根据炼油厂催化裂化装置常见流程建立了FCCU的反应再生系统的SDG模型，并在FCCU动态仿真软件平台上进行了自解释报警仿真实验。
The reaction-regeneration system SDG model of normal process FCCU is built and the simulation experiments of self-explanation alarming has been carried out.
该软件具有齿轮测量动态仿真功能，其突出特点是能在被测齿轮信息不充分的情况下也完成测量齿轮的设计。
The software is featured with dynamic simulation function of gear measuring, and its most prominent characteristic is to design a master gear in case of inadequate parameters of measured gear.
本文采用多线程、有限状态机和动态链接库技术设计一种信令数据仿真测试仪的软件体系结构。
This paper puts forward a design of software System Framework of the signaling data simulation tester based on the technology of multithreading, finite state machine and dynamic link library.
利用能量耦合法和ANSYS分析软件，由宏模型的动态响应方程仿真静电微泵腔的端点特性量关系式。
Then based on the macromodel, which was generated through energy coupled method and ANSYS software, the dynamic response functions were formulated to simulate the electrostatic micropump behavior.
利用多体动力学仿真分析软件ADAMS，对断路器机构系统进行动态仿真建模与分析，获得其分闸过程的动态特性。
The model of ACB mechanisms for dynamic simulation was built with multi-body dynamics simulation program ADAMS, and the dynamic characteristics were obtained by simulation analysis.
在软件中只需输入关键的参数，即可生成螺纹的数控加工程序并进行加工动态仿真，以检验数控程序的正确性。
In this software, as long as the key parameters are inputted, the NC program will be created out immediately, and the dynamic emulation will be accomplished to check up the validity of the NC program.
利用UG软件对运煤车进行实体建模，在AD AMS软件中对运煤车进行动态仿真，对其起动转矩和几个关键部分的受力进行了分析。
This paper built the solid model of a coal car with UG software, made dynamic simulation by ADAMS, and measured the starting torque and the forces on several key parts of the coal car.
利用EASY5仿真软件对组合阀组成的电液比例位置闭环系统进行动态建模仿真分析，为实验提供了控制参数。
By the use of software EASY5, the electro-hydraulic proportional system of position close-loop is modeled and simulated, which provided the controlling parameters for experiment.
在此四元组模型的基础上，应用面向对象设计的思想，结合跳跃表、动态空间管理、编译预处理等技术方法，构造出一个单片机软件仿真器类群。
With the theory of object-oriented design, jump table, dynamic memory management and code pre-processing, the class group of software simulators for single-chip microcomputers are designed.
公司在陈教授的带领下完成了动态化工仿真模型库，并开发形成了自有知识产权的计算机仿真培训软件。
The company completed the dynamic chemical simulation model base on Prof. Chen's leadership, and developed the computer simulation training software has its own intellectual property rights.
为了研究影响四足机器人动态稳定步行的因素，使用ADAMS虚拟样机软件对四足步行机器人动态步行进行运动仿真。
To study influence factors of quadruped dynamic walking robot on walking stability, ADAMS virtual prototype software is used to simulate dynamic walking of quadruped.
此外，利用有限元ansys软件对PC B组件在整个红外再流焊炉中的焊接过程建立了实体模型，进行了PC B组件再流焊全过程的三维动态模拟和仿真。
Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.
在进行挖沟器的系统动力学分析过程中，利用了虚拟样机技术adams软件对挖沟器链传动过程中的受力情况进行了动态仿真。
During the dynamic analysis of mechanical system, the force that act on the chain of trenching implement is simulated by virtual prototype soft ADAMS.
应用LOWTRA7软件包进行了目标和背景的动态图像仿真计算，可以为制导和火力控制提供仿真的红外动态图像。
The software package of LOWTRA7 was used to simulate and generate the dynamic infrared images of targets and the background, which supplied a data base for the guidance and fire control.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
利用MATLAB软件中的动态仿真工具SIMULINK建立了异步电动机起动过程的仿真模型，仿真结果验证了判据的正确性。
In this paper SIMULINK, a dynamic simulation tool in MATLAB software, is used to establish the simulation model of the asynchronous motor starting process, and simulation results...
对软件加密解密基本技术和方法分析的基础上 ，提出组合加密防拷贝 ，动态密钥读取防仿真两种方法。
This paper discussed the basic technique of setting security key and produced group security key to anti-copy and dynamic reading security key to anti digital simulation.
最后依据所开发的软件系统，对3-RPS并联机构在其工作空间内的动态特性进行了仿真分析，得出了一些对混联数控机床的设计和应用有益的结论。
Trough simulating the characteristics of the 3-RPS parallel mechanism, some conclusion can be obtained which is helpful to design the serial-parallel machine tool.
首先介绍了该弹性体结构的测力原理，并用有限元分析软件对弹性体的静态和动态特性进行了仿真。
The working principle of the sensor structure is introduced firstly, and the static and dynamic characteristic of the elastic body is obtained by finite element analysis.
此外，测试系统软件通过对机床加工轨迹的动态模拟、坐标反馈以及机床运动速度、加速度数据分析等功能加强了仿真测试系统的测试功能。
Besides, the nc testing system software dynamic simulate machining path, feedback coordinates, analyze speed and acceleration data. These functions strengthen the test function of nc testing system.
此外，测试系统软件通过对机床加工轨迹的动态模拟、坐标反馈以及机床运动速度、加速度数据分析等功能加强了仿真测试系统的测试功能。
Besides, the nc testing system software dynamic simulate machining path, feedback coordinates, analyze speed and acceleration data. These functions strengthen the test function of nc testing system.
应用推荐