原油集输太阳能加热计算机控制节能系统，为油田的采油、集输开辟了节能新途径。
The computer control energy-saving system of solar heating for oil gathering and transportation creates a new energy-saving way.
理论上，这样的系统能节约加热屋子和冷却机器的花销，使得计算机房在保持低温下，而办公室工作人员享受到电脑带来的温暖。
In theory, such a system would save on heating and cooling bills by exposing computers to low-temperature offices while exposing office workers to the warmth of the computers.
接口信号电源控制器与计算机的853数码允许控制器真正应用定制任何工业加热。
Interfacing the 853 digital signal power controller with a computer allows the controller to be truly customized for any industrial heating application.
本文论述了一个应用于加热炉计算机控制和优化操作的离散状态空间模型的开发。
The development of the discrete state space models for computer control and operation optimization of reheat furnaces is presented in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
借助计算机软件，在验证和修正的基础上，确定模拟装置的红外加热片的参数。
And parameters of heating sheet are determined on the basis of computation and verification employing computer software.
针对飞机除冰车快速加热系统的计算机温度控制仿真结果表明获得了令人满意的控制效果。
Computer temperature control simulation shows that this arithmetic has obtained satisfactory control effect in instant heating system for aircraft deicing vehicle.
最后给出感应加热器总功率的计算模型，此模型适合计算机对温度进行控制。
Provide the calculation model of general power finally, this model is suit for computer control.
介绍了带钢感应加热温度控制系统的组成，建立了系统的数学模型，并对该系统进行了计算机仿真。
This paper introduces briefly the composition of the temperature control system of strip steel in induction heating. Mathematical model of the system is established and computer simulation is made.
综合分析了近年来加热炉热过程计算机控制的应用情况、技术水平及发展趋势，供该技术的开发和研究者参考。
Based on analyzing synthetically the application and technical status of the computer control of thermal process in reheating furnace, the paper predicts its developing trend.
系统由具有循环冷却装置的加热炉、检测系统、温度控制系统、微型计算机和打印机五部分组成。
This system consists of five parts: heating furnace with circulation cooling device, detection system, temperature control system, microcomputer and printer.
加热炉内装有加热元件和测温元件，它们划分为一定数目的区域，各区温度由计算机进行单独控制。
Built with heating elements and furnace temperature measurement devices, they are divided into a certain number of regions, districts individually temperature controlled by a computer.
通过对感应加热过程中轴承内环内外表层温度的测试，间接证明了所建模型和计算机仿真的正确性。
The correctness of the models and simulation had been verified indirectly by testing the temperature inward-outward superficial coat of the bearing race snap.
开发了煤粉加热炉计算机控制策略，该策略不仅能最大程度地节能，而且保证了出钢温度的准确控制。
This paper presents a tactics of computer control of reheating furnace with coal powder. With this tactics, fuel savings are maximized and heating quality is improved.
本文介绍了用于浮法玻生产线的计算机控制加热系统。
SUMMARY In this text, has introduced compter control temperature system on float glass production line.
装配式感应器具有热效率高，维修容易的优点，利用计算机CAD设计可以优化设计感应器参数和达到快速加热的目的。
The assembling furnace has the advantages of high calorific efficiency and easy maintenance. Its parameters can be optimized by using CAD technique so as to achieve the goal of fast heating.
每次推钢后通过计算机多次模拟钢坯在加热段和均热段内的加热过程，采用遗传算法选出最优的加热炉炉温和推钢时间。
The heating process inside the furnaces of the billets can be simulated multiply times by computes and best control parameters of the furnaces can be determined.
针对铸件热处理用电加热炉，提出了一种简单易行的计算机控制方案，采用PID系统控制算法，以达到优化并稳定工艺参数及提高产品质量的目的。
For electrical heating furnace a simple and feasible computer control strategy with PID algorithm has been set forth to achieve dynamic optimization and production stability.
提出利用致死率曲线，对罐头食品不等温杀菌加热时间进行计算机精确计算的新方法。
This paper presents a new method of using lethality curve to calculate the time required in non-isotherm sterilization of canned food.
本文扼要地阐述了自行研制的电加热炉温度计算机解耦控制系统实验装置，包括硬件配置、实验软件平台以及解耦控制算法。
Based on the PC control of electric stove temperature decoupling system is given in this paper, include it's hardware, software and decoupling arithmetic.
利用热处理温度场的计算机模拟软件计算出大型锻钢支承辊锻件差温加热及冷却时的温度场。
The temperature field of a large forged back-up roll during differential heating and cooling was simulated with a computer based finite element method.
为此，介绍了燃气加热炉的计算机智能控制系统实现。
So introduced the computer control system of gas heating furnace.
文中介绍了一种用于计算机控制的发蓝带钢中频加热装置的温度监测实用系统以及相应的软件设计。
Introduces the design of a temperature inspecting practical system for a kind of autocontrolled middle frequency heating device for blue belt steel.
利用该系统可全面系统地模拟环形加热炉的实际生产过程，准确预测主要热工参数随加热时间的变化规律，为实现计算机优化控制奠定了理论基础。
This numerical simulation system can not only simulate the practical situation totally and systematically, but also predict the practical situation in annular furnace. The research lays…
利用该系统可全面系统地模拟环形加热炉的实际生产过程，准确预测主要热工参数随加热时间的变化规律，为实现计算机优化控制奠定了理论基础。
This numerical simulation system can not only simulate the practical situation totally and systematically, but also predict the practical situation in annular furnace. The research lays…
应用推荐