重力钢化炉的成型、钢化主要是将玻璃加热软化，玻璃在重力作用下沿成型胎边框模周边下弯成型，再将玻璃由加热炉移至急冷设备风栅间淬冷钢化。
Glass was heated to its softening point and reshaped in mold under its gravity in heating furnace, then was sharp quenched by cold blast immediately.
通过理化检测，对铆螺钢在冷镦时出现开裂的原因进行了分析。
These inclusions resulted in cracking of the cold forging steel during the cold heading process.
压榨后，葡萄汁在华氏60度左右的冷温下于不锈钢桶里进行长达十二天的发酵。
After crushing, the must was fermented for up to twelve days at cool temperatures, around 60 degrees Fahrenheit, in stainless steel tank.
本文针对空冷支架结构体系中典型的空间钢桁架节点进行了抗震性能试验研究。
In this paper, the seismic behavior of a typical joint in the air-cooled condenser structure system is researched.
专业从事生产各种牌号的冷拔不锈钢无缝钢管，全线采用具有国内先进水平的工艺加工。
Professional engaged in the production of various grades of cold-drawn stainless steel seamless steel tubes, all used with the domestic advanced level of processing.
本文研究了热镀锌及镀后冷拔对高强度双相钢钢丝力学性能的影响。
The influences of liquated zincing and cold-drawing on the mechanical properties of high strength dual phase steel wires have been investigated.
电路依靠喷铝部连接起来，用不锈钢弹簧夹子固定在冷端部的周围。
Electrical connections are made using flat aluminum braids, held in compression to the cold end circumference by stainless steel spring clamps.
结果表明，TCS钢具有良好的抗冷裂敏感性和抗结晶热裂敏感性能。
The results showed that TCS steel had good cold cracking resistance and crystal hot cracking resistance.
针对不锈钢冷渣器的制造技术进行归纳和总结，对制造过程中的难点进行分析和说明。
This article summarize the technology of manufacture on stainless steel ash cooler, analyse and explain the key points in manufacture process.
以SWRCH18A钢为例介绍了湘钢二炼钢厂含铝冷镦钢的生产工艺。
The technological process of the Al killed cold heading steel SWRCH18A in the No.
通过对铆螺钢的成分与组织检验，对铆螺钢在冷镦时出现开裂现象的原因进行了分析。
The reason of cracking phenomenon occurring of the cold forging steel was analyzed by the composition and microstructure tests.
用此工艺参数修复船用不锈钢油冷套，加之合理的喷涂工序与材料匹配，达到良好的修复效果。
A good repairing result was obtained by combining reasonable spraying process and material matching with this parameter in repairing oil cooling set of stainless steel.
针对45钢冷拔厚壁管存在内表面横裂纹问题，分析了其产生的原因。
The causes of inner transversal crack of cold-draw heavy wall pipe of 45 steel were analyzed.
冷镦钢盘条一般为低、中碳优质碳素结构钢和优质合金结构钢，用来冷镦成型制造各种机械标准件和紧固件。
The cold heading steel coil generally is low and medium carbon quality steel and alloy structure steel to manufacture various standard mechanical element and fastener by cold heading forming.
通过测量硬度和观察组织，确定了几种冷变形钢的再结晶温度及其影响因素。
The recrystallization temperature of cold deformed steels and its influencing factors have been studied by measuring hardness values and structure observation.
本文主要介绍了空冷贝氏体钢在重型汽车前轴上的应用研究，探讨了影响强度与韧度的一些因素。
The article mainly introduces the application of air - cooling bainite steel at heavy truck front axes and discusses some factors affecting strength and toughness.
简述了冷镦和冷挤压用钢国家标准修订说明中的一点儿问题。
Describe some questions of the national standard modification statement of steel for cold heading and cold extruding.
采用七种高纤维素型立向下电焊条，通过斜y坡口裂纹实验，对高强管线钢的冷裂敏感性进行实验研究。
The cold cracking sensibility of high tensile pipeline-steel was studied by Ygroove cracking test using seven kinds of high cellulose electrode of vertical down position welding.
通过理化检测，对铆螺钢在冷镦时出现开裂的原因进行了分析。
The reason of cracking for the cold forging steal was analyzed by physical and chemical tests.
通过分析半钢冷锭加热裂纹产生原因，以及对半钢冷锭加热速度进行理论计算，制订了切实可行的加热工艺曲线。
Analyzing the reasons of semi-steel cold ingots crack occurred in heating and theoretically calculating heating speeds of semi-steel cold ingots, a practical curve of heating process is worked out.
冷镦钢是一种在室温条件下，利用金属塑性成型工艺，生产互换性较高的标准件用钢。
Cold forge steel is a kind of special use of steel which can be used to produce the standard part in the room temperature.
简述了冷镦和冷挤压用钢国家标准的修订内容。
Describe the content modification of national standard for cold heading and cold extruding.
试验表明：该钢空冷条件下即可获得准贝氏体、板条马氏体及孪晶马氏体的复合组织，且具有较好的强韧性配合。
The results indicated that the steel is composed of quasi bainite, lath martensite and twin martensite under air cooling condition, and also has better combination of strength and toughness.
通过分析热连轧不锈钢表面冷划伤和热划伤的产生过程和危害。
Analyse the emerging process and harm of hot scratching and cold scratching on the surface of hot rolling stainless steel.
模拟钢轨焊接及焊后热处理工况，采用热膨胀方法分别测定uic 900a及u75 V钢轨钢的连续冷转变曲线(CCT曲线)。
By simulating welding and simulating heat treatment after welding, CCT Curves of UIC900A and U75V rail steels are determined by the expansion method.
冷扎钢，电梯型材，车厢板，电气结构件制造，销售，五金配件，带钢购销。
Lengzha steel, elevators reach, train boards, electrical structural equipment manufacturing, sales, hardware accessories, strip steel procurement.
本文用电镜观察、拉伸试验、硬度试验、差热分析等方法研究了45钢冷形变后的预多边化处理对随后的回复、再结品过程的影响。
Studies the effect of the pre-polygonization heat-treatment on the recovery and recrystallization of cold-deformed steel 45 by TEM, tensile test, hardness test and thermal analysis.
讨论了含钒微合金钢在热轧及加速冷却条件下终轧温度、终冷温度、冷却速度对钢的力学性能的影响。
The effects of finish rolling temperature, temperature of controlled cooling, cooling rates on the microstructure and mechanical properties of V-bearing microalloyed steel have been investigated.
正是在这种情况下，国内钢铁企业开展了冷镦钢的研发和生产，以替代进口，并已取得了一定的进展。
Just in this circs, the research and production of cold forge steel is began in our domestic corporations to replace the import production, and they have gotten some achievement.
介绍了空冷贝氏体钢的优点、分类及应用，展示了空冷贝氏体钢广阔的应用前景。
The advantages, classification and application of air- cooling bainite steel are introduced. A wide applied perspective of air- cooling bainite steel is showed.
应用推荐