在设计方案中，采用第四代IPM作半桥主电路，以性能好、功能强的数字信号处理器TMS320 LF 240 X DSP为控制器。
In the plan of design, the fourth generation of IPM is used as the main half-bridge circuit and TMS320LF240X DSP with good performance and strong function is used as a controller.
在设计中，以TL 494作为PWM产生电路输出控制信号，控制开关管的导通状况，在半桥反激式输出的基础上实现了电源的多路输出。
In the design, to produce circuit TL494 as a PWM output control signals, control of the on-switch situation, the half-bridge flyback output on the basis of the power of multi-output.
进一步说明了具有RL分支电路的半主动悬臂梁结构阻尼控制技术的可行性和有效性。
All of this explained that the structure damping control technique of RL shunted circuit is feasible and effective.
基于MR阻尼器的半主动悬架系统主要由MR 阻尼器、弹簧、传感器、控制器及相关辅助电路构成。
In general, a semiactive suspension system based on MR dampersmainly comprises MR dampers, springs, dynamic sensors, semiactive controller andrequired circuits.
采用这一方法，在设计好某一特定类型半规整电路的单元版图和整体结构后，可以比较方便快速地构造出其对应的版图编译器。
Using these methods, a given type of layout compiler can be easily and rapidly constructed when both the layout of leaf cells and the overall structure of the semi regular circuit are ready.
以隔离型对称半桥双向变换器为对象，建立了以原边为参考的4种模式下的简化电路，提出了结合开关函数的状态空间平均模型的建立方法。
For isolated-type symmetry half-bridge bidirectional converter with phase-shifted control, a simplified circuit under 4 modes using the primary windings of transformer as reference object is built.
结果对进一步研究半主动分支电路有一定的参考价值。
The result is available for the further study on the semiactive shunted circuit.
研究了微机中具有代表性的半桥脉宽式开关电源的电路原理和特点，提出了简捷、合理的检修方法和步骤，以及关键测试点的经验数据和波形图。
The circuit principle and features of the typical half - bridge switching power source, the reasonable overhauling methods and steps and the key test data waveshapes in computer are discussed.
利用MOS管、半桥驱动芯片LM27222、栅极驱动变压器等器件，设计了变极性矩形波发生电路。
A rectangular wave generating circuit has been designed with MOSFETs, half bridge driver chip LM27222 and gate drive transformer.
介绍了以半桥串联逆变谐振电路P。
On the basis of halt-bridge, series, converting-resonant circuit P.
本文就半偏法测电表内阻的电源电路对测量的影响进行了分析。
The paper offers an analysis of the influence of measuring power circuit of eletremeter internal resistence by half-deviation on the measurement.
每个主开关电压应力是输入电压的一半，并且全范围实现ZVS而不用附加任何电路。
ZVS is achieved for each main switch without any auxiliary circuit. Voltage stress of each main switch is a half of input voltage.
依据一个半桥逆变电路的实例详细介绍了高频变压器设计的一般方法和步骤，并讨论变压器损耗和温升问题。
The method of design high frequency transformer in half bridge inverter circuit is introduced exampled in detail, besides temperature rise and power loss are discussed.
现代高功率因数电子镇流器结构中普遍采用功率因数校正（PFC）和半桥逆变谐振电路拓扑。
The power factor correction (PFC) and half-bridge inverter circuit topology are commonly used in modern high power factor electronic ballasts.
同轴电缆中的外包铜质或金属辫网组成一半的电路。
The outer copper or metallic braid in coaxial cable comprises half the electric circuit.
本文设计了单相半波可控整流电路，在带不同负载情况下的虚拟实验。
This paper describes the virtual experiment of single phase half wave controlled rectifier with different load.
并以三相半波可控整流电路、滞环比较方式的电流跟踪控制、利用S函数实现空间矢量脉宽调制为例说明了软件的使用方法。
Three-phase half wave controlled rectifier, hysteresis comparison mode current track control, and realization of SVPWM by S-Function are used as examples to describe the usage of the software.
本文的研究工作主要是对压电分支电路阻尼技术应用于柔性悬臂梁的半主动振动控制进行理论和实验研究。
In this thesis, the application of piezoelectric shunt damping technique to semi-active vibration control of a cantilever beam has been investigated theoretically and experimentally.
通过可测性设计，使该电路的测试难度及测试时间减少了将近一半。
By design for testability, both the degree of difficulty in testing and test time are reduced nearly one half.
然而，比CPU核心，更重要的是一半的芯片模具现在采取的图形处理电路。
More important than the CPU cores, however, is the fact that half the chip die is now taken up by the graphics-processing circuitry.
本发明制造的半挠性印制电路板特别适用于例如可靠性要求较高 的车载产品。
The semi-flexible printed circuit board produced by the method particularly suits vehicle-borne products with higher reliability requirement.
由于设计采用了不对称半桥结构，提高了系统主功率电路的容错性。
The system adopts asymmetry half bridge structure, which makes the main power converter fault tolerant.
提出了一种吸声新技术——半被动压电吸声技术，并对其进行了等效电路模型分析。
A novel sound absorption technology, semi-passive piezoelectric sound absorption, is presented and its performance is analyzed used electrical equivalent model in this paper.
本文提出了一种由半波长传输线加载并联串联LC电路构成的多模谐振器并对其在宽带滤波器的应用进行了研究；
Further, a multi-mode resonator composed of a half wavelength resonator loaded with two shunt series LC circuit is also investigated intensive.
一种新颖的具有故障隔离特性的半桥电路结构六相永磁容错电机控制系统。
The invention relates to a novel six-phase permanent magnet fault-tolerant motor control system in a half-bridge circuit structure, which has the characteristic of failure isolation.
该电路拓扑族包括单四象限功率开关式、推挽式、半桥式、全桥式等四种电路。
The circuit topologies family include single four-quadrant power switch mode, push-pull mode, half-bridge mode, and full-bridge mode circuits.
文中介绍了采用单相半桥电路实现可逆整流的方法。
A method is introduced that reversible rectification can be realized with single-phase half-bridge circuit in this paper.
对开关电源电路的常见故障进行了分析，介绍了一种半桥驱动型开关电源电路的故障检修思路和开关电源电路静态检修法。
The paper analyses the common faults of switching supply circuit and introduces a method for fault overhaul of half-bridge switching supply circuit.
该电源采用了IGBT模块构成的半桥逆变电路，它具有IGBT驱动、过压、过流、过热保护及故障锁定功能。
The power supply has the functions of IGBT driver, over-voltage protection, over-current protection, over-heat protection and fault locking.
该电源采用了IGBT模块构成的半桥逆变电路，它具有IGBT驱动、过压、过流、过热保护及故障锁定功能。
The power supply has the functions of IGBT driver, over-voltage protection, over-current protection, over-heat protection and fault locking.
应用推荐