根据ANSYS提供的适合导管架平台的单元的特点，归纳出进行导管架平台结构有限元分析的基本过程和基本方法。
According to the characteristics of the unit suit for jacket platform provided by ANSYS, concluded a essential process and method for the jacket platform construction analysis with ANSYS.
在深入分析产品虚拟制造全过程的基础上，提出了基于产品定义单元(pdu)的虚拟产品模型框架。
After analyzing the whole processes of Virtual Manufacturing (VM), a new model framework for mechanical products is proposed, which is based on product definition unit (PDU).
在分析岩体水力耦合过程基础上，根据岩体的基本结构及代表性单元体(REV)是否存在提出了建立水力耦合模型的方法。
Based on analyzing HM coupling processes, the conceptual HM coupled models are proposed according to basic structure of rock mass and concept of representative element volume (REV).
对葡萄酒生产工艺流程工作单元进行危害分析，将HACCP控制体系系统地引入葡萄酒生产管理过程，建立了葡萄酒HACCP工作计划。
Besides, HACCP control system was introduced in the management of grape wine production based on hazard analysis of each processing unit and grape wine HACCP working plan was formulated.
再次，对脆性源、脆性接收者、脆性过程所组成的脆性表现基本单元进行分析；
Then analyze the brittleness unit that is made of the brittle source, brittle receiver and brittle action.
本文介绍了考虑索单元松弛跟踪的空间索桁结构非线性有限元全过程分析方法。
A nonlinear finite element method considering the slack of cable elements is proposed in this paper for analysis of spatial cable truss structures.
给出了包括位移函数、刚度矩阵和荷载矩阵在内的理论分析过程，从而建立了半解析单元法。
Regular functions are set up and semi-analytical element method is constituted. Displacement functions, stiffness matrices and load matrices are presented in details.
在此基础上，在实时审计分析系统的设计部分，依照通用的入侵检测模型（CIDF）对监控事件的产生、用户正常规则库、监控分析过程和响应单元逐个进行阐述。
On the designing part of the RAAS, the generation of events, the normal library of users, the process of detecting and analyzing, and the response units were described based on the CIDF.
该模块可以对物质流、过程单元和总流程提供环境模拟分析，并计算过程方案的环境影响指数。
This module supports environmental analysis for mass stream, process unit and total process flow, then calculate environmental impact index for each process alternative.
结合示例介绍了用动态坐标法直接计算薄壁构件的空间变形，并将其用到弯心不共线的薄壁梁的计算分析中，给出了相应的单元柔度矩阵和力法求解过程。
The thin-walled element with different shear-centers on one section is analyzed and calculated by this method as well, then, the element flexibility matrix is presented.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
对双锥型变截面单元，推导了等截面单元的等效结点荷载公式，介绍了利用子结构分析法得到双锥型单元等效结点荷载的过程。
For elements with tapered ends, the equivalent node load equations can be derived based on those of same cross-section elements and tapered elements according to sub-structure method.
得出的分析结果将有助于决策单元分析输入输出数据的变化，在实际生产过程中有重大意义。
This results is useful for DMU analysis the change of input or output date and meaningful in real production.
阐述了用PLC及其扩展单元实现合成氨厂造气炉制气过程的自动控制和入炉蒸汽的自动调节方法，并对该控制方式的节能效果进行了分析。
The method to control gas making furnace with PLC and its extend units as well as to regulate the steam is expounded in this paper.
过程模型利用模型库中的单元模型建立，通用性强，且又能分析各种具体工艺的特定信息。
As process model is built by unit models in the model base, the system is very adaptive. Besides, it can handle the huge amount of specific process information.
基于上述关系推导了三角形薄板单元的剪力求解过程，然后给出了具体的分析步骤。
Derivation and analytical process of calculating shears in triangular element with finite element methods are given.
该文以现代海战为背景，分析了水声对抗参与单元的技术性能参数及详细作战过程。
Taking the modern sea battle as background, the technical performance parameters and campaign process of underwater acoustic counter participator are studied.
本文利用离散单元方法(dem)分析了三峡水库某公路顺层岩质边坡开挖变形破坏机制及其演变过程，并对工程治理效果进行模拟研究。
DEM is used to analyze the evolvement course of the excavation deformation of a road bedding lithologic slope in the Three Gorges reservoir region, and to simulate the effect of control project.
利用ABAQUS6.5对H型钢的开坯过程进行数值分析，由于单元的严重畸变导致数值分析的异常终止。
The ABAQUS6.5 was used to analyze the H-Shape metal cogging, in which the mass scaling and mesh adaptive was utilized to improve the simulation effectiveness.
结合有限单元法和数学规划法提出一确定地基固结过程中材料参数的反分析法。
Combining finite element method and the mathematical programming technique, a procedure of back analysis of consolidation has been developed.
结合示例介绍了用动态坐标法直接计算薄壁构件的空间变形，并将其用到弯心不共线的薄壁梁的计算分析中，给出了相应的单元柔度矩阵和力法求解过程。
In this paper, the calculation of the space deformation of thin-walled element by "dynamic coordinate method" is explained in detail through an example.
分析了智能网络接口单元的硬件和软件设计过程，介绍了利用智能网络现场控制单元对袋式收尘器进行远程监控的基本原理和方法。
This paper analyzes the designing process of software and hardware for the intelligent network's interface unit, and introduces the basic monitor principles and m...
按有效应力原理并用有限单元法分析砂土的液化过程是国际上近两年来出现的新动向。目前已发表的文献仅限于探讨—维应力状态的地基水平振动问题。
In recent two years there appears a new tendency to analyze the liquefaction of sand using FEM on the basis of the effective stress principle.
应用该方法不需要划分桩土体单元，其分析复杂程度基本等同于弹性地基板基础，且分析过程简洁。
The method did not involve the discretization of the soil or piles and it could be used to analyze piled raft foundation as simply as to analyze raft foundation.
通过接触单元来数值模拟啮合齿的接触过程，建立了基于整体有限元分析的齿啮式快开压力容器塑性载荷计算方法。
The proposed criterion is used to evaluate plastic loads in pressure vessel design by analysis using elastic-plastic finite element analysis to guard gross plastic deformation of pressure vessel.
传统数据包络分析方法在决策单元性能排序方面的主要缺陷，是在效率评价过程中的权重体系不统一。
The current dissertation has studied the rating and ranking problem for universities. The shortcoming of traditional DEA methods in ranking is that the weight systems are not unique.
传统数据包络分析方法在决策单元性能排序方面的主要缺陷，是在效率评价过程中的权重体系不统一。
The current dissertation has studied the rating and ranking problem for universities. The shortcoming of traditional DEA methods in ranking is that the weight systems are not unique.
应用推荐