机械零件:轻量化机械件或减少CNC3d高切削量铝合金锻件。
Mechanical parts: light weight machinery parts or aluminum alloy forgery parts which re3duce CNC 3d high volume cutting.
研究了竹材切削不同刀具前角、切削量与切削速度对切削力的影响。
The effects of cutting parameters, the tool rake Angle, cutting thickness and speed, for bamboo on cutting forces are studied on this paper.
实验研究了磁场力、磁极形状对切削量的影响规律,结果与理论解析一致;
Stock removal rule is experimentally analyzed and affected by magnetic force and magnetic pole shape, and are good agreed with theoretical resolution.
研究了补偿球差和高阶散光的像差与角膜切削量的关系,即补偿球差和高阶散光的角膜切削模型。
A model for calculating ablation profile to precompensate for spherical aberration and the higher order astigmatism is presented.
从切削运动、切削量、磨粒性能三个方面分析了超声波振动珩磨的切削机理,并归纳了超声波振动珩磨的特点。
The cutting principles including cutting motion, cutting quantity, and grain performance of ultrasonic vibration honing are analyzed, and its specialities are generalized.
因卡爪硬度较高,又系断续切削,所以修正时切削深度和走刀量要小,切削速度也不宜太高。
The clamping claw with high hardness, and intermittent cutting, so that when the cutting depth and cutting amount is small, the cutting speed is not too high.
切削力、磨削力和磨削表面粗糙度是表征切削加工和磨削加工的最重要特征量,对它们进行预测分析和过程控制具有十分重要的意义。
Cutting force, grinding force and surface roughness of grinding are the most important parameters to scale machine progress, thus precision methods for them is needed in engineering.
切削用量三要素包括切削速度、进给量和(或叫吃刀量)。
Thee three factors of cutting include cutting speed, feed and the depth of cut.
第一种是基于电流信号的刀具磨损模型,第二种是直接基于刀具磨损量的模型,这两种模型均滤除了切削条件的影响。
One is the current signal model with bore cutting condition, and the another is the model of tool wear with cutting conditions and time.
硬质合金刀具在不锈钢加工中,其刀具耐用度主要是取决于后刀面边界磨损而不是主切削刃后刀面的平均磨损量。
In many cases of stainless steel cutting operations with carbide tools, a tool life strongly depends on flank notch wear of depth of cut rather than average flank wear of main cutting edge.
老式机床通常是由工人操作并由他们决定机床速度、进给量、切削深度等。
Early machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.
根据试验数据,对切削过程中产生的振动信号进行了分析与处理,提出了能过反映刀具破损的特征量。
According to experiment data, as for vibration signals sent out during cutting, is used to analysis and disposal, and characteristic value reflecting tool breakage is extracted.
通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验,探讨其切削性能。
Using diamond film coated tool, the dry-cutting tests are carried out on Si-Al alloy with different Si-contained. The cutting properties are studied.
文中通过用金刚石薄膜涂层刀具对含硅量不同的硅铝合金进行干切削试验,探讨其切削性能。
In this paper, the dry-cutting tests were carried out by diamond film coated tool on Si-Al alloy and this tool's cutting properties were studied.
高速切削试验表明:切削速度的提高和每齿进给量的减少有利于改善加工表面粗糙度。
The experiment showed that the high quality surface roughness was easy to obtain by increasing the cutting speed and decreasing the feed engagement.
研究了用自旋转车刀加工金属纤维时,切削深度和进给量对纤维力学性能的影响。
In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.
不锈钢微型细长轴由于含碳量低,韧性大,切削性能差等特点,使得常规设备的加工难以进行。
It is very hard to process the mini-slender shaft of the stainless steel using the ordinary machine tool because its lower carbon content, great toughness and bad cutting feature.
在切削加工中,为了提高已加工工件的表面质量,需要研究切削速度和进给量对已加工工件残余应力的影响规律。
The effects of cutting speed and feed on residual stress of workpiece machined should be studied to improve surface quality in machining.
研究分析了不同的切削速度及进给量对叶轮叶片加工的表面粗糙度的影响。
The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.
利用多传感器对切削力和振动信号进行监测,通过频率变换提取切削力特征量,采用小波包分解技术提取振动信号特征量。
Signals of cutting force and vibration are measured with multi-sensor and features in frequency domain and time-frequency domain are extracted by using wavelet package decomposition.
测绘了切削温度、后刀面磨损量与切削时间或切削速度的关系曲线,分析了刀具前、后刀面显微磨损、破损形貌和化学变化。
Cutting temperature, relation curves of wear with cutting time and cutting speed, microscopic features and chemical changes of rack face and rear face of the tin coated tool were measured.
研究了切削速度和进给量对加工表面粗糙度的影响。
The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.
刀具寿命相对消耗量是利用功率信号、泰勒公式、切削工艺参数库以及在线获取的实际切削时间来获取的。
The RCI of tool life is obtained by the power signal, the Taylor formula, the database of cutting parameters and cutting time.
在本试验参数范围内选取切削参数时,切削速度、进给量取中值有利,切削深度取小值有利。
At the range of the testing parameters it is of advantage to select middle value of feedrate and cutting speed, and smaller value of cutting depth.
通过切削试验,分析了切削速度、背吃刀量以及切削液等参数改变时,对切削力及表面质量的影响。
Through cutting experiment, the influence on cutting force and surface quality was analyzed when change the parameters such as cutting speed, back cutting depth and cutting fluid and so on.
有些加工,如精度要求不高或需要切除的金属量较小,也可能只需一次精切削。
Also, in some jobs, fot example, when great accuracy is not needed, or when a comparatively small amount of metal must be removed, a finishing cut may be all that is required.
有些加工,如精度要求不高或需要切除的金属量较小,也可能只需一次精切削。
Also, in some jobs, fot example, when great accuracy is not needed, or when a comparatively small amount of metal must be removed, a finishing cut may be all that is required.
应用推荐