同时进行了冷藏鸡蛋的抗压力学性能试验研究。
Meanwhile the study on the compressive mechanical characteristic of the refrigerated egg was conducted.
对488发动机气缸盖使用的MS6876铝合金进行了系列温度下的力学性能试验研究。
The experimental investigation of mechanical properties for MS6876 aluminium alloy used for making 488 engine cylinder heads under a series of temperatures is Carried out.
采用理论与试验相结合的方法研究了这类材料的力学性能与主要失效方式。
The mechanical properties and failure patterns of the clad material are investigated with the method of experiment and theory.
通过充填聚氨酯泡沫的薄壁金属圆筒的力学性能试验，研究薄壁金属圆筒内充填聚氨酯泡沫的作用和效果。
Based on the mechanical property test on the thin wall metal cylinder filled with polyurethane foam, the effects of polyurethane foam filling in the wall metal cylinder are studied.
通过试验研究，得出利用聚丙烯纤维和硅粉对再生混凝土进行强化，可以明显改善其力学性能，提高其强度；
The intensified test research shows that the utilization of polypropylene fiber and silica fume can obviously improve the recycled concrete's mechanics performance and increase its strength.
对外墙外保温体系用聚合物抹面砂浆在耐候性试验环境下的力学性能进行研究。
It was studied the mechanical properties of polymer finishing mortar for external thermal insulation composite systems (ETICS) under weathering test.
本文阐述了在试验的基础上用较低的水泥用量配制高性能混凝土的方法，并对其力学性能和耐久性进行了研究。
On the basis of experiment, the paper shows us the research of the mixture, mechanics and durability of HPC.
为了研究部分再生骨料混凝土梁的力学性能，完成了5种配筋率共15根部分再生骨料混凝土梁的试验。
In order to investigate mechanical properties of partial recycled concrete beams, 15 partial recycled concrete beams with 5 kinds of reinforcement ratios were studied by experiment.
文中对再生混凝土的施工性能、力学性能进行了试验研究。
The construction and mechanical characteristics of secondary concrete are tested and studied.
对不同受热温度下水玻璃旧砂粒上残留粘结剂膜的物理形貌及力学性能进行了较系统的试验研究。
The physical pattern and mechanical property of residual binder film on the used sodium silicate sand under different temperature were studied by the numbers.
用正交试验的方法研究了不同工艺参数对高碳钢力学性能的影响。
The effects of different technological parameters on mechanical properties of high carbon steel wire have been investigated by crossed test method.
在准静态及中低加载速率下，开展了饱和与干燥混凝土力学性能变化的试验研究。
The compressive properties of saturated and dry concretes including strength, elastic modulus and peak strain under different loading rates are studied by experiments.
通过对比试验研究了石屑混凝土的力学性能。
Compared with ordinary concrete, the mechanical properties of stone-chip concrete were studied.
试验研究预应力钢绞线在经历高温作用并冷却至室温后的力学性能。
The material properties of prestressed steel strand post high temperatures are studied by experiments and various cooling patterns are considered in the experiments.
研究了不同回火温度对XCQ16钢微观组织和力学性能的影响，试验结果表明：xcq 16钢具有较宽的回火温度范围。
Effect of tempering process on the microstructure and mechanical properties of XCQ16 steel was investigated. The results show that XCQ16 steel present a wider tempering temperature range.
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
通过18根短柱试件的加载试验，研究了CFRP（碳纤维复合材料）加固对素混凝土短柱力学性能的影响。
The effects of CFRP( carbon fiber reinforced polymer) strengthening on the mechanical performance of short plain - concrete columns were researched by loading tests of 18 short - column specimens.
为了解预应力钢绞线张拉顺序对新老混凝土组合梁力学性能的影响，进行了双T形截面新老混凝土组合梁试验研究。
The old and new concrete of composite beam with double T-section was tested to investigate the effect of tension sequence of prestressing tendon on mechanical behavior of composite beam.
通过单向拉伸试验研究了AZ31镁合金轧制板在不同温度和应变速率下的力学性能。
The mechanical property of AZ31 magnesium alloy rolling sheet under different temperatures and strain rates was studied through uniaxial tensile test.
通过常温湿度试验，研究了HTPB复合推进剂力学性能随试验时间的变化规律。
The change rule of mechanical property of HTPB composite propellant with test time was studied by humidity test.
通过渗氢试样的常温力学性能试验和双悬臂梁试样在高温高压高纯水中的腐蚀试验来研究t 225ng钛合金的氢脆行为。
Through the tests of mechanical properties of charging hydrogen and the corrosion tests in loop water of high temperature and high pressure, hydrogen brittleness of T225NG Ti-alloy was studied.
试验研究了浇注后型腔压力对消失模铸造的铝件表面状态、力学性能影响的趋势。
Influence of pressure applied on the mold after pouring on the surface status and mechanical properties of aluminum castings in lost foam casting is investigated.
通过试验研究了横纹槽换热管的力学性能，验证了这种结构的可靠性并获得了几点重要结论。
The mechanical performance of the transverse fluted heat exchange tubes was studied through tests, the reliability of the structure was verified, and some important conclusions were derived.
本文用不同界面性质填料的推进剂，经单轴拉伸试验，研究偶联剂对不同填料提高推进剂力学性能的偶联效应。
By the uniaxial tensile test, the effect of coupling agents on mechanical properties of the composite propellant with fillers different in surface property is studied in this paper.
阐述了一些典型的试验分析与研究成果，包括橡胶隔震支座力学性能试验与隔震房屋振动台模型试验的成果；
Some typical testing analysis and researches, including the mechanical tests for rubber bearings and the shaking table tests for structural models with isolation system were provided herein.
通过试验研究其主要力学性能，并对试验结果加以分析。
Its dynamic performance has been tested through the experiments and analysed the related results.
通过对水泥稳定碎石基层掺加减缩剂的试验研究，分析了减缩剂对水泥稳定碎石材料收缩性能及力学性能的影响。
Effects of shrinkage-reducing agent on the shrinkage and mechanical properties of cement-stabilized crushed rock base are analyzed through an experimental study by adding the agent to the base.
本文论述分析了波齿复合垫片的常温力学性能和密封性能试验研究。
The test results of mechanical and sealing performance at room temperature of flexible graphite gaskets reinforced by corrugated metal sheet are discussed and analyzed.
本文通过试验研究了改性废灰砖砌体基本力学性能及其施工工艺，为改性废灰砖在工程中应用和推广提供了依据。
In the paper, mechanics and construction techniques of modified waste ash brick masonry are studied by the experiment which is the basis for the applications of modified waste ash brick in project.
本文对泡沫铝芯体夹层板材的准静态和动态力学性能进行了试验研究。
The quasi-static and dynamic compression mechanical properties of sandwich panel with aluminum foam core have been studied in this paper.
应用推荐