锥形肋位于锥度支撑肋的圆周上，在凸轮凹槽之间，与凸轮滚子的圆周线性接触。
Taper support rib: rib conical taper at the circumferential rib support, in between the CAM groove, Roller CAM with the circumference of linear contact.
锥度支撑肋：锥形肋位于锥度支撑肋的圆周上，在凸轮凹槽之间，与凸轮滚子的圆周线性接触。
Taper support Rib : Rib conical taper at the circumferential rib support, in between the cam groove, Roller Cam with the circumference of linear contact.
本文介绍了一种新型的凸轮机构，其中的圆柱凸轮与相应滚子之间按照差动原理进行工作。
This Paper introduces anew mechanism of the differential CAM, in which the work between cylindrical CAM and relating roller is carried out by the differential principle.
通过分析不同从动件与凸轮的几何关系，推导出一组平底挺杆、滚子或球面挺杆、尖锥挺杆升程的相互转换通用公式。
Based on the geometrical relation between tappets and cams, uniform formulas for mutual lift-range transition between flat based tappet, roller (or sphere) tappet and cone tappet were presented.
该方程适用于滚子为柱型或锥型凸轮为槽定位或脊定位、单头或多头、左旋或右旋、上转或下转的情况。
The equations is used whether roller is column or cone, cam is in spine or groove location, left or right helical, single head or many heads and how it is turning.
借助柱面坐标，建立了圆锥滚子直动从动件圆锥槽凸轮的廓面方程和压力角公式。
With cylindrical coordination, this paper establishes the contour surface equations and pressure Angle formula of the conical grooved CAM with translating conical roller follower.
用球面坐标建立了圆柱滚子球面凸轮的轮廓曲面解析方程，为此种凸轮的设计计算和数控加工提供了理论依据。
This paper establishes a contour surface equation of the spherical surface cam with a cylindrical roller, Which provides theoretical basis for the design and NC processing of the cam.
还系统地分析了可控点啮合的实现及点啮合球锥滚子弧面分度凸轮机构的曲面方程。
Systematic analyses are made on the realization of engagement at the controllable point and on the curved surface equation of point engaged sphere-conical roller arc surfaced indexing cam mechanism.
按本文的方法设计特殊速比函数，可使与主动滚子啮合的从动凸轮廓线不会产生曲率干涉。
The special speed-ratio function designed in this paper can make driven cam profile that meshing with driving roller no curvature interference.
介绍了摆动滚子从动件盘形凸轮机构设计的解析法。
An analytical design method of disk CAM mechanism with oscillating roller follower is introduced.
当凸轮机构主要用于传递运动时，基圆半径的选择可使滚子做连续滚动为优先考虑条件。
When the CAM is chiefly transferred movement, the choice of radius of base circle firstly is considered the roller's continuous rolling.
本文详细分析了对心滚子移动从动件盘形凸轮机构接触应力的计算方法，并给出具体计算例题。
In this paper, the calculating method for the contact stress of plate CAM mechanism with translating roller moving follower is presented, and some examples are given.
介绍了圆锥滚子蜗杆凸轮机构的轮廓曲面方程的建立、压力角和啮合曲面法曲率的计算过程。
This paper describes the establishing process of the equation of working profile curved surface of worm CAM mechanism, the calculation of its pressure Angle and normal curvature.
介绍了自动换刀装置的换刀过程、滚子齿形凸轮机构的运动循环图设计，并进行了分析。
On the basis of the motion graph, the roller-gear-cam and driven roller in ATC are given a motion analyze.
通过对空间凸轮机构各种从动件滚子的研究，给出了不同类型滚子的统一数学表达模型。
Through studying various types of rollers of a spatial CAM mechanism, the paper presented their unified mathematical expression models.
最开始是一辆七十年代的蒙特卡洛轿车。尼克用高扬程滚子凸轮和赛车级活塞把它的350发动机做了改装。
The first was a '70 Monte Carlo, whose 350 engine Nick had beefed up with a high-lift roller cam and racing pistons.
总结了滚子齿形凸轮的特点及其在自动换刀单元（ATC）中滚子齿形凸轮的结构形式。
Summarize the characteristics of roller-gear-cam and structure in ATC. Introduce the tool change process of automatic tool change, draw the motion circle graph.
文中以滚子摆动从动件平面凸轮为例，其解题方法也适用于其它类型平面凸轮机构。
The case of a plate CAM with an oscillating roller follower is taken as an example. This method is also applicable to other types of plate CAM system.
共轭凸轮、叉形摆杆和固定在 叉形摆杆上的两个滚子组成共轭凸轮机构。
The conjugate cam, a fork-shaped swing rod and two rollers fixed on the fork-shaped swing rod form a conjugate cam mechanism.
本文较为全面系统地推导了摆动滚子从动件圆柱凸轮的廓线、压力角及廓线曲率半径方程，并讨论了该种凸轮机构在各种运转情况下与之相适用的方程。
Mathematical formulas are derived comprehensively and systematically for the profile coordinate, pressure Angle and radius of curvature of the cylindrical CAM with an oscillating roller follower.
在现代高速自动机中 ，经常使用蜗杆凸轮—滚子齿轮间歇分度传动机构。
In modernized high-seed automatic machine, often used the intermittence and graduation transmission mechanism with worm-cam and roller-gear.
共轭凸轮、叉形摆杆和固定在叉形摆杆上的两个滚子组成共轭凸轮机构。
The conjugate CAM, a forked swing link and two rollers fixed on the forked swing link form a conjugate CAM mechanism.
介绍了复极矢量法的基本原理，并通过对曲柄滑块机构和直动滚子从动件平面回转凸轮机构的运动分析，介绍了复极矢量法在机构运动分析中的应用。
This article develops a software to simulate and analyze the movement of planar linkage with single degree of freedom by using the method of complex vector.
滚子推杆凸轮机构中滚子转动中心的轨迹连线。
滚子推杆凸轮机构中滚子转动中心的轨迹连线。
应用推荐