包括机座、安装在机座上的驱 动电机、电控箱和固液过滤分离装置。
The utility model comprises a machine base, a driving motor which is arranged on the machine base, an electric controlled box and a solid-liquid filtration and separation device.
提出了一种用无位置传感器的无刷直流电动机来作为电作动器的驱动电机的思想。
An idea is developed in the paper that position-sensorless BLDC motor is used as driver of EMA, with the advantages of maintenance and reliability besides small size and light weight.
磷尽管发挥的作用较小但也有类似功效，都是为了保护发电机的阀动装置。
The phosphorus plays a similar, though lesser, role in protecting the engine’s valve gear.
事与愿违，这个鼓励并没有发挥混动车的优势，因为混动车在设计时就主要考虑到了频繁起步停车过程时利用汽车发电机制动而将汽车的动能转化为电能储存在蓄电池里面，从而提高了燃油经济性。
Equally perversely, this waiver fails to take advantage of the particular benefits of hybrids, which are built for stop-go traffic where braking recharges the battery and boosts fuel economy.
水电机组在实际运行过程中所承受的各类动载荷是进行振动分析和动态设计的基础数据。
The dynamic load on powerhouse when operating is the basic data of dynamic design and vibration analysis.
指出了步进电机的选择原则、动和运行频率区段的划分。
It pointed selection principle of stepping motor, and divisions of starting and running frequency range.
提出了一种在动载体卫星通信控制系统中，无需空心电机的圆锥扫描测角跟踪方案。
This paper issues a kind of Angle measuring tracking method for conical scan without hollow motor in moving carrier satellite communication system.
本文将围绕IC装备制造领域所面临的实际问题，开展用于扫描的高加速度高精度的宏动直线电机的研究工作。
This article will focus on the practical problems faced by the areas of IC manufacturing equipment, research high-acceleration and high-precision linear motor for scan.
通过初步实践的总结，作者提出随动舵机标准系列的建议线路和对电机设计、装置结构等方面的若干意见。
Through practice, the author suggests some circuit diagrams of rudder steer follow-up system and some opinions about the design of electrical machines.
讨论了如下重要课题：弱非均匀性介质中波的传播方程，湍动加速和磁发电机制。
Important questions are discussed: transport equations of waves through weak inhomogeneous media, turbulent acceleration and magnetic dynamo.
根据测试需要，设计自制了分体式碳刷集流环，对灯泡贯流式水轮发电机转子辐板进行了动应力测试。
A separated collecting ring with carbon brushes was designed and manufactured for the dynamic stress test of spoke plates of rotor of bulb tubular turbine generator.
雨刮器，雨刮臂，雨刮电机，连动杆。
该电厂汽轮发电机组使用了弹簧基础后，既隔离了动载荷，又消除了真空吸力，大大减小了立柱截面尺寸。
After spring foundation are used for the turbine generator units the dynamic load is isolated and vacuum suction eliminated, which has greatly reduced the sectional size of the column.
提出了一种在动载体卫星通信控制系统中，无需空心电机的圆锥扫描测角跟踪方案。
This paper issues a kind of Angle measuring tracking method for conical scan without hollow motor in moving Cartier satellite communication system.
其次，以一个典型的轿车后悬架为例，考虑其实际结构要求及工况，设计了电机作动器原理样机。
Secondly, the actuator prototype is designed based on the rear suspension structure of a typical passenger car with consideration of actual structure and work characteristics.
对于不同原理的发电机失磁保护误动进行了分析并提出了改进措施。
Lost the excitation protection regarding the different principle generator by mistake moves carries on analyzes and proposes the improvement measure.
本文从主电机、分动箱、螺筒螺杆、调速器、进料口等几方面分析了常见故障产生的原因并提出了解决办法。
This text from main electric machine, disport -act box, spiral canister and pole, timing organ, material enter ora and so on analysed the reasons lead common errors and gave solve method.
阐述了步进电机控制原理，利用运动控制器实现了进给系统的联动控制，利用PLC实现了步进电机的点动控制。
The control principle of step motor is exposed, drive control of feed system is carried out by use of motion controller, meanwhile, dot motion control of step motor is also carried out by use of PLC.
介绍了电感式传感器的硬件结构及其实现电机齿槽信号的检测原理，阐述了DSP获取动子位置的计算方法。
The hardware of the inductive sensor, the teeth-slot signals detection principle of long stator, and signals processed with DSP are elucidated.
本机由主动辊、丛动辊、料槽、机架、电机组成。
Take the initiative to roll from the machine, Cong moving roller, trough, rack, electrical components.
目前大型发电机保护装置已经通过了全面的静态测试和动模试验的验证。
This protection for Three Gorges large scale generators has already passed the implement static and dynamic tests.
风幕机的原理首要是以电机股动风轮滚动，构成一道微弱无形的风门来间隔室内的冷暖气，防止冷暖气的丢失。
The principle of primary air curtain machine is to move the wind wheel rolling stock motor, a door to the weak invisible space room heating and cooling, heating and cooling to prevent loss.
本文论述改善同步发电机直流机励磁系统动特性的方法。
This paper describes the improvement of dynamic characteristics of DC excitation system for a synchronous generator.
本文从研制高精度随动系统出发，详细分析了PWM驱动器的数学模型及特性，提出一种简单易行的转速估计器，并在此基础上开发出一种适于中小功率直流力矩电机的新型PWM驱动器。
With a view to develop high accuracy servo system, this paper gives a detailed analysis on mathematical model and character of PWM driver, puts forward a simple rotational velocity estimator.
本文对大型水轮发电机失励磁保护，在动模试验的基础上进行了理论分析；论证了机组在失励和其他特殊运行情况下的基本特性；
This paper, based on the dynamic experiments in the laboratory simulation model, gives a theoretical analysis on loss-of-excitation protection for large hydroelectric generators.
利用绕组电感饱和效应，即由于磁路饱和引起的电感随动子位置角变化的规律，检测表面式永磁直线同步电机动子的初始位置。
Based on the saturation effect of winding inductance, an estimation method of initial position for SPMLSM without a position sensor was presented.
一种车辆用车门后视镜装置，其具有：棘爪板，其设置在其中具有电机致动器的外壳的底部中；
The utility model relates to a car gate rear view mirror device for a vehicle.
旋动调节螺杆使转向臂向主电机反方向移动，继续转动调节螺杆直到动盘与定盘接触，发出轻微金属碰撞声为止。
Turn the adjustment screw so that the steering arm moves away from the main motor. Keep turning until you hear a metallic sound created when the discs come together.
旋动调节螺杆使转向臂向主电机反方向移动，继续转动调节螺杆直到动盘与定盘接触，发出轻微金属碰撞声为止。
Turn the adjustment screw so that the steering arm moves away from the main motor. Keep turning until you hear a metallic sound created when the discs come together.
应用推荐