高温扩散过程伴随着再结晶过程。
The diffusion process is concomitant with recrystallization.
简述了再结晶过程中晶粒长大的相变驱动力。
The drive force of phase change for HgCdTe growth during recrystallization is briefly described.
当再结晶过程完成时，绝大部分晶界为大角度晶界。
When the recrystallization completes, most of grain boundary is high Angle grain boundary.
这种结构形成于其后工序的塑性变形以及再结晶过程。
This structure is altered during forging by subsequent processes of plastic deformation and recrystallization.
研究了热挤压态MB 26镁合金的静态与动态再结晶过程。
The microstructure of MB26 alloy during static and dynamic recrystallization process was studied.
发现动态再结晶百分比对亚动态再结晶过程没有明显的影响。
It was discovered that there is no distinct influence of percentage of dynamic recrystallization on meta-dynamic recrystallization.
指出，孪晶位错是再结晶过程中，孪晶界面迁移的激活台阶。
It is showed that twin dislocation is the activated step of the migration of twin-plane boundary during recrystallization.
随着加热保温时再结晶过程的进行，钢的强度下降而塑性逐步恢复。
With the development of recrystallization, the strength of the steel decrease and the plasticity resume gradually.
结果表明，该模型能很好地描述无间隙原子钢等温退火再结晶过程。
The result shows that the model can be used to describe the recrystallization process of the interstitial free steel quite well.
釉料在烧制过程中明显地经历了脱水、脱羟基、玻璃化和再结晶过程。
It is clear that during the firing process, the glaze undergoes dehydration, dehydroxylation, vitrification and recrystallization.
分析了二次再结晶过程中高斯取向晶粒与晶粒尺寸的关系及取向差分布；
The Goss oriented grains, their grain sizes and their misorientations to the surrounding grains were analyzed.
通过硬度测量和微观金相观察，研究了钪对铝锂合金再结晶过程的影响。
The effects of scandium on the recrystallization of aluminium-lithium alloy are investigated by measuring the vickers hardness of the testing alloys and by observing their microstructures.
采用真应力一真应变曲线和TEM研究其高温压缩变形中的流变应力行为和它的动态再结晶过程。
The dynamic recrystallization mechanism during hot compress was examined by the true stress-strain curves and TEM.
应用该软件分析了高温合金(GH4169)螺栓镦挤工艺的动态再结晶过程和再结晶的晶粒度分布。
The dynamic recrystallization and recrystallized grain sizes of heading for high-temperature alloy (GH4169) bolt are simulated with this software.
固溶处理温度的高低不仅影响第二相在基体中的溶解程度，还影响合金的回复再结晶过程进行的程度。
The temperature of solid solution treatment affected not only the degree of the second phase dissolved in the matrix alloy, but also the recovery and recrystallization processing level of the alloy.
采用＂中断法＂研究了取向硅钢二次再结晶过程中的异常长大行为，确定了二次再结晶发生的温度范围。
The secondary recrystallization and its temperature range of grain oriented silicon steel have been studied by the method of interrupting secondary recrystallization annealing.
结果表明：经电脉冲处理的纯铜再结晶过程向高温区推移，使纯铜的热稳定性、耐热性能得到了改善。
The results show that the recrystallizing temperature of pure copper are raised to a higher temperature range, which improves the thermal stability and bearing resistance to high temperature.
运用高温金相和TEM方法，对超高强度钢300m的奥氏体相变再结晶过程和新晶界进行了定位观察。
In the present paper, both the process and new grain boundary of austenite recrystallized of 300m ultra high strength steel have been Oserved in-situ by means of high-temperature metalloscope and tem.
缓慢的结晶过程会给出十分纯的晶体，在光学活性的研究中，这些晶体很可能不需要进行再结晶了。
Slow crystal formation gives quite pure crystals that probably need not be recrystallized for the optical activity studies.
再结晶和晶粒长大过程是制作金属材料最重要的物理冶金过程之一。
Recrystallization and grain growth process is one of the most important physical metallurgical processes to produce metal materials.
这个折点的出现可能与变形过程中的动态回复与再结晶有关。
During deformation, because of dynamic recovery and recrystallization, a turning point appears on the curve of true stress with temperature and strain rate.
在超塑性变形过程中发生发生连续回复和再结晶，导致原始大晶粒组织经超塑性变形后的显著细化。
The initial large grain microstructure became much finer after superplastic deformation. The large grained superplastic phenomenon could be explained by continuous recovery and recrystallization.
分析了热模拟变形过程中的非均匀应变对奥氏体动态再结晶及晶粒尺寸的影响。
The effect of uneven distribution of strain during compression on dynamic recrystallization and grain size of austenite was analyzed.
在再结晶温度下，湮没特征表现为连续回复过程。
At the reerystall temperature, the feature of annihilation appears as continual recovery process.
采用基于动态再结晶的元胞自动机模型模拟分析AZ91镁合金热压缩过程中的流变行为及组织演变。
The cellular automata(CA) model with dynamic recrystallization(DRX) is proposed and used to investigate the flow behavior and microstructure evolution during hot compression of AZ91 alloy.
这种粘结实质是切削过程中刀具与工件元素之间的相互扩散及形成再结晶所致。
In fact the cause of adhere mechanism is the diffusion between the elements of the cutter and workpiece as well as the re-crystallization.
实验结果表明，在DSC扫描过程中试样经历了连续熔化与再结晶的过程。
Experimental results indicate that the sample undergoes a process of continuous melting and recrystallization during DSC scanning.
此影片让你用一种溶剂与两种溶剂的再结晶方法从溶解度测试到冷过滤来经验此过程。
This video walks you through the procedure, from solubility tests to cold filtration, with information on one-solvent and two-solvent recrystallizations.
结果表明，预处理过程中发生的静态回复与再结晶可以达到细化晶粒的目的。
The result shows that, static recovery and recrystallization can refine grain size in the process of pretreatment.
稀土铝箔的再结晶经历了回复、再结晶和晶粒长大三个过程。
The rare earth aluminum foil recrystallization has experienced three processes:recovery, recrystallization, and the crystal growth.
应用推荐