仿真结果表明，该方法提高了网络对呼叫的实时处理能力，又增加了网络资源的利用率。
The simulation results show that this method can raise the call processing capability in real time and raise the utilization of the network resources in the meanwhile.
仿真结果表明该方法可以充分利用称重系统的动态信息求得称重数据的稳态值。
The simulation results show that the method proposed by the paper can use the full dynamic information of weighing sys- tem to obtain the steady values of weighing data.
仿真结果表明，在没有被控对象先验知识的情况下，利用该方法能准确地建立连续非线性系统的逆模型。
Simulation results show that the presented method can accurately construct the inverse dynamic model of the continuous nonlinear system even without prior knowledge about the controlled plant.
该论文提出了一种引入遗忘因子，利用参数取旧值时的仿真中所获得的信息进行优化的方法，使寻优速度有显著提高。
This paper suggests a new method which applies oblivion factor and USES the information that is taken from simulation of old parameter, and thus can enhance the speed of optimization evidently.
电力变压器故障诊断的仿真实验结果表明，利用该分类方法可以提高数据分类的精确性。
The result of simulative experiment for power transformers fault diagnosis shows that the method can overcome the before-mentioned shortcomings and improve the accuracy of data classification.
利用包含原理，提出一种分散L QG控制的设计方法，并给出利用该方法对距离偏差控制进行设计的仿真结果。
A decentralized LQG control scheme is proposed by using inclusion principle. The simulation results are given by this method for this distance bias control design.
该框架改变了传统的设计模式，利用先进的设计方法学和仿真支撑技术为产品开发提供了最大柔性和敏捷性。
The framework transforms traditional design mode, provides maximum flexibility and agility for product development by advantaged design methodology and simulated support technology.
仿真结果表明，该方法改善了网络对拥塞的实时处理能力，又增加了网络资源的利用率。
The simulation results show that this method can improve the congestion processing capability in real time and raise the utilization of the network resources in the meanwhile.
在考虑了汽车固有振动频率及行驶速度后，利用该方法对A、E两个等级的公路路面进行数值仿真。
Considering the effect of the vehicle natural vibration frequency and velocity, the simulation and analysis are done on a, E-the two grades of road using this method.
提出了基于仿真的修边线确定方法，该方法利用毛坯反求理论，通过多次有限元计算，获得比较理想的修边线位置和尺寸。
By iterative simulation calculating, relatively good trimming line can be obtained and an actual flanging experiment is carried out in order to verify the correctness of the method.
结合推广的卡尔曼滤波算法，建立了该方法的仿真模型，以某地球同步卫星为背景，利用模拟数据进行了系统仿真。
A simulation model of the method is set up using filtering algorithm of extend Kalman, and the system simulation is made using simulative data at the basic of a synchronization satellite of the earth.
本文给出了一种利用PID加输出反馈来任意配置闭环系统极点和零点的简单实用的电液伺服系统设计方法，仿真设计实例表明了该方法的有效性。
This paper gives out a simple and practical method of designing electrohydraulic servo system by using PID plus output feedback to make arbitrary configuration of pole-zero in closed-loop system.
在悬臂上进行最优控制的数值仿真结果显示该最优控制方法能充分利用控制作动器迅速抑制结构振动。
The optimal control law was simulated for a cantilever beam with the results showing that with the cable actuator, the structural vibrations were rapidly attenuated.
利用波数积分方法仿真计算了该模型在自由场条件下的近程声场，并分析了近场辐射噪声的基本规律。
The sound pressure at near distance under free field was computed by using the wave number integration and the basic characteristics of the radiated noise were analyzes.
并利用该方法，结合数据库建模技术分析和建立了ZXJ10程控机训练仿真系统的数据模型。
Using the method discussed above, the author analyses and gives the data model and the arithmetic model of the ZXJ10 Exchanger training simulation system integrated database-modeling technology.
利用该方法还能对非常复杂的电路、电力电子变流系统、电力拖动自动控制系统进行建模仿真。
This approach can also be used to model and simulate some very complicated circuits, power electronics conversion circuits, electric driven automatic control systems etc.
该评价方法包括自行模式和互动模式两种评价方式，自行模式仿真评价方法的基础是利用驾驶员模糊车速控制模型获得的运行车速；
This evaluation method includes auto mode and interaction mode. The base of auto mode is the operating speed obtained by driver's fuzzy control model;
该论文提出了一种引入遗忘因子，利用参数取旧值时的仿真中所获得的信息进行优化的方法，使寻优速度有显著提高。
This paper suggests a new method which applies oblivion factor and uses the information that is taken from simulation of old parameter, and thus can enhance the speed of optimization …
用提出的动态带宽分配算法，在NS2环境下进行了仿真。 仿真结果表明：该分配方法提高了网络资源利用率，降低丢包率。
The algorithm is simulated in NS2, and the results demonstrate that the method can improve the utilization ratio of network resources, and fall the drop rate of packets.
基于典型系统的仿真结果表明，该方法能充分利用系统中的电压支撑能力，提高系统电压稳定性。
Simulative results for typical systems demonstrate that the proposed strategy makes full use of voltage control capability in power system to improve system voltage stability.
并按照该理论与方法，从计算机实现的角度提出了可行的步骤与方案。利用此方案建立的凸轮实体精度高，并可进行有限元分析和加工仿真。
And on the base of the theory, in the view of the computer realization, the reliable steps and method are provided, its merits and disadvantages are summarized.
该方法利用傅立叶展开来逼近未知的积分项，导出一种类似于阿达姆斯方法的计算机仿真计算公式。
The method approaches the unknown integrating factor with Fourier Expansion and deducts a kind of computer simulation formula which is similar to the Adams arithmetic.
利用本文提出的控制模型设计了一个实例的信号控制方案，并通过V ISS IM仿真评价了该信号控制方案，验证了本文提出的控制方法的有效性。
A signal control plan is designed for an illustration according to the model and is evaluated by VISSIM. The feasibility and the validity of ther...
利用本文提出的控制模型设计了一个实例的信号控制方案，并通过V ISS IM仿真评价了该信号控制方案，验证了本文提出的控制方法的有效性。
A signal control plan is designed for an illustration according to the model and is evaluated by VISSIM. The feasibility and the validity of ther...
应用推荐