压缩机阻力矩的分析与计算；压缩机惯性力和惯性力矩的平衡。
It includes analyzing the motions and forces of the moving parts, calculating the loading moments and balancing the inertia forces and moments of the compressors.
对机械中常用的曲柄滑块机构的振动力和振动力矩的平衡问题进行了探讨。
A discussion has been made on the problems of balance for shocking force and moment of the commonly used crank slider mechanism in machinery.
对非正弦变化的负载阻力矩的平衡也可应用本设计的优化方法，有推广价值。
The optimization design method can also be used in the balance of non-sinusoidal changing load resistance moment and has important value of application popularized.
一个物体若要在某一点处处于转动平衡，在这一点处的总力矩必须为零。
For an object to be in rotational equilibrium about a certain point, the total torque about this point must be zero.
指出，由于发动机的各种故障引起个别气缸气体作用力减小，导致总的反倒力矩平衡性恶化，出现怠速抖动。
It is pointed that engines various faults can make the gas acting pressure lower in individual cylinders, lead to worsen the balance of gross overturn moment, and wobble the idling engine.
本文从水量平衡及水泵机组力矩方程出发，建立起水泵从起动到同步的微分方程序。
The differential equation of pump station start-up transient is established and derived from discharge balance and moment equation of pump unit.
既使采用单点牵引的方式，联轴式缆车在一定条件下也能自动平衡其载货偏心产生的偏心力矩。
Even if pulled by single wire rope, axle-linked cable-car can automatically and conditionally balance the eccentric moment caused by the carried loads.
本文对非均质的一般性地基，给出了满足力与力矩平衡及滑动面上屈服条件的地基承载力计算公式。
This paper gives the calculation formulas of foundation bearing capacity which can meet the balance of force and moment and the yield conditions on sliding plane for common heterogeneous foundation.
本文利用质量分布和附加两种惯性配重相结合的方法，完全平衡了八杆机构的摆动力和摆动力矩。
The article presents design equations and techniques for the complete shaking force and shaking moment balancing of eight-bar linkages due to both linear and rotary inertia, except external loads.
从物理分析的视角出发，以力矩平衡原理、弦振规律分别对二胡演奏中的运弓及左手指位进行了分析，定量地讨论分析了“乐感”中的力度和音准问题。
In the musical performance rule of ErHu, how to use bow and finger of left hand is analyzed, that is based on the moment balance principle and bowstring principle.
本研究所建立的冲线模式是依据多变数函数极值法与静力学力矩平衡原理设计而成。
The loom finish modeling in this research is designed according to the extreme of function and the statics moment balance theory.
最后部分讨论力矩再平衡回路中的耦合影响分析和去耦设计。
The last part present the analysis of coupling effect and decoupling design on the torque rebalance loop.
锥形锁风阀利用力矩平衡的方法实现卸灰。
Cone air lock valve can realize to discharge dust with the help of torque balance.
提出了在转矩模式、速度模式下力矩限幅和速度软化方式的负荷平衡方法。
The methods of load balance of moment limiting and speed softening mode under torque control model and velocity mode are put forward.
方法简单实用，可推广应用于其它机构惯性力平衡和惯性力矩平衡的优化计算中。
It is a easy, practical, and effective method, and can be extended to the calculation of inertia force and inertia moment balance.
采用MCS-51单片机为主控制器，用于步进式冷床同轴的直流调速系统，比较成功地解决了强力矩耦合情况下的双机转矩平衡问题。
MCS - 51 computer on slice is used as the main CPU in the step DC governor system for cold bed solving problems of two unit torque equilibrium under heavy moment coupling.
力矩器是力平衡加速度表的关键组件。
The moment device is a key part of a force-balance accelerometer.
对两个含有高级齿轮连杆基本杆组的齿轮连杆机构采用质量流和派生转动惯量流的思想进行惯性力和惯性力矩完全平衡。
Completely balance the shaking force and shaking moment of two geared linkages with high-ranking geared linkages groups by the method of mass flow and derivative moment of inertia flow.
借助于平衡力矩曲线能够直观地看出不同传动方案的增力效果。
According to counterpoise torque curve, effect of magnifying force of several transmission schemes can be obviously viewed.
其基本思路是通过质量动替代的途径，将空间闭链机构摆动力和摆动力矩的完全平衡转化为空间树状链摆动力和摆动力矩的完全平衡。
Using the mass dynamic substitution concept, the complete balancing of shaking force and shaking moment of closed loop spatial linkages may be reduced to that of open loop spatial kinematic chains.
为了减小由于摆动力和摆动力矩产生的振动和噪声的影响，对机构进行平衡分析。
In order to reduce the influences of vibration and noise caused by shaking force and shaking moment, the balance of the mechanism is analyzed.
重锤锁气翻板卸灰阀主要由阀体、阀板、阀轴、摇杆、重锤等零件组成，利用力矩平衡的方法实现锁气卸灰。
The valve is mainly made up of body, disc, axle, rocker and heavy hammer etc. It realizes discharging and air locking using trimming moment.
本文提出一种能完全平衡平面连杆机构摆动力矩的简便方法。
This paper presents a new, simple method for the complete shaking moment balancing of planar n-bar linkages caused by inertia but excluding external loads.
采用这一模型设计，可以获得球面配流副的最佳结构参数，实现力和力矩平衡，并可大大缩短设计周期。
Applying this model to practical design, the optimal structure parameters of the pair can be acquired with the good balancing of forces and moments and the design cycle can be decreased greatly.
在考虑力矩平衡的二维剩余推力法的基础上，提出了一种三维极限平衡分析方法。
Based on the two-dimensional residual thrust method considering moment equilibrium, a new three-dimensional limit equilibrium method was proposed.
振动力完全平衡后机构的振动力矩，可通过调整附加机构中偏心齿轮的回转中心得到部分平衡。
The shocking moment after the complete balance of shocking force can get partial balance through the adjustment of eccentric gear in the attached mechanism.
指出，由于发动机的各种故障引起个别气缸气体作用力减小，导致总的反倒力矩平衡性恶化，出现怠速抖动。
It is pointed that engine's various faults can make the gas acting pressure lower in individual cylinders, lead to worsen the balance of gross overturn moment, and wobble the idling engine.
其次，分析了光开关微反射镜的反射特性，然后推导了归一化的光开关静电驱动结构力矩平衡特性方程。
Secondly, the reflective characteristic of micro mirror is analyzed. And then a normalized equation that governs the static characteristics of the electrostatic driving structure is derived.
采用8系数轴承力学模型，考虑到陀螺力矩的影响，对刚性转子进行了动平衡理论分析。
The theoretical analysis of the balancing of the rigid rotor is performed by means of 8-coefficient bearing model and on the basis of taking into consideration the influence of the gyroscopic moment.
采用8系数轴承力学模型，考虑到陀螺力矩的影响，对刚性转子进行了动平衡理论分析。
The theoretical analysis of the balancing of the rigid rotor is performed by means of 8-coefficient bearing model and on the basis of taking into consideration the influence of the gyroscopic moment.
应用推荐