针对各类汽车同步器齿轮倒角在加工参数计算和信息集成上所存在的问题，提出齿轮倒角特征族的概念，并以此为理论基础构建集成加工支持系统。
A concept of gear chamfering feature family was proposed to solve the problem of processing parameter calculation and information integration for gear chamfering of vehicle synchronizers.
根据模型的拟合参数计算和讨论证明了应用力学模型可以检验非织造布加工中纤维网粘结程度的优劣。
According to the computation and discussion of the model parameters, a way of using the mechanical model to evaluate bonding degree of fibre web in nonwoven processing has been testified.
磨削模型的多参数和磨削过程的复杂性决定了计算机仿真技术应用于磨削加工的重要性。
Because of the multi-parameter of grinding models and the complicacy of grinding process, it is important for the computer simulation and prediction techniques to be applied to the field of grinding.
根据模型的拟合参数计算和讨论提出了应用力学模型可以检验非织造布加工中纤维网粘结程度优劣的可能性。
According to the computation and discussion of the model parameters, a possibility of using the mechanical model to evaluate bonding degree of fibre web in nonwoven processing has been proposed.
计算结果指出：在近地轨道选择合适的分子屏参数，可以在极高真空环境下加工超纯材料。
It is shown selecting suitable parameters of molecular shield on low-earth orbit, we can process super pure materials in extreme high vacuum.
介绍了木纤维sls加工的基本工作原理，提出了功率密度的计算公式，对木纤维s LS技术的参数确定进行了初步探讨。
This paper introduces the fundamental principle of wood fibre SLS sewing, the formula of power density, and how to determine the parameter of wood fibre SLS technology.
根据被加工的曲面特征，通过计算机模拟其加工过程，来寻求最优的刀轴运动轨迹和刀具几何特征参数。
The paper features an attempt to find the optimal axle moving locus of cutting tools and geometric parameter, based on the surface features and by means of a computer simulate machining process.
在检索相似实例中采用了分层检索策略和相应的相似度分层计算方法，并应用多目标的优化方法对加工参数进行优化。
In the case retrieval, a new layered searching strategy and similarity measurement method are given. A multi-goal optimization method is proposed to optimize the cutting parameters.
借助于人机对话方式，可以完成确定加工顺序、工序和工步，选择机床、刀具和切削用量，计算切削参数和加工时间等工作。
By means of interactive Planning, the system may determine the operation sequence, select machine tools and cutters employed, as well as the cutting parameters and cutting time and the like.
根据滚压加工油缸的工作原理，给出了油缸滚压加工参数的解析计算公式。
Based on the machining principle of rolling oil cylinders, the analysis formulas for machining parameters of rolling oil cylinders are presented.
通过表面轮廓仪测量加工试件表面形貌，采用自行研制的表面形貌参数表征系统进行表面形貌统计参数计算。
By the means of surface profile equipment, the machined surface was measured and the statistical parameter of surface topography was calculated.
借助计算机的海量可靠存储能力对NC加工程序、机床参数进行传送、备份。
We can convey and backup the NC's process procedure and the machine tool parameter with the reliable massive storage ability of computer.
本文阐述了电解加工原理，介绍了阴极结构及其各部位尺寸计算公式，推荐了有关工艺参数。
This paper presents the principles of electrolysis-machining and the design of the cathode, including formulas for main dimensions, and recommends the related operating data.
本文研究了加工经可控曲率修正的蜗轮齿面的滚刀设计问题，建立了相应的数学模型，并应用计算铲磨蜗轮滚刀刃形曲线的单参数包络法，求出铲磨砂轮截形曲线。
This paper studies the relief grinding problem of the hob of point contact worm gear drive and puts forward a one-parameter enveloping method to calculate the axial profile of relief grinding wheel.
介绍了一种大型齿圈齿形加工的新方法，并对其加工原理、主要参数的选择计算和切削试验结果进行了分析。
This paper introduces a new method cutting the profile of tooth of large gear ring, which has no upper limit diameter.
利用FANUC0数控系统具有RS 232c接口与计算机联网，实现数控机床与计算机间的通讯，进行数控系统参数、报警信息和加工过程状态信息提取。
Connect the RS232C of FANUC0's NC system and computer's interface, realize the communication among machine tool and computer. Pick up the information of parameter in the system and alarm information.
可测量多种机加工零件的表面粗糙度，根据选定的测量条件计算相应的参数，在液晶显示器上清晰地显示出来。
Measure a variety of machined parts of the surface roughness, calculated according to the selected measurement conditions corresponding parameters clearly on the LCD display.
可测量多种机加工零件的表面粗糙度，根据选定的测量条件计算相应的参数，在液晶显示器上清晰地显示出来。
Measure a variety of machined parts of the surface roughness, calculated according to the selected measurement conditions corresponding parameters clearly on the LCD display.
应用推荐