标签薄膜溶胶-凝胶工艺外延生长电性能。
BST thin films sol gel technique epitaxial growth electrical properties.
本研究利用改进的溶胶-凝胶工艺合成了介孔硅基干凝胶。
The mesoporous silica-based xerogel had been synthesized using improved sol-gel method.
报道了溶胶-凝胶工艺制备的KDP晶体保护膜、增透膜和它们的性能。
In this paper, we report the preparation and performances of the sol gel antireflective and protective coatings on KDP crystals.
溶胶凝胶工艺尤其适合制作传统的熔融法不能或不易获得的功能陶瓷纤维。
Solgel process was specially suitable for preparing the functional ceramic fibers which was very difficult or even could not be obtained by the conventional melting method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
为了制备高温气冷反应堆用燃料芯核，致密uo_2微球，研究了一种新的溶胶-凝胶工艺。
A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute.
文章论述了自动压力凝胶工艺生产中的注料过程，介绍了一种有效的自动注料系统的设计思想。
The paper introduces the material feeding process in automatic pressure gel technology production presenting an effective, automatic material feeding system design thinking.
本文介绍应用溶凝胶工艺制备离子传感器的敏感材料NASICON，并与传统的陶瓷工艺作了比较。
The NASICON sensitive materials for ionics sensors were prepared by sol-gel process and the process was compared with the conventional ceramic process.
以间苯二酚和甲醛为原料，采用溶胶-凝胶工艺，结合高温碳化和溶剂替换常压干燥技术，制备了碳气凝胶。
Carbon aerogels were prepared from resorcinol and formaldehyde via sol-gel process, high temperature carbonization and atmospheric pressure drying technology with solvent replacement.
在干燥阶段维持凝胶织构可使得干燥凝胶具有一些特殊的性质和用途，也是溶胶-凝胶工艺中的关键问题之一。
Preserving gel texture during the drying step, which is one of the main problems of Sol gel process, can make drying gels have a lot of special properties and applications.
用醋酸锂和乙醇钽作为起始反应物，通过溶胶凝胶工艺生成了对红外敏感的钽酸锂薄膜，并详细讨论了基于钽酸锂薄膜的红外探测器件制备工艺。
The LiTaO3 thin film was chosen as infrared sensing film and prepared by a sol-gel process using lithium acetate and tantalum ethoxide as starting materials.
采用正交试验方法重点考察了炭化工艺条件对炭气凝胶结构和性能的影响。
The effects of operating condition of carbonization on structure and properties of carbon aerogels are investigated by orthogonal experiment.
凝胶注模成型技术是一种近净尺寸陶瓷成型技术，它为解决陶瓷材料的加工成型问题提供了一条十分有效的工艺途径。
Gelcasting is a novel and near net-shape forming technique for ceramics, which has provided an effective approach for resolving difficulties of machining and forming for ceramics.
研究了芦荟凝胶汁脱色工艺并优选其脱色条件。
The extracting and decoloring technique of aloe gel liquor and optimum decoloring conditions were studied.
实验中通过改进工艺条件制备了一系列的碳气凝胶。
Several kinds of carbonized aerogels are prepared according to the modified technology process.
在固化工艺方面，研究了固化剂含量和固化温度对于凝胶时间的影响。
As for curing process, the influence of dosage of curing agent and curing temperature on gel time was investigated.
目的：优选复方环丙沙星凝胶基质组成及制备工艺。
OBJECTIVE: To optimize base material compositions and preparation technology for compound ciprofloxacin gel.
采用真空干燥的方法，探索钛酸丁酯凝胶的干燥工艺条件。
The drying process conditions is studied on the Titaium tetrabutaoxide gel by vacuum drying method.
采用水基凝胶流延工艺制备四方多晶氧化锆薄膜，确定合理的烧成制度，并考察薄膜的显微结构与烧结性能。
The present work was to determine the optimum sintering system and properties of the nanometer tetragonal polycrystalline zirconia green body by the aqueous gel tape casting process.
研究了芦荟凝胶冷冻干燥粉生产工艺。
目的：采用星点设计-效应面法优选消疮凝胶剂的提取工艺。
Objective: To optimize the extraction craft of Xiaochuang gel by central composite design-response surface methodology.
该项技术在低温下合成，可有效防止凝胶的开裂，缩短工艺周期。
This technique has been proved to be effective in preventing the gel cracking and shortening the period of the process.
本文对陶瓷刚玉磨料干凝胶颗粒进行形状控制的造粒工艺进行了研究，对影响造粒的主要参数进行了讨论。
The granulation process of ceramic corundum abrasives by dry process was investigated and the main parameters which influence the granulation process were discussed in this paper.
目的：研究葡萄糖酸钙凝胶剂的处方组成、制备工艺及质量标准。
Objective:To study the formulation, preparative method and quality control of calcium gluconate gel.
优化了柠檬酸盐凝胶法制备纳米氧化镍粉体的工艺条件。
The optimum process for preparing nanometer nickel oxide by the citrate-gel method was studied.
目的：优选红藤凝胶的提取工艺。
OBJECTIVE : To optimize the extraction technology of Hongteng suppository.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
目的：优选红藤凝胶的提取工艺。
OBJECTIVE: to optimize the extraction technology of Hongteng liquid suppository.
综述了多组元复合功能陶瓷粉体制备技术的研究进展，较详细地介绍了新出现的凝胶相反应合成法的工艺及其特点。
Progress in study on synthesis technique for multi-component functional ceramics powder is re- viewed. A novel synthesis technique, gel solid state reaction method, is described in detail.
目的筛选紫黄凝胶的最佳提取工艺。
Objective To screen the best extraction method of Zihuang gel.
应用推荐