凹板筛设于滚筒的外下侧并固定于机架上；
The horizontal fan is arranged on the frame at the lower side of the rolling tube.
另外，作者还对提高凹板的分离能力作了实验研究。
Further research has been made by the author to improve the separating capacity of the concave through experiments.
论文具体针对凹板印刷机的收放卷张力控制展开讨论。
The control of tension upon rolling-up in copper foil production;
板式盘管或螺旋管是由两片有对应凹槽的平板或凸、凹板对压成型的。
The plate type coiled pipe or spiral pipe is molded by two flat plates with corresponding grooves or a convex and a concave plates which are oppositely pressed.
利用本模型可以得到喂入轮的脱粒率对脱粒装置凹板的脱粒率及分离率的影响。
The influence of the threshing rate of the feed beater on the separating rate of the concave can be calculated by using this model.
本论文具体针对在凹板印刷机运转过程中的收卷放卷张力控制进行讨论与研究。
Main subjects discussed in this dissertation focus on the tension control in unwinding and winding processes for the gravure press machine.
将逐稿器的分离率计算公式应用于切流式谷物脱粒装置凹板的分离率计算时，将产生较大的误差。
If the separating rate equation of straw walker is direct applied to calculating the separating rate of tangential threshing unit, a considerable error would be met in the results.
本文提出了一种新的脱粒装置凹板分离率的数学模型，并将其与原模型及实验数据进行了分析比较。
This paper presents a new mathematical model for calculating the separating rate of the concave in grain threshing unit.
通过在轴流脱粒与分离装置试验台进行单因素试验，分析了凹板间隙对谷物联合收割机作业性能的影响。
The study was according to the single parameter on the axial threshing and separating unit test bed, and concave clearance had an effect on its work performance was analyzed.
在西方，这样大量的船队和海港生活只有在上个世纪有关圣佛郎西斯科，马赛，布里克瑟姆的凹板印刷照片上才能看见。
Here is a throng of vessels and a harbour life that in the West you see only in turn-of-the-last-century photogravures of San Francisco, Marseille or Brixham.
在对射流冷却平板模型和射流冷却凹板模型数值模拟的基础上，设计了射流冲击冷却式蒸汽冷却叶片，并对其进行了热耦合数值模拟。
The present study numerically investigated a conceptual type of internal steam cooling vane with the impingement cooling technology on the basis of plane model and concave model.
在对射流冷却平板模型和射流冷却凹板模型数值模拟的基础上，设计了射流冲击冷却式蒸汽冷却叶片，并对其进行了热耦合数值模拟。
The steam cooling method was applied in this paper to study the design and characteristics of cooling structure for a vane of gas turbine.
在上终椎椎体生长板凸、凹侧软骨细胞PCNA增殖指数有明显差异且有统计学意义（P<0.05）。
There was a significant difference of the proliferative potential index(proliferating cell nuclear antigen, PCNA index) between convex side and concave side at the upper end vertebra(P<0.05).
顶椎椎体生长板凸、凹侧组织学分级差异有统计学意义（<0.05）。
The histological grades were significantly different between the convex and the concave side of the growth plate in the apex vertebrae (P<0.05).
一凸形突起物（26）延伸自下板，并接合一关节表面，该关节表面由在上板中形成的一凹入凹处（28）所限定。
A convex-shaped projection (26) extends from the lower plate and engages an articular surface defined by a concave recess (28) formed in the upper plate.
一种厚纸糊成的可滑动调节的轻分隔物，安放在日本住宅地板和天花板的凹糟里，可移动到各种位置形成房间。
Light, sliding partitions of thick paper mounted in grooves on the floor and the ceiling of a Japanese house and moved into various positions to form rooms.
介绍了多工位数控冲床用百页窗模具的设计，重点介绍了下装凸模、上装镶拼凹模及卸料板的设计和计算方法。
This article introduces the design of louver tooling for turret punch press, mainly focusing on the design and calculation of die, punch body and stripper plate.
最普遍的是板框式过滤机，有可填充的、金属隔片的和凹显空间滤饼的。
The most common, the plate-and-frame press, contains caulked , metal septa and a recessed cake space.
排放板包括凹入的变形部分、形成在变形部分的中心的突起和围绕变 形部分形成的凹槽。
The vent plate includes a concave deforming portion, a protrusion formed in the center of the deforming portion, and a notch formed around the deforming portion.
厚实板类铸件按传统工艺生产，容易产生缩孔、缩凹、缩松、夹砂、胀包等铸造缺陷。
The shrinkage cavity, depression, shrinkage porosity, scab and swell defects often took place with the heavy plate castings produced by adopting traditional foundry method.
终椎凹侧生长板和顶椎凹侧生长板组织学分级有明显差异且有统计学意义（P<0.05）。
The histological difference was also found significant statistically between end vertebrae and apex vertebrae in the concave side of vertebral growth plates (P<0.05).
流化床为支撑板加气囊袋结构形式时，支撑板可为凹弧形。
When the fluidized bed is in the structural style of a supporting plate and an air bag, the supporting plate can be a concave arc.
具有发光二极管的一块印刷电路板和装在上面的一个二极管整流桥被容纳在一个凹座中。
A printed circuit board having light emitting diodes and a diode rectifier bridge mounted thereon is retained in a recess formed in the base portion of the light reflector.
我低着头从一拨又一拨吊唁的人群中穿过。他们轻声地交谈着，不时停下来看看每堵墙上的凹室：里面的小铜门一直排到了天花板上。
I keep my head down as I walk through groups of funeral-goers, talking quietly to each other and pausing to examine the compartments lining every wall: little brass doors up to the ceiling.
天花板以半透明玻璃和创造高度错觉的凹嵌区域为特色。
The ceiling features translucent glass and recessed areas that create an illusion of height.
通过比较，得出各种方法的优劣，为车身覆盖件抗凹分析提供依据，也为车门等闭合件外板抗凹分析提供参考。
By comparison, get both good and bad methods, which provide the basis for body panel dent analysis, also provide a reference for doors and other closer dent analysis.
将凹部底面的颜色设定成比板表面(18)颜色的相对亮度低。
The color of the bottom surfaces of the recesses is set to brightness relatively lower than the brightness of the color of a board surface (18).
将凹部底面的颜色设定成比板表面(18)颜色的相对亮度低。
The color of the bottom surfaces of the recesses is set to brightness relatively lower than the brightness of the color of a board surface (18).
应用推荐