冷却能力不足会造成中暑脱水。
Not enough cooling power could mean heatstroke or dehydration.
研究热管结构对压铸模具冷却能力影响的定量关系。
The quantitative relation between hot pipe structure and cooling ability of partial die casting mould was approached.
以探头表面的温度变化情况来分析淬火介质的冷却能力。
The variation temperatures of the probe surface are used to determine the cooling characteristics of quenching media.
电子淬火仪用于测定淬火介质的冷却能力及工件的相变时间。
The utility model relates to an electronic quenching instrument, which can be used for measuring the cooling capacity of quenching mediums and the phase change time of work pieces.
随浓度增大、温度升高、重复使用次数增多,其冷却能力降低。
The cooling ability decreased with the increase of concentration, temperature and repeated use.
由于锌的实际产能超过设计能力,使锌电解的冷却能力明显不足。
As effective capacity of Zinc production exceeds design capacity, the cooling capacity of Zinc electrolyte is clearly insufficient.
本文介绍了银探头的制造和用该探头测定淬火介质冷却能力的方法。
This paper describes the manufacturing and the evaluating method of the silver probe to determine the cooling power of the quenching liquid.
空冷系统的ACC凝汽器冷却能力大小,对汽机真空有很大的影响。
The cooling capability of Air cooling condenser has very great influence on vacuum of steam turbine.
本文对在淬火油槽内用超声波振动提高油冷却能力的试验进行了研究。
This paper deals with the experimental study of improvement on the oil cooling ability by producing ultrasonic wave vibration in the quenching oil trough.
按此规律调控外冷喷枪的相关参数,将使外冷设备的冷却能力得到充分发挥。
According to the law, it will make the cooling ability of external-cooling equipment to regulate the interrelated parameters of external-cooling spray gun.
同样,通过地板间层空间提供通风可以同时提高地板和下层天花板的冷却能力。
Also, passing supply air through the floor void improves the cooling capacity of both ceiling and floor.
地板、机架和天花板安装模块,再加上选择的冷却能力,适用于任何应用要求。
Floor-mount, rack-mount and ceiling-mount modules, plus a choice of cooling capacities, cover any application requirements.
淬火过程中表面换热系数是反映界面能量传递和介质冷却能力的重要物理参数。
Surface heat transfer coefficient is an important physical parameter which reflects energy transfer of interface and cooling capability of medium.
通过对室外空气焓值的判断,在过渡季节增大新风量,充分利用新风的冷却能力。
And it should be suppose to increase the flow rate of fresh air in transition season which can take advantage of the cooling action of fresh air.
轧机冷床冷却能力的不足,成为产量提高后影响产品质量、制约生产的瓶颈问题。
Not having enough cooling capability of cooling bed becomes the bottleneck in improving the quality of products and restricts the production after the productivity has being increased.
在分析攀钢大方坯连铸现行结晶器冷却能力的基础上,优化调整了结晶器冷却制度。
The existing cooling ability of bloom continuous casting mold at PZH Steel was evaluated, then, the mold cooling process was optimized.
本文证实,适当的高温冷却能够模拟气缸盖壁面喷涂陶瓷的隔热,并可降低柴油机油耗率。
The results of the experiments demonstrated that appropriate high temperature cooling can simulate the ceramic insulation and can reduce the engine fuel consumption.
发动机风扇的设计原则是在满足发动机冷却能力的前提下,提高风扇效率,降低风扇噪声。
The design principles of engine cooling fans are meeting the cooling demands of a engine, improving the efficiency of fans and reducing the fan noise.
喷雾相变冷却是一种高效的冷却技术,具有高热流密度的冷却能力和严格的温度控制能力。
Spray cooling is an efficient cooling techniques, which offers the ability to remove high heat fluxes, and provides uniform device temperatures.
本文介绍了的湿球温度、空气的相对湿度及进水温度的变化对玻璃钢冷却塔冷却能力的影响。
This paper introduces the effect of the change of wet marble's temperature, relative moisture of atmosphere and water temperature on FRP cooling tower's cooling ability.
反应堆能够经得起强大的地震,但是海浪会破坏发电机和后备系统,从而破坏反应堆的冷却能力。
It appeared that the reactors withstood the powerful earthquake, but the ocean waves damaged generators and backup systems, harming the ability to cool the reactors.
但是,当产生的热量渐渐超过目前的冷却能力,会有大量的水变成水蒸气的状态,使内部的压力增大。
But as long as the heat production exceeds the heat removal capacity, the pressure starts increasing as more water boils into steam.
要使中厚板淬火控冷装置获得最佳的冷却能力,必须要保证冲击射流可以穿透钢板表面的滞留水层。
To make quenching and control cooling equipment of plate achieve optimum cooling performance, it is necessary to ensure the impinging jet able to penetrate through the water layer deposited on plate.
本文系统地研究了HQ系列水溶性淬火剂的工艺性能、冷却能力、淬透性、淬硬性和变形开裂倾向。
The following technological properties of aqueous quenching medium series HQ are systematically studied: cooling ability, harden - ability, tendency of deformation and cracking.
当油位低于盘管时,盘管的表面将有结露的水混入液体中,造成液体变质,同时冷却能力也会下降。
Low oil level will result in an increase of condensation on the surface of cooling coil, the mixture of condensation and liquid will deteriorate the liquid and decrease the cooling capacity.
随着氮气压力的提高,气体的冷却能力、工件的冷却速度、工件淬火后的硬度等都得到了不同程度的提高。
With increasing of nitrogen pressure, the cooling capacity of nitrogen, the cooling velocity and hardness of the workpieces after quenching are improved.
该越野车的风扇传动机构是为解决发动机冷却性自主开发的,解决了国外类似车型没有解决的冷却能力不足问题。
The fan transmission-mechanism is independent developed to solve the problem of engine cooling, a similar foreign vehicle has not-solved the problem of pool cooling capability.
该越野车的风扇传动机构是为解决发动机冷却性自主开发的,解决了国外类似车型没有解决的冷却能力不足问题。
The fan transmission-mechanism is independent developed to solve the problem of engine cooling, a similar foreign vehicle has not-solved the problem of pool cooling capability.
应用推荐