然后，在当前位置应用此平均值，并且刀具轴以倾角分量0投影到曲面上。
This average is then applied at the current location and the tool axis is projected onto the surface making the tilt component 0.
为了在工件上加工光滑的轮廓，帕森提出了一种自动的机床控制方式，它能够引导铣床刀具加工出一种“过轴曲线”。
Parsons recommended a method of automatic machine control that would guide a milling cutter to produce a "thru-axis curve" in order to generate smooth profiles on work pieces.
因此，要提高超细长轴车削加工的精度，必须对车床的夹具和刀具做进一步的改进。
Therefore, for improving the accuracy of exceed slender axle on turning, must need to do with the lathe fixture and cutting tool for further improvement.
根据被加工的曲面特征，通过计算机模拟其加工过程，来寻求最优的刀轴运动轨迹和刀具几何特征参数。
The paper features an attempt to find the optimal axle moving locus of cutting tools and geometric parameter, based on the surface features and by means of a computer simulate machining process.
应用计算几何技术来决定优化的刀具定位和刀具姿态以实现环形刀的5轴自由曲面数控加工。
A method is presented by using computational geometry techniques to determine optimal tool position and orientation for 5-axis machining with torus end-mill.
研究了风栅铝片三轴铣削加工中装夹方法、刀具选择、走刀规划以及切削参数确定方法；
The clamping means, cutter selection, tool path planning and cutting parameters determination using three-axis machine for aluminum windshield pieces were studied.
介绍和扩大了数控加工中的刀位面和保护面的概念，研究和实现了一种基于曲面离散生成三轴加工无干涉刀具轨迹的算法。
An algorithm of 3-axis interference-free tool path is researched and realized by cutter location surface and protection surface of discrete triangular facets of machined surface.
介绍了五轴联动数控技术、叶片加工工艺方法和高效刀具系统的开发应用。
The nc machining technique of five axes simultaneous moving, it's application in machining blade and developing of the high efficiency tool system are introduced.
我们研制的MMK6026六轴五联动CNC工具磨床用于加工锥形球头立铣刀和其它复杂形状刀具的前刀面与后刀面。
Our product MMK6026 , which is CNC tool grinder with 6-axis and 5-coordinate controls, is used to machine the rake face and relief of conical ball end mills or other complex shaped tools.
基于该算法的空间刀具半径补偿G指令将可避免由于刀具磨损和刀具更换导致的三轴侧铣数控代码重生成。
The space tool radius offset G instructions with the developed approach will avoid NC codes regeneration due to tool wear or tool change during the three-axis NC flank milling process.
该机床通过PMAC将它的切削轴从动于主轴编码器，使得刀具速度跟踪主轴速度，从而得到恒定的螺距，实现了精确从动。
The machine tool may realize accurate driven move because its cutting axis follows encoder of spindle and tool velocity can follow velocity of spindle by PMAC.
建立了DMU-70V五轴数控高速加工中心主轴-夹具-刀具系统的有限元模型，并利用动态测试的方法对有限元计算结果进行验证；
The FEM(finite element method) of the main shaftclamping apparatus-cutter system for DMU-70V NC high speed machining was built, and the results of the FEM were validated using dynamic test.
从等距型面轴曲线轮廓特点出发，研究了等距型面的曲线方程，尝试对磨床进行改装，给磨床安装一附件进行合理的运动分配，使工件与刀具完成协调运动，加工出等距型面轴。
We try to refit grinding machine and install an attachment which can do reasonable distribution of the movement so that workpiece and cutting tool complete coordinated movements.
主要压切辊均采用万向轴传动，传动轻快，刀具寿命保证。
The main press-cut rollers adopt universal shaft driving with fast driving and life guarantee of cutting tool.
艉轴管镗孔加工专用刀具，包括刀柄、刀片及顶丝。
A screw shaft tube boring process professional cutter is provided, which comprises a shank, a blade and a jbckscrew.
水轮机叶片多轴联动数控加工仿真环境，通过对数控机床、刀具、夹具及等加工过程映射构建。
The simulation environment of Multi-axis simultaneous NC machining for blades of large hydro turbine is established through mapping of machining process for NC machine tool, cutter and clamp.
文章提出了一种空间刀具半径补偿后置处理方法，自主开发了五轴机床的后置处理软件。
An algorithm of post processing for space radius compensation is presented, independently developed a post processing software.
将叶片模型变换到加工位置，算出五轴联动刀具轨迹。
The model of blade was changed to machining position, and the track of cutter for five-axis simultaneous machining was calculated.
在非线性方程组牛顿迭代法的基础上，进行五轴数控加工刀具轨迹求解算法研究。
Based on nonlinear equations Newton method, work out the 5-Axis NC tool path.
求出控制轴与主轴部件铰接点中心坐标，以确定刀具加工姿态。
Center coordinate of hinge joining point between control shaft and host shaft parts is calculated to determine machining posture of cutter.
针对复杂多曲面3轴粗加工方法的刀轨自动生成问题，提出一种刀具轨迹的优化算法。
According with the tool path generation in the 3 axis rough milling of complex multi surfaces, the article presents an algorithm on the optimization of tool path.
提出了一种求解曲面到刀具极值距离的方法，以解决曲面5轴数控加工中刀具与曲面的干涉问题。
A novel method is proposed to calculate the minimum distance from tool to free-form surface, to solve tool interference problem in 5-axis nc sculptured surface machining.
其主要特点是：由被切型材横截面决定其切削刃形状的刀具被安装在转动轴上，随转动轴转动。
The utility model is characterized in that: the transverse sections of shaped sections to be severed determine that the edged cutting tools are fixed on the rotation axes and rotate along.
本设计的是通过采用三轴联动机械来完成角度定位，刀具线速度定位和切割路径运动控制。
What this design is to pass to adopt three stalks allied move a machine to complete an angle fixed position, the knife has line speed a fixed position and incises path sport control.
在此基础上提出了一个刀具势态优化的新方法，从而使五轴加工的效率得到进一步提高。
By using this algorithm, more material can be removed in one step of machining, and therefore, machining efficiency is improved.
针对复杂曲面的五轴加工，提出了一种刀具方向控制的方法，并给出了相应的算法。
This paper presented a methodology and algorithm of tool orientation control for 5-axis sculptured surface CNC machining.
A系列雕刻切割刀具，全部采用进口超微粒钨钢材料，经五轴联动数控磨床，专利特殊刃磨工艺精制而成，具有超强的耐磨性和抗断性。
Series A, made of imported ultra-fine particle tungsten carbide, processed by 5-axis CNC grinding machine and special sharpening, high abrasion resistance and anti-broken.
A系列雕刻切割刀具，全部采用进口超微粒钨钢材料，经五轴联动数控磨床，专利特殊刃磨工艺精制而成，具有超强的耐磨性和抗断性。
Series A, made of imported ultra-fine particle tungsten carbide, processed by 5-axis CNC grinding machine and special sharpening, high abrasion resistance and anti-broken.
应用推荐