对SST102淬火剂的冷却特性进行了探讨。
The cooling characteristics of a quenchant SST102 were investigated.
研究了搅拌速度和搅拌方式对MH介质冷却特性及钢件淬火质量的影响。
The effect of stirring rate and stirring method on the cooling characteristics of MH quenchant and the quenching quality of steel pieces is investigated in this paper.
涡轮叶片内部冷却特性直接影响到叶片的壁面温度分布，必须对其展开详细的研究。
The temperature distribution of the nozzle guide vanes are affected greatly by the flow and heat transfer of the internal cooling passages.
根据计算结果重点对前缘气膜冷却复杂三维流动以及整个叶片的气膜冷却特性进行分析。
Analysis of simulation results emphasizes on the complex 3d flow due to cooling near leading edge and blade cooling characteristics.
对比发现，按测得的冷却特性曲线的形状划分的冷却阶段，与探棒表面实际发生的冷却情况大不相同。
It was found that partition of cooling process according to the measured cooling rate curve is not totally corresponding to what were visually observed.
以抽真空与节流相结合为基础，给出了几种超流氦冷却循环方式；分析了这几种方式的流程机理和冷却特性。
Based on vacuum pumping accompanied with throttling process, presenting several superfluid helium cooling cycles and analyzing their flow principle and cooling characteristic.
通过两种用于齿轮淬火冷却的淬火介质的对比实验分析，讨论了淬火介质的冷却特性对齿轮性能和尺寸变化的影响。
The influence of cooling characteristics of the quenching cooling medium on the properties and dimensions of the gears was discussed through analyzing the quenching process.
利用该模型针对某燃烧室设计进行壁温预测，并进行了三种增大冷气量方法的冷却效果比较，研究了同比例减小孔径和孔间距的冷却特性。
By this model, we compare the cooling effectiveness of three methods and analysis cooling characters when reduce the diameter and pitch of the holes at the same scale.
介绍了聚合物淬火介质的一些共性特点，对新研制成功并已用于生产的WGY型淬火剂的特点及冷却特性进行了描述，并与国内外同类产品进行了比较。
Deals with some common characteristics of polymer quenchants and assesses the cooling behavior of the newly developed WGY medium which is used in production.
我们研究的下一步将关注于冷却系统的效能和特性，使用一套扩展传感系统来检测它，以此进一步改良。
The next step in our research is to focus on the performance and characteristics of the cooling system which will be measured with an extensive system of sensors, in order to optimize it further.
其他我们投入的特性是在设备上采用最先进的电源和冷却管理技术。
Other features we’ve invested in are state-of-the-art power and cooling management technologies in the facility itself.
本文主要内容包括：1、分析冷却运输机滚子链传动的基本原理、结构特点、主要失效形式及载荷特性。
This paper comprises of the following parts: 1, To analyze the basic principle, structural features, main failure types and load characteristics of the roller chain of cooling transporter.
建筑还整合了大量的节能特性，比如尽可能使用自然通风的冷却系统。
It will also incorporate a number of energy-saving features, including a cooling system that USES natural ventilation wherever possible.
由于木结构缺乏保温特性，所需的冷却需要通过隔夜通风来确保交叉通风。
Due to the lack of thermal mass in the wood construction, the required cooling by means of overnight ventilation is ensured by cross ventilation.
本文利用高速摄影仪对具有矩形毛细微槽群结构的加热表面进行喷雾冷却的传热特性进行了可视化实验研究。
In this paper, with high speed camera, the visualization experiments for the heat transfer characteristics of spray cooling on rectangle capillary microgroove groups surface were carried out.
首次通过实验和数值模拟方法研究了具有冷却壁面条件时的下送风通风空调系统的气流流动特性及其影响。
Through experimental and numerical simulation researches on the influence of cooling wall on the ventilation characteristics and the air flow characteristics of UFAD system firstly.
对叶片弦中区内部有、无冲击射流的气膜出流冷却方式中，冷气侧气膜孔局部换热特性进行了实验研究。
Experimental investigation of the turbine blade local heat transfer characteristics at the inner side of the mid-chord region near film holes was conducted, with and without impingement cooling.
介绍了与流化床垃圾焚烧锅炉配套的灰渣冷却分选装置细灰分选特性的试验室试验研究结果，为该装置的合理设计提供了参考依据。
A small scale experimental study about sorting property of fine ash in a ash cool and sort combined facility, which is a auxiliary equipment of CFB MSW incinerator, is introduced in this paper.
论述了风冷发动机冷却风扇的试验法和用无因次特性系数法制取风扇特性曲线的方法。
This paper describes the methods of fan testing and making fan property curve by dimensionless characteristic coefficient for the cooling fan of air-cooled engines.
传统发动机冷却系统由于自身特性影响，其工作性能受到限制。
Conventional cooling system of engine is limited in operating performance for its characteristics.
经过适当的输入变换和动态解耦，结合轧辊的热传输特性，最后获得了简单、实用的轧辊局部冷却控制模型。
By proper transforming of the system input and dynamic decoupling, a simple and useful model for partial cooling control has been obtained on the basis of the thermal transfer characteristic of rolls.
根据盐酸大观霉素的溶解度特性，采用自然冷却法培养出单晶。
Single crystal of spectinomycin dihydrochloride was cultivated by natural cooling method according to its characteristic of solubility.
为了减少煤油在冷却时的结焦析碳，研究乳化煤油在超临界压力工况下传热特性随热负荷变化的规律以及析碳的影响。
Heat transfer and thermal stability characteristics of supercritical emulsified kerosene were studied in order to reduce the deposition of carbon during the cooling of kerosene.
建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。
The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.
根据生产硝酸钾工艺要求与物料特性，设计了用于冷却换热的板式换热器。
Based on the technology requirements of potassium nitrate production and the properties of materials, a plate heat exchanger was designed for cooling and heat exchange.
分析了除湿系统中直接蒸发式表面冷却器在结霜工况下的换热特性，特别是结霜速度、结霜时间以及结霜时的换热计算。
This paper analyzes some heat-exchange characteristics of evaporator on the condition of frosting in the desiccation system, especially of frost velocity, frosting time and heat exchange calculation.
本实验选取航空发动机涡轮叶片中段内部冷却通道为研究对象，对不同肋间距的横肋变截面U型通道的换热特性进行了研究。
The experiment has studied the heat transfer characteristic inside U shaped variable cross-section channels with different rib pitches, The channel is the middle part of a gas turbine blade.
分析环境条件对冷却塔热力特性的影响。
The impact of environmental conditions on the thermodynamic performance of cooling tower was analyzed.
物料加热表面受到对流冷却，并讨论了物料的吸收系数，折射率，导热系数，换热系数，物料表面辐射特性对温度场的影响。
The effects of absorption coefficient, refractive index, heat conductivity, convective heat-transfer coefficient and radiative properties of the surf ace on the temperature field are discussed too.
物料加热表面受到对流冷却，并讨论了物料的吸收系数，折射率，导热系数，换热系数，物料表面辐射特性对温度场的影响。
The effects of absorption coefficient, refractive index, heat conductivity, convective heat-transfer coefficient and radiative properties of the surf ace on the temperature field are discussed too.
应用推荐