那名只透露其名叫“丹”海军前不久刚接受了新闻频道CNN的采访，他透露，威尔法特曾告诉他他之所以从军就是为了不让那些有家室的人饱受离别之苦。
That Marine, interviewed earlier this week by the news channel CNN and identified only as "Dan", said Wilfahrt had told him he wanted to be a soldier to protect someone with a family.
经济法视野下国家与市场关系的重构――以共和主义为视角…………… 李永成刘德刚。
Reconstruction of the Relationship Between Government and Market through Economic Law in View of Republicanism………………………………………………LI Yongcheng LIU Degang.
本文根据铅的刚塑性本构关系，利用均匀塑性变形能法，推导了铅挤压阻尼器的阻尼力滞回模型。
Based on the rigid plastic constitutive equation of lead, the damping force model of lead extrusion damper was deduced from the even plastic deformation energy method.
本文提出用子结构法解决具有刚接与铰接混合连接的局部双层网壳结构的几何非线性分析。
The geometrically nonlinear analysis of the Partial Double Layer (PDL) reticulated shell with rigid, pinned or rigid pinned joints was studied in this paper.
详细阐述了刚塑性有限元法的原理，以及罚函数法数学模型的推导及应用技术。
It also introduced the basic principle and mathematical pattern as well as application technique of Rigid Plastic Element Method.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
研究了绝对坐标法在大变形柔性梁系统刚-柔耦合动力学问题中的应用。
The application of an absolute nodal coordinate (ANC) formulation in the coupling dynamics of flexible beams with large deformation was investigated.
为验证新模型，完成了棒材轧制试验，并且利用刚塑性有限元法对轧制过程进行了模拟。
The validity of the new model has been examined by the bar rolling experiment and the rigid-plastic FEM simulation.
本文采用三维刚粘塑性软件TFORM3对12V240曲轴RR法限制成形工艺及模具结构进行了设计分析。
The RR process of the 12V240 crankshaft and die structure are designed and studied using the TFORM3 software of 3D rigid plastic FEM.
用摄动法分析刚球在非线性滑动摩擦力作用下的运动规律。
The perturbation method is used to analyse the motion of the rigid sphere under the action of the nonlinear sliding friction.
它耦合了三维刚塑性有限元法，弹性有限元法和计算辊系变形的影响函数方法。
Three-dimensional rigid-plastic finite elements, elastic finite elements and influential function method for the analysis of deformation of rolls system are combined.
采用三维刚塑性有限元法对四种径向精锻变形道次的变形分布进行了数值模拟计算；
The strain distributions of four kinds of radial forging processes have been simulated by rigid-plastic FEM.
数值模拟分析了新f M法拔长时，不同的砧宽比、料宽比及压下率情况下，刚端长度对应力分布的影响。
The influence of stiff length affecting stress distribution under different AWR, BWR and CR when stretching by NEM FM were simulated and analyzed.
采用大变形刚塑性有限元法模拟超塑性材料轴对称锥形模约束胀形过程。
The constrained superplastic bulging process is investigated by a large rigid-plastic finite element method.
针对粉末多孔材料，采用体积可压缩刚粘塑性热力耦合有限元法对其等径角挤压过程进行模拟分析。
The densification and deformation behavior of porous materials during the ECAP process were investigated by (thermo -) mechanical coupling finite element method.
论述了刚（粘）塑性有限元法的主要思想和处理方法。基于前期的本构模型，得出了刚（粘）塑性有限元法的求解列式。并对有限元数值模拟的发展前景作了预测。
Based on a former constitutive model, the calculation formulas for rigid-(visco) plasticity FEM were worked out, and an overview on the development of FEM numerical simulation was made.
本文采用刚塑性有限元法分析圆环压缩，并与上限法分析和试验结果进行比较。
In this paper, the rigid plastic finite element method is applied to analyze ring compression and the results are compared with those of the upper-bound method and experiments.
预应力混凝土连续刚构桥常常采用经济合理、方便快捷的悬臂现浇施工法。
The prestressed concrete continuous rigid frame bridge often adopts the economical and reasonable segmental construction technique with cantilever installation.
所有动物都聚集在荣耀石，等候狮子王木法沙和王后沙拉碧出场，向大家介绍他们刚生下不久的儿子――辛巴。
All the animals gather at Pride Rock to see Mufasa, the Lion King Musical, and his queen, Sarabi, introduce their newborn son, Simba.
大跨径连续刚构桥梁施工，通常采用挂篮悬臂现浇对称施工法。
In the long-span continuous rigid frame bridge construction process, usually use hanging basket-situ cantilever construction method of symmetry.
在加权残值法计算的基础上，进行了两端刚固的闭合圆柱壳失稳的可靠性计算，表明了该方法的有效性。
By the method of weighted residuals the reliability of the unstability of the closed cylindrical shell with both ends built-in is calculated. Results show the validity of the present method.
应用韧性损伤力学模型以及刚塑性有限元法，分析了金属板材剪切断面变形的过程。
Ductile damage mechanics model and rigid finite element method was adopted to simulate the sheet metal shearing process.
有限元计算结果与实验结果的比较，证明了采用刚塑性有限元法研究螺旋伞齿轮闭塞挤压工艺是可行的，将在复杂零件的塑性成形工艺的研究中起到指导作用。
By comparison with experimental results, it would be proved that FE simulation is available and will provide guideline for deformation process of complex forging parts.
奥立刚说完这些话，特鲁法这几个月里一直害怕的事发生了？一阵风刮来从细枝上拉扯松了奥立。
And just as Ole spoke these words, that which Trufa had feared all these months happened-a wind came up and tore Ole loose from the twig.
本文介绍初参数的角变位移法在谐和振动作用下刚构动力计算中的应用。
The paper first introduces the pre-parameter method of angular deflection for use in the calculations of dynamic stresses in rigidly-framed structures under harmonic vibrations.
为了验证新模型，进行了棒材轧制试验并且利用三维刚塑性有限元法对轧制过程进行了模拟。
The validity of the new model was examined by the bar rolling experiment and the 3D rigid-plastic FEM simulation.
为了验证新模型，进行了棒材轧制试验并且利用三维刚塑性有限元法对轧制过程进行了模拟。
The validity of the new model was examined by the bar rolling experiment and the 3D rigid-plastic FEM simulation.
应用推荐