器编译工作过程。
The operation principle of TSC51 Single Chip Micyoco(SCM) experimental device and the compiling process of KEIL C51 were analyzed.
本文介绍了一种用于单片机教学实验的辅助装置。
A support device for single chip computer teaching experiment is introduced in this paper.
单片机控制的智能密码锁，我自己做的一个实验，希望对大家学习有用。
SCM smart locks, I have to do an experiment, and they hope to learn useful to everyone.
单片机实时完成量化控制。实验中通过串行通信接口输出编码系统的控制结果。
The single chip processor accomplishes quantify control in real time, the coding system's controlling results is outputted through the serial interface port.
文章根据单片机和FPGA相关课程的教学要求，详细介绍了电子综合实验设备的设计思路、构架、结构特点以及用途。
This thesis introduces the design thought, composition, characteristics and usage of electronics synthesis experimental equipment in detail, according to the teaching demand of SCM and FPGA courses.
根据理论分析，笔者在现有实验条件下，分别基于单片机与PCI数据采集卡，设计出两种误差检测与补偿系统。
According to theoretical analysis, the authors designed two error detection and compensation systems that based on microcontroller and PCI data acquisition card with the current experiment conditions.
实验结果表明，基于C8051高速单片机的磁悬浮轴承数字控制系统具有稳定性好、响应快及低噪声等优点。
The experimental result shows that the C8051 MCU based digital magnetic Levitating bearing control system features advantages of high stability, fast response and low noise.
对基于PLC与单片机双平台控制的开放式机电教学实验设备的组成、特点及用途等作了较详细的介绍。
The composition, characteristics and usage of opening experimental equipment of mechatronics based on double stage of both PLC and SCM were introduced.
本文介绍了系统的组成，详细分析了单片机的控制作用及实验结果。
This paper introduces system composition and carefully presents single chip computer's control function and test results.
该单片机集成度高、硬件结构紧凑并采用浮点数运算，实验证明，整个系统的快速性与可靠性均较理想。
It's proved by experiment that the whole system has a high speed and good reliability, because the single chip computer has high integration, compact hardware structure and floating number.
提出一种PIC单片机的教学实验装置。
This paper presented a PIC single chip microcomputer experiment device.
利用8032单片机实现船舶燃油锅炉自动控制，工作稳定可靠，实验证明该系统可显著提高锅炉控制性能。
A Marine oil-fired boiler control system using 8032 micro-controller can work steadily and reliably, Experiment prove that it can improve control function of boiler.
由单片机控制步进电机的步进时间，实现了实验模型按正弦规律同步地平动和转动。
By using a microcontroller to control the step time of two stepper motors, sinusoidal motions of heaving and pitching in phase for the experimental model are obtained.
实验表明，此协议能正常运行基于AT 89s52的单片机网络上，具有相当高的网络可靠性，极大地提高了处理速度和效率。
Experiments indicate that this protocol can run well on the networks based on "AT89S52" with high reliability, and that it can improve the processing velocity and efficiency greatly.
实验结果表明本方法直观，易于用8位单片机实现。
The experimental results show that it is suitable for 8-bit single-chip microcontroller implementation.
本文简要分析了高职院《单片机原理及应用》的教学现状，并就课程的教材、实验及学习方法等方面进行了探讨。
This paper introduces simply the present state of the teaching of single chip microcomputer in High Vocational College and also gives some opinions on the teaching.
介绍了自行研制的MCS 51/96单片机教学实验装置，并对其中的几个关键技术做了一定的分析研究。
This article introduces the MCS51/96 monolithic integrated circuit teaching test equipment, and analyses(several) essential technologies.
最后，本文利用基于MCS196 KC单片机开发系统对第二种控制方案进行了仿真分析及实验研究，实现了控制系统的稳定运行，并使调速系统具有良好的动静态性能。
At last, the simulating analysis and experimental research for the second scheme are implemented by development system based on MCS196KC chip. The steady running of the control system is realized.
并以单片机控制步进电机为实例，进行了实现凸轮机构从动件多种运动规律的理论和实验研究。
Using a single chip microcomputer to control a stepping motor as an example, the theoretical and experimental research about lots of motion laws of the driven CAM is implemented.
单片机应用技术所涉及到的实验实践环节比较多，而且硬件投入比较大。
The application technology of MCU involved many experiment aspects and the hardware investment is relatively large.
对液压电梯速度反馈单片机控制系统进行了理论设计和实验的研究。
This paper is about the theoretical and experimental research on the speed feedback control systems of hydraulic elevator using single chip microcomputer.
本实验设计了一个以单片机89C51为基本控制核心的简易电流电压信号发生器。
This experiment has designed take monolithic integrated circuit 89C51 as the basic control core simple numerical control direct-current power supply.
本文介绍了基于单片机实现多路开关量控制系统，用于机械原理实验室机构陈列柜演示系统，并用ISD4004系列语音芯片构成语音解说系统。
This paper introduces a switch signal control system based on MCU, which has been used in a mechanism demonstrated system. This system USES ISD4004 series chip to form a voice system.
本实验设计以数字集成电路技术、霍尔传感器、温度传感器为基础，单片机技术为核心。
The experimental design for digital integrated circuit technology, Hall sensors, temperature sensors based on single-chip technology as the core.
实验表明，单片机系统在核电磁脉冲作用下，可出现死机等多种故障现象。
The experiments show that various kinds of failures such as breakup may be occurred when single chip computer system is irradiated by NEMP.
利用串行通信完成了单片机与计算机之间的数据交换，最终实现了计算机对实验台参数的测量和控制。
The serial communication is used to complete the data exchange between single-chip computer and computer, computer measuring and control has been realized finally.
为研究静电放电电磁脉冲对电子系统的影响，进行了静电放电电磁脉冲对单片机系统的辐照效应实验。
To study the effect of ESD EMP on electronic system, we carry out the experiment of ESD EMP on chip microcomputer.
此外，为了在现有条件下进行实验，还对PC机和多个单片机之间的串行通信系统进行了开发。
Additionally the article exploited the serial-communication system between a PC computer and 80c196 Single-chip Microprocessors so that the experiment can be done in existed condition.
为了研究它对单片机的各种效应，利用GTEM室产生的模拟核电磁脉冲，对单片机系统进行了辐照效应实验。
In order to study the effects of nuclear electromagnetic pulse to single chip, we made the irradiation effect experiments by simulative nuclear electromagnetic pulse pro-duced by GTEM Chamber.
应用推荐