本部分向您介绍如何使用模拟来标识原有流程中的问题，并介绍如何使用模拟和动态分析方法将其与将来版本进行比较以显示改进之处。
This section shows how you can use simulation to identify problems with As-Is processes, and how to show improvement comparing them to the to-be version using simulation and dynamic analysis.
使用Modeler，业务分析人员和其他非技术用户可以创建业务模型以对流程做文档记录，然后对模型进行模拟以了解动态行为。
Using Modeler, business analysts and other non-technical users can create business models to document their processes, then simulate the models to understand the dynamic behavior.
对已发生过或可能出现的故障形式，进行了过渡过程动态故障模拟计算和特性分析，获得了动力系统全系统动态故障模式库。
The dynamic fault simulating computation and characteristic analysis of transition process is performed under fault conditions, so the dynamic fault pattern base for whole power system is acquired.
模拟分析给出了椭圆光斑在线性度、灵敏度和动态范围等方面对探测性能带来的影响。
It is found by simulation analysis that the elliptic spot affects detector performance in linearity, sensitivity and dynamic range of the detector.
有杆泵抽油是世界采油工程中一直占主导地位的机械采油方式，系统动态模拟是系统效率分析和优化设计的基础。
The rod pumping is the predominance mechanical recovery mode in world petroleum production, the system dynamical simulation is the base of system efficiency analysis and optimum design.
通过各种动态监测资料综合分析和密网络大规模精细数值模拟研究，搞清了剩余油分布状况。
Through a comprehensive analysis on various dynamic monitoring data and a large amount of fine numerical simulation study of dense grid, it makes clear the residual oil distribution.
本文以罗埃大信号理论为基础，对提高小型化行波管效率的动态速度渐变技术和二次谐波的抑制问题进行了模拟计算分析。
The dynamic velocity taper and induced second harmonic are analyzed which improve the miniature TWT efficiency using computer simulation based on Rowe large signal theory.
然后着重介绍了在该试验台上，进行模拟汽车加速和减速工况时，发动机的动态性能的测试结果，并对试验结果作了较为深入的分析。
The testing results with the emphasis upon the engine dynamic characteristics of simulative acceleration and deceleration on vehicle are introduced and the experimental results in detail are analysed.
本文对用继电器和电磁阀组成的高炮自动调平系统进行了动态分析，并在此基础上进行了模拟实验。
This paper analyses the dynamical properties of the auto-leveling system of anti-aircraft gun, which consists of relays and electromagnetic valves, and the simulative experiments have been made.
为进行快速有效的分析、验证，本文借助计算机模拟的方法，这主要涉及到详细的空调动态负荷计算和系统模拟计算以及大量的计算结果统计。
To facilitates the analysis, this paper adopts the computer simulation methods which consist of detailed dynamic cooling load calculations, system simulations and heavy Statistics.
针对冲压机械的特点，采用计算机仿真和物理模拟，为冲压类机械动态特性分析与研究提供了一种实用方法。
According to the features of the punch machine, we research on the dynamic properties and put forward a practical way by means of computer simulation and physical simulation.
本文在考虑可靠性随时间变化和资金时间价值基础上提出了动态模型，并进行了模拟与分析研究。
This paper, based on the consideration of the varying reliability with time and the time value of capital, presents a dynamic model and makes simulation analysis.
通过对这三种动态低功耗自适应部件建立功耗估算模型，并使用功耗模拟器对其进行性能分析和功耗模拟。
By setting up the consumption estimate models of them, we use the simulator to make performance analysis and consumption simulation.
对小麦品种的春化作用、光周期反应及其与发育进程的关系进行了量化分析和动态模拟。
Quantitative analyses and dynamic simulation were undertaken on vernalization, photoperiod response, and their relationships to development progress in wheat.
以GIS技术为基础进行复杂系统的动态模拟和预测分析研究是将GIS应用走向深入的结果。
The dynamic simulation and forecast analysis of complicated system based on GIS is the result of wide application of GIS.
作者通过对实际系统的分析和动态模拟试验的验证，对其由于换相及电枢反应引起的输出电压降低作了较为详尽的、定量的分析。
The author evaluated the output voltage drop owing to the commutative process and armature reaction in detail by means of the analysis of the existent system and the dynamic simulation experiments.
利用三维动态显性算法，可以精确地分析和模拟金属变形过程，有效地优化工艺设计。
With 3-dimension dynamic explicit solution procedure, the metal deformation process can be analyzed and simulated accurately and the process design optimized effectively.
四是用静态和动态分析方法针对对抗双方在一定的核能力、不同的对抗模式下的核威慑有效性进行了数值模拟分析。
Finally, using static and dynamic analysis methods it numerically simulates and analyzes the results of nuclear deterrence validity in different conflict scenarios.
通过建立直接连接区域供热系统非线性动态数学模型，模拟和分析供热系统特征及七种集中调节模式系统动态响应。
The characteristics and the dynamic responses of seven types of central regulation model were simulated and analyzed based on a developed non-linear dynamic model in a direct district heating system.
通过各种动态监测资料综合分析和密网络大规模精细数值模拟研究，搞清了剩余油分布状况。
Through a comprehensive analysis on various dynamic monitoring data and a large amount of fine numerical simulation study of dense grid, it makes clear the residual oil d...
利用SD 375动态分析仪和SAS3.0分析软件包测取气缸盖的动态特性和模拟实际受力时的受迫变形。
With the help of SD375 dynamic analysis system and SAS3.0 analysis programs, the dynamic properties and forced deformation of cylinder head are investigated.
分析了系统热容和管道长度对系统静动态性能的影响，为物理模拟不同热管理系统静动态特性提供了依据；
The effects of the ducts length and system thermal capacity on the system steady and transient characteristics were investigated in detail.
针对标准房间建立热水和电采暖系统动态模型，模拟和分析这两种系统动态响应。
Dynamic models of a hot water heating system and an electrical heating system were developed for a standard room and utilized to simulate and analyze the responses of the two types of heating systems.
根据摩擦学原理，采用动态磨损模拟试验和表面微观分析研究的方法和技术，对气门动态磨损特性进行了系统的试验研究。
The wear properties of valve are systemically investigated by using dynamic simulation testing and surface microscopic analysis techniques based on principle of tribology.
根据野外地质模拟调查和油藏动态、静态资料分析，建立了任丘中元古界潜山油藏构造模型。
According to the analysis of field geological investigation, reservoir behavior and static state, the reservoir structure model of buried hill was built in Renqiu.
出汗暖体躯干工效模拟的实验装置，可对服装面料在不同工况条件下的传热、传湿性能进行静态和动态的测试分析。
In order to show the regulative function of clothing fabric in human ergonomics system, we study and make a set of experimental equipment of sweating trunk.
将模拟计算结果与监测数据分析相结合，进行反馈分析和动态设计，可以有效地指导施工和保证安全。
Finally, combining FEM computation with monitoring analysis is the main process of dynamic design which guides construction and assures safety.
利用大型有限元分析软件ANSYS，对空心球与钢管焊接件的温度场和应力应变场进行了三维数值动态模拟。
The 3d finite element numerical dynamic simulation of welding between hollow ball and pipe was carried out based on ANSYS.
利用大型有限元分析软件ANSYS，对空心球与钢管焊接件的温度场和应力应变场进行了三维数值动态模拟。
The 3d finite element numerical dynamic simulation of welding between hollow ball and pipe was carried out based on ANSYS.
应用推荐