针对冲压机械的特点,采用计算机仿真和物理模拟,为冲压类机械动态特性分析与研究提供了一种实用方法。
According to the features of the punch machine, we research on the dynamic properties and put forward a practical way by means of computer simulation and physical simulation.
可动态模拟金属实际切削过程中切屑流的形成、卷曲及折断过程,为切屑仿真提供图形可视化支持。
The methods presented above can dynamically simulate the process of chip generation, curling and breaking, giving visualization tools for turning process simulation.
汽车动态仿真器的研制必须建立在驾驶员视觉、触觉、听觉及体感的高逼真度模拟的基础上。
Study of dynamic simulator for motor vehicle must be established on the basis of high fidelity simulation of driver's sense of sighting, hearing, touching and body feeling.
以此为基础,对风机盘管换热器的换热进行了动态仿真模拟,得到了风机盘管换热器换热量随各进口参数扰动而发生变化的一般性规律。
Then, the dynamic heat exchange of a coil heat exchanger was simulated and some conclusions were drawn in terms of its regular laws of heat exchange.
模拟仿真结果表明此方法具有被测量稳定、动态速降恢复快、微张力控制效果好等优点。
The simulation result shows this system has several merits, such as stabilizing the calculated rolling torque, diminishing dynamic speed drop restore time and raising the performance of MTC.
异常高压气井生产动态仿真方法不仅改变了传统物理仿真成本高、过程复杂的缺点,而且具备了计算机仿真模拟的准确性。
The method of abnormally high pressure gas well production dynamic simulation not only changes shortcomings of the traditional physics simulation, which have high cost and the complex process, .
本文在破坏性地震中可能发生的次生毒气泄漏与扩散灾害的数值模拟与动态仿真研究的基础上,分析了影响毒气扩散的主要参数。
In this paper, the numerical simulation and dynamic emulation of poison gas leakage and diffusion that possibly occur in the destructive earthquake are studied.
本文对模拟退火方法进行了改进,以使其适应于离散事件动态系统(DEDS)仿真优化中优化目标值不可精确估计的特点。
The simulated-annealing optimization method is modified, so that it can be used to DEDS optimization designs by simulation in which the objective function values could not be evaluated accurately.
采用直接耦合分析方法,对近邻桥基进行降水施工时的动态降水过程进行三维仿真模拟。
Based on the direct coupling analysis method, spatial responses of bridge foundations during precipitation and the dynamic changes of groundwater table are simulated.
仿真视觉显示器实际现场过程状态,将有助于设计者在设计时,由静态性设计提高到动态模拟性设计的水平。
This new method can simulate the process states of visual display unit in actual scene and would help designers improve the design level from static state up to dynamic simulative state.
该系统能模拟多种负载,且能进行动态加载试验,并对该系统的几种工况进行仿真研究,仿真结果表明该系统动态性能良好,满足设计要求。
It can be used for simulating variety of loads, and doing dynamic loading test. Simulating results indicate that this system possesses good dynamic performances and meets the design requirements.
在自主研发的面向道路交通的高级驾驶模拟器(KMRTS)的应用研究中,动态交通流仿真是影响交通评价实验结果的一个重要因素。
The dynamic traffic flow simulation is an important factor that influences the experiment results for traffic evaluation in the applied research on the full size Driving Simulator (KMRTS).
此外,利用有限元ansys软件对PC B组件在整个红外再流焊炉中的焊接过程建立了实体模型,进行了PC B组件再流焊全过程的三维动态模拟和仿真。
Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.
仿真系统模拟数担数控机床硬件插补原理,在计算机上动态地模拟出刀具运动轨迹,实现非实际切削过程中的数控代码验证。
The motion orbit of cutting-tool is simulated dynamically on the computer screen, with test and verification of NC program achieved in the non-real cutting process.
利用此模型可以模拟蒸汽发生器的动态性能,或与其它核电站模型一起构建核电站系统模型以供仿真分析研究或开发核电站仿真机之用。
The model is useful to simulate the dynamic characteristics of SG, or to build engineering simulator and training simulator with other nuclear power models.
该仿真系统可以根据不同的参数设置,合成不同的整车模型,并进行仿真和校验,实现汽车动态模拟驾驶的可视化视景仿真,用来模拟汽车运动情况。
This simulation system can be used to verify models and integrate to a whole vehicle to simulate vehicle's running condition according to different settings.
仿真结果表明该模型在稳态工况下模拟结果及动态过渡过程曲线均与工厂操作数据吻合,仿真模型可靠。
The simulation results showed that the dynamic transferred curves were in correspondence with the process operation data, so that the simulation model was proven to be reliable.
从理论上分析了在强度解调系统中采用光脉冲编码及相关算法提高测量动态范围的可行性,并通过模拟仿真及实验方法进行了论证。
The method which can improve the system dynamic rang by using the coded pump pulse and correlation algorithm is analyzed theoretically, and feasibility is demonstrated by the simulation.
通过对模拟仿真台在不同运动速度时的二维转台动态跟踪实验结果分析表明模拟演示系统有较好的跟踪精度。
The dynamic tracking experimental curves of two-dimension rotating floor, which are acquisitioned in different movement velocities of simulation, imply the better tracking accuracy of the system.
动态尾流模型又基于平衡尾流模型,考虑桨叶每个截面处产生的涡流对风轮的动态影响过程,对风轮的气动计算进行动态模拟仿真。
Considering the process of dynamic influence of eddy flow at every section of blades, based on Equilibrium Wake model, dynamic Wake model simulates the dynamic aerodynamic calculations for the rotor.
此外,测试系统软件通过对机床加工轨迹的动态模拟、坐标反馈以及机床运动速度、加速度数据分析等功能加强了仿真测试系统的测试功能。
Besides, the nc testing system software dynamic simulate machining path, feedback coordinates, analyze speed and acceleration data. These functions strengthen the test function of nc testing system.
作者认为综合应用计算机生成的动态3维图形,高画质图象投影和多媒体技术,可获得比物理模拟更真实的仿真效果。
The synthetic utilization of 3 dimension graphs produced by computer, high quality projecting and multimedia video makes better results than known marine simul…
作者认为综合应用计算机生成的动态3维图形,高画质图象投影和多媒体技术,可获得比物理模拟更真实的仿真效果。
The synthetic utilization of 3 dimension graphs produced by computer, high quality projecting and multimedia video makes better results than known marine simul…
应用推荐