这会导致多种效率低下，尤其是当低级缓存内容迁移到具有冷缓存的新处理器时会丢失低级缓存内容。
This leads to various inefficiencies, especially loss of low-level cache contents when moving to a new processor with a cold cache.
也就是，由于它具有高效率的冷切系统和独特形式的因素，它的能耗是其他用于Web 2.0环境下的服务器的40%。
That is, the sever uses 40 percent less power thanks to its efficient cooling system and unique form factor.
但关键问题是如何使冷喂料挤出均匀加热，如何保证挤出质量，提高挤出效率。
The key is how to heat up the cold feed extruder equably and improve extrusion efficiency.
如何有效提高LNG冷能利用效率一直是人们关注的课题。
How to effectively improve the efficiency of LNG cold energy utilization is a focus at all times.
结果表明，在相同的热源和冷源边界条件下，这一循环的利用效率远高于水蒸汽朗肯循环。
The results show that the efficiency of exergy utilization of this cycle is much superior to that of the Rankine cycle at the same border conditions of both heat and cooling sources.
精铁粉冷压球团成形机是生铁冶炼炉料生产线的关键设备，其轧辊球坑的脱模性能直接影响生产线的正常工作及效率。
The performance of pattern draw of the spherical pits on the roll of the form-machine has direct influence on the regular function and the efficiency of the production line.
用冷辗扩技术生产的轴承套圈比传统工艺生产的轴承套圈平均寿命要长，而且生产效率比传统工艺高。
The bearing's life was extended by high-tech ring produced by cold rolling craft. This craft is more efficient than traditional craft.
试验表明：冷固结球团矿直接还原新工艺具有工艺流程短、基建投资省、生产效率高、能源消耗少等特点。
The experiment showed that the new direct reduction technology had such advantages as short flow, small investment, high efficiency and low power consumption.
运用该指标对某电厂空冷项目实例的实验结果表明：风速、空冷平台柱高和来流风向角对冷凝器的效率有着重要影响。
Result of a practical engineering models show that great wind effects of both wind speed and the angle of the incident flow on the efficiency of the condenser.
国内螺旋吹风式速冻机与国外相比效率低下，其中料口严重跑冷是主要原因之一。
Compared with foreign equipments, those of our domestic are more inefficient, the mess and heat transfer at the entrance and exit is one of the main causes of the energy loss.
通过试验选择了冷法浸出硫酸锰的合理化工艺条件，该法简便易行，可降低生产成本，提高效率。
The method is simple and easy to carryout. It can lower the cost and increase the efficiency of reaction.
冷态模化试验的结果表明，新型水膜除尘器的除尘效率在不改变引风机和水耗的前提下可达到98％ 。
The results of modularization test in cold condition indicates the dust efficiency can reach 98% without changing I. D. fan and water consuming.
本文叙述了与钠净化技术有关的内容，包括钠中杂质浓度、净化理论、冷阱效率和冷阱再生等问题。
The content related to purification technique for sodium is discussed. It includes impurity concentration, purification theory, clod trap, efficiency, regeneration and so on.
沥青路面冷铣刨机是一种高效率的路面修复作业机器。
The cold planer for asphalt pavement is a very efficiency machine for repairing pavement.
本文对不同冷源的一次能源利用效率进行了比较，并且比较了它们对环境影响的情况。
Primary energy efficiency and impact on environment of different cold sources have been compared in this article.
结论：橙皮原料来源丰富，直接冷磨萃取法生产工艺简单，投产快，无污染，提取效率和投产效益较高，值得推广。
Conclusion: Direct cold-mill extraction is simple and there are abundant sources of raw materials, non-polluting, high extraction efficiency and production efficiency, worthy of promotion.
设备和管道的隔热计算十分繁琐和复杂，为提高计算效率和计算的准确性，采用经济厚度计算法，编制了一种具有保温、保冷和露点温度校核等多功能的设备和管道隔热计算程序。
To get more accurate and efficient solution, a computer program based on economical thickness method is developed with functions of thermal insulation, cooling insulation and dew point check, etc.
针对我国智能建筑空调冷源系统运行效率偏低的现状，介绍了管理矩阵控制技术的内容及具体程序。
Aiming at current inefficient operating of chillers, presents the content and control program of the manager matrix control technique.
工业循环水腐蚀、结垢是影响冷换设备换热效率及使用寿命的主要因素。
Corrosion and scaling caused by industrial recycling cooling water are the main factors affecting heat exchange efficiency and equipment lifetime.
实验结果表明：快冷技术具有技术简单和高效率的优越性。
The experimental results indicate: Rapidly quenching technique has an advantage of simple technology and high efficiency.
合成气化学能和冷煤气效率直接影响着整个IGCC电站系统效率，是衡量合成气品质和气化炉性能的关键参数。
Syngas heating value and cold gas efficiency which are the key parameters to evaluate syngas quality and performance of gasifier influenced the efficiency of whole IGCC power system directly.
结果表明，在相同的热源和冷源边界条件下，这一循环的利用效率远高于水蒸汽朗肯循环。
The results show that the efficiency of exergy utilization of this cycle is much superior to that of the Rankine cycle at the same border conditions of both heat and…
对烧结机带冷机余热回收系统存在问题进行了分析，采用无机传热技术对系统进行了改造，大大提高了余热回收效率。
The problems in the sintering cooler waste heat recovering system is analyzed, and the system is reformed using inorganic heat transferring technology. Waste heat recovering ratio is much improved.
在大型冷态试验台上相同的运行工况下，测试了它们的分离器效率及阻力。
Their separation efficiencies and flow resistances were all measured, under the same operating conditions, in a large scale cold state test rig.
低温甲醇洗； 低温液氮洗；冷量；传热效率；
Rectisol; Liquid Nitrogen Wash; Cold flow; Heat transfer efficiency;
主反应器中部分炭转化为氢的系统冷煤气效率可达90%，分析揭示了系统中的热集成情况和能量平衡。
The cold gas efficiency is above 90% for the case that only part carbon is converted in the main reactor. The heat integration and energy balance are analyzed and uncovered.
结果表明：该水刀具有切割效率高、比能耗低、自动化程度好等特点，是一种新型的冷切割设备。
The results prove that the water jet cutter is characterized by its high efficiency, low specific power consumption and fine automation level. Therefore it is a new type of cold cutting machine.
冷态模化试验的结果表明，新型水膜除尘器的除尘效率在不改变引风机和水耗的前提下可达到98%。
The results of modularization test in cold condition indicates the dust efficiency can reach 98% without changing I.
冷态模化试验的结果表明，新型水膜除尘器的除尘效率在不改变引风机和水耗的前提下可达到98%。
The results of modularization test in cold condition indicates the dust efficiency can reach 98% without changing I.
应用推荐