利用该模型对上海市的人均资本存量进行了分析。
It analyzes the per-labour capital stock of Shanghai by using this model.
利用该模型，设计了一种多元火灾信号探测系统。
According to this model, a fire signal detection system is designed.
利用该模型对大庆油田实测值进行了训练与测试。
The model has been trained and tested by the actual measured values in Daqing oilfield.
利用该模型对乘员安全约束系统的优化问题进行了研究。
A research on optimization of occupant restraint system has been done.
利用该模型能为城市供燃气系统的规划及管理工作提供决策参考。
The model can be used to provide decision references for the planning and management of town gas system.
最后，利用该模型对一个交通灯系统的智能管理例子进行了讨论。
It also presents the discussion of an example of the traffic control signals.
利用该模型编制的软件的计算结果与某基地的试验数据吻合得较好。
A program generated from this model has yielded results agreeing better with test data collected from some proving ground tests.
利用该模型计算了地下水可开采量及地下水流场和地面沉降的预报。
It can be used to forecast the groundwater flow, land subsidence and the workable reserves.
利用该模型分析了在软土地区深基坑开挖引起地下水渗流场的变化。
During the excavation of deep foundation pit, the seepage of groundwater forms a drawdown cone around the foundation pit.
利用该模型，可对铣削过程的特征参数如稳定性、切削力等进行预测。
The stability and cutting forces in high speed milling process can be forecasted with the model.
利用该模型，可以得到不同立地条件，不同年龄阶段的理论最优密度。
According to this model, we can obtain the theoretically optimal density for various sites and age periods.
测试结果表明：利用该模型所得到的预测膜厚与旋涂的实测膜厚基本相符。
Test results show that the prediction values gained by using this model are consistent with the measured ones.
利用该模型计算的送股率，对试点公司的送股方案进行合理、定量地预期。
The calculated stock-paid rate can be used to get a rational and quantitative anticipation for the reformation scheme.
利用该模型可以获得流动结构的演变规律，可有效进行工业反应器的设计。
Therefore, this model can be used to estimate the evolvement of the flow structure, which is fundamental to design of industrial reactors.
最后利用该模型对军械物资的消耗量进行了预测，结果表明预测精度较高。
At last, a practical example about the ordnance material consumption forecasting illustrates the high accuracy of the proposed model.
利用该模型对厦门高集海堤开口桥的两种设计方案的通航风险进行了评价。
In the paper, the risk assessment for the navigation plan of Xiamen Seawall Bridge was carried out.
利用该模型研究了不同改质条件下进、出改质煤气成分、温度的相互关系。
The composition and temperature of inlet and outlet gas at different reforming conditions were investigated by the model.
利用该模型，根据少量试验数据可预示长期冷热循环下的永久变形或工作寿命。
Using this model the permanent distortion and work life in long term under thermal cycling can be predicted based on a few test data.
利用该模型分析钢管混凝土超高墩的非线性承载能力可靠度指标与敏感性系数。
The reliability index and sensitivity coefficients of CFT high piers were invested by the proposed model.
利用该模型计算得到的本构曲线与实验数据的直接计算结果具有较好的一致性。
There is a good coherence between stress-strain curves calculated from the proposed model and that from experimental data directly.
并利用该模型，通过实例计算，得到了影响露天矿边坡稳定性各因素的主次关系。
The priority of each factor for the stability of open mining slope is obtained through examples on the basis of this model.
为了更为有效地利用该模型小鼠，我们通过原代培养建立了该模型的肿瘤细胞系。
We also established the cell line of this transgenic mice model through primary cell culture to make use this model more efficiently.
利用该模型可以计算它们的振动特性参数，研究其局部损伤与振动特性参数的关系。
The parameters of vibration characteristic are able to be calculated for the healthy and damage RCB with the model.
利用该模型在实现的电子商务应用平台已经在实际应用中验证了这种模型的实用性。
The electronic business application platform that is realized by utilizing this model has verified the practicability of this kind of model in practical application.
利用该模型可获得不同生产条件下各工序能耗的计算最小值和长流程的吨钢可比能耗。
The minimum energy consumption values and the energy consumption values of per ton steel can be given under the different conditions.
实验证明，利用该模型可以有效地完成对模具形状修正，实现了复杂冲压件的回弹补偿。
The experiments show that the system can completion the amendment of the mold of the shape effectively and realized the springback compensation to the complex stamping.
利用该模型对皮带机控制系统的设计进行了探讨，并得到符合控制要求的逻辑规则表达式。
Using this model the scheme of the control system of belt conveyors is discussed and the logic rule expression that meets control requirements is gained.
最后我们利用该模型分析了中国股票市场上不同监管措施的效应，并给出了相应的政策建议。
Finally, we analyze the effect of many regulations of Chinese stock market through this model, and then give out some Suggestions.
最后根据某市的广义成本参数估计值，利用该模型对发车频率进行了模拟，表明此模型可行。
Finally, this paper use some parameters of generalised cost, which coming from a city, to simulate this model, and the result shows it is feasible.
基于牛顿·欧拉方法建立了雕刻机器人的动力学模型，并利用该模型进行了动力学实验分析。
The rigid body dynamics model of engraving robot is established based on Newton-Euler method, and dynamics experiment is also analysed with this model.
应用推荐